Schneider 140ACI05100SC 32-Channel Analog Input Module for Modicon Quantum PLC

Technical Specifications

Main Features and Advantages

Thirty-two channels in one slot, which changes the rack economics: The most compelling reason to specify the Schneider 140ACI05100SC​ is density. At four times the channel count of a standard Quantum analog card in the same single slot, it collapses what would be four modules, four terminal blocks and four sets of field wiring into one position. On a large water-treatment or district-energy project with hundreds of analog points, that reduces backplane count, cabinet width, marshalling labour and spare-parts inventory in a single stroke — and on an expansion project where the rack is already full, it is often the only way to add channels without adding a drop.Group-of-eight flexibility rather than one range for the whole card: The Schneider 140ACI05100SC​ is configured in four groups of eight channels, so one group can be taking 4–20 mA from pressure transmitters while another reads ±10 V from position feedback devices. Mixed-signal panels that would otherwise need a current card alongside a voltage card are handled by a single module, and the per-group arrangement keeps the common connections sane for the wiring contractor.Accuracy that survives the ambient: The accuracy figures are quoted across the full 0–60 °C span, not just at laboratory temperature. That distinction matters in a non-air-conditioned cabinet or a summer peak, where a module specified only at 25 °C will quietly drift. With ±0.05 % maximum error in voltage mode over the whole range, the Schneider 140ACI05100SC​ comfortably supports custody-adjacent measurement, dosing control and emissions monitoring.Per-channel diagnostics visible from across the room: Thirty-five front-panel LEDs mean that a technician can identify a failed channel, a disabled channel or a channel sitting outside its range limit without opening a programming terminal. A blinking channel LED flags an over-range condition directly at the module, and a blink-coded Fault LED identifies self-test failures by number — turning what is usually a laptop-based diagnostic exercise into a five-second visual check.

Application Field

Water and wastewater treatment: The Schneider 140ACI05100SC​ is a natural fit for plants with large analog populations — multiple turbidity, pH, chlorine residual, dissolved-oxygen and level transmitters spread across filter beds, clarifiers and pumping stations. High channel density matches the point count, while group-level range configuration lets the same module serve both 4–20 mA analyser loops and voltage-output flow meters.Power generation and utilities: In substation and cogeneration monitoring, the Schneider 140ACI05100SC​ acquires voltage and current transducer outputs, bearing and winding temperature signals, and generator auxiliary measurements. Its selectable notch filtering is valuable here, where 50 or 60 Hz mains-borne interference is the dominant noise source and a fixed filter would either pass the hum or blunt the measurement.Oil, gas and petrochemical: Wellhead instrumentation, pipeline pressure and temperature monitoring, tank farm level acquisition and offshore platform panels all benefit from the Schneider 140ACI05100SC, particularly where a project is retrofitted into an existing Quantum rack with no free slots for additional single-function cards.Building automation and district energy: Chiller plant optimisation, air-handling loops, BTU metering and energy monitoring generate exactly the pattern of many low-cost analog points that the Schneider 140ACI05100SC​ handles most economically, and the 10,000-count DVM data format simplifies scaling to engineering units in the PLC.Food, beverage and pharmaceutical: CIP skid monitoring, tank level, batch temperature profiling and hygienic process instrumentation all sit within the module’s range set, and group configuration avoids dedicating separate cards to each signal type.