Application Scenarios
In a typical motor control center (MCC) feeding multiple 30–45 kW induction motors via variable frequency drives, an unexpected line-to-line short can cause upstream damage if not cleared fast enough—or go unnoticed if the failed fuse cannot be identified during a walk-through inspection. By installing the 63NHG00B-690 in NH00 fuse switch-disconnectors on each feeder, the maintenance team gains instant visual fault detection: when the fuse operates under fault conditions, the top-mounted striker pops out and the front indicator window changes color. During routine patrols, technicians can spot the blown element in seconds, isolate the affected circuit, and replace only the failed link—dramatically reducing mean time to repair (MTTR) and preventing unnecessary downstream troubleshooting. The 63NHG00B-690 thus solves two critical pain points: dependable 120 kA short-circuit interruption and unambiguous local fault indication in dense, multi-circuit panels.
h2 Parameter
| Main Parameters | Value/Description |
|---|---|
| Product Model | 63NHG00B-690 |
| Order Code / Article No. | 3ABD0001782 |
| Manufacturer | ABB (ABB SACE / ABB Low Voltage & Drives Division) |
| Product Category | Low Voltage HRC Fuse-link (NH / DIN System) |
| Construction Size | NH00 (Size 00) — approx. 78×52×30 mm (Compact footprint for branch circuit protection) |
| Rated Current (In) | 63 A (Continuous carrying capacity) |
| Rated Voltage (Un) | AC 690 V (Suitable for 400/500/690V three-phase systems) |
| Utilization Category | gG / gL (IEC 60269-2-1) (Full-range protection for cables & general equipment) |
| Breaking Capacity | 120 kA (High rupturing capacity for industrial networks) |
| Fuse Status Indicator | Dual Combination Indicator — mechanical striker (top) + colored front window flag (Clear blown-fuse identification) |
| Contact Type | Knife-blade contacts with optional live gripping lugs (Secure fit in standard NH bases) |
| Compliance Standards | IEC 60269-1 / IEC 60269-2-1, DIN 43620, VDE 0636-2 |
| Operating Temp. Range | -25 °C to +70 °C (ambient) (Industrial-grade thermal stability) |
h2 Technical Principles and Innovative Values
- Innovation Point 1 — Combination Dual Blown-Fuse Indication: Unlike basic fuse-links with only a single indicator, the 63NHG00B-690 integrates both a spring-loaded mechanical striker (activates upon element melting to physically pop out, usable to trip auxiliary micro-switches in some holders) and a high-contrast front-window color-change flag. This dual approach guarantees that fuse failure is visible both locally (by sight) and can be leveraged for remote alarm schemes in compatible NH switch-disconnectors.
- Innovation Point 2 — 120 kA Rupturing Capacity with Silver-Element Arc Quenching: The internal silver-wire/copper-strip element is precisely calibrated and embedded in high-purity quartz sand inside a ceramic body. Upon short-circuit, the sand rapidly absorbs arc energy, extinguishing it within milliseconds even at prospective fault currents up to 120 kA—far exceeding typical panel-level requirements and protecting downstream cabling from thermal damage.
- Innovation Point 3 — NH00 Compact Form Factor with Live-Gripping Lug Option: The 63NHG00B-690 is dimensioned to NH00 standard (Size 00), allowing direct interchange with other NH00 links in existing fuse bases or ABB Safeline/Safering switch-fuse units. Insulated metal gripping lugs (where specified) improve safe handling with fuse pullers and reduce contact resistance at the blade terminals.
Reviews
There are no reviews yet.