ABB INICT13A Cnet/Infi-Net to Computer Transfer Module with RS-232-C and SCSI Ports

Status: In Stock

The ABB Bailey INICT13A is an Infi-Net to Computer Transfer Module (ICT) manufactured by ABB (originally Elsag Bailey Process Automation / Bailey Controls) for the INFI 90 OPEN and Symphony Harmony distributed control systems. It occupies one slot in the Harmony Module Mounting Unit (MMU) and serves as the command-driven data bridge that decodes INFI-NET / Control-Network (Cnet) ring traffic and delivers it to a host computer over RS-232-C or SCSIrms-dcs.com+1.

Working in tandem with the INNIS01 Network Interface Module on the network side and the IMMPI01 Multifunction Processor Interface on the computer side, the INICT13A packages process information into efficient point-based messages so that Composer engineering tools, Conductor operator stations, and third-party OPC servers can read and write INFI 90 data in real timeinfi90.com+1.

ABB INICT13A Cnet/Infi-Net to Computer Transfer Module with RS-232-C and SCSI Ports插图

 

Application Scenarios

In a 600 MW supercritical coal-fired unit commissioned in the late 1990s, the original Bailey INFI 90 DCS is still in production control, but the plant’s new asset-management and performance-computing layer runs on a modern Windows server that has to sample 8,000+ process points every scan cycle. Without a reliable Cnet-to-computer interface, the only route would be to hand-pick values from operator console exports — slow, error-prone, and unusable for closed-loop optimization. By placing an INICT13A Infi-Net to Computer Transfer Module in the same Harmony cabinet as the existing INNIS01, wiring the 60-pin ribbon to an IMMPI01, and landing on an NTMP01 termination unit that feeds the OPC server, the integration team gives the historian and the optimization package a first-class, point-addressed, exception-reported data source straight off the INFI-NET ring. The INICT13A becomes the single point of contact between the legacy DCS and the modern IT layer — exactly the role it was designed forinfi90.com+1.

 

Parameter

Main Parameters Value / Description
Product Model ABB Bailey INICT13A
Manufacturer ABB (Bailey Controls / Elsag Bailey Process Automation)
Product Category Infi-Net to Computer Transfer Module (ICT)
Host System Bailey INFI 90 / INFI 90 OPEN / Symphony Harmony DCS
Network Interface INFI-NET (10 Mbaud unidirectional token-passing ring) via INNIS01
Computer Ports RS-232-C serial (up to 19.2 kbaud) and SCSI parallel (4 Mbytes/sec) via IMMPI01
Point Capacity Up to 30,000 point definitions (depending on point type)
Memory 512 kbytes ROM + 2 Mbytes RAM on-board
Power Supply +5 VDC from MMU backplane
Current Draw ~2 A / 9.8 W typical
Mounting Single slot in Module Mounting Unit (IEMMU11/12/21/22) with latching faceplate screws
Configuration Onboard DIP-switch matrix for node address; software command-driven
Front Panel Indicators 17 status LEDs + stop/reset pushbutton
Host Cable 60-pin ribbon cable INICT13A P5 → IMMPI01 P6
Termination Units NTMP01 (RS-232-C, DTE/DCE selectable) or NTCL01 (Cnet coax/twinax)
Message Types Broadcast, time-synchronization, multicast, NIS poll; CRC + checksum protected
Operating Environment Standard Harmony rack, non-corrosive, ESD-sensitive handling required
Lifecycle Status Discontinued / legacy product; serviced through surplus and repair channels

    Reviews

    There are no reviews yet.

    Be the first to review “ABB INICT13A Cnet/Infi-Net to Computer Transfer Module with RS-232-C and SCSI Ports”
    Review now to get coupon!

    Your email address will not be published. Required fields are marked *

    Back to Top

    Search For Products

    Product has been added to your cart