Description

The Ameritec AM2-A is a compact, battery-powered digital transmission test set engineered for installation, maintenance, and troubleshooting of T1 (1.544 Mbps), E1 (2.048 Mbps), and J1 (Japan variant) circuits in telecommunications and industrial control networks. As a dedicated DS1/PDH analyzer, the AM2-A delivers comprehensive bit error rate (BER) testing, alarm generation, loopback control, and performance analysis compliant with ITU-T G.821. G.826. and ANSI T1.107 standards—making it indispensable for carriers, utilities, and system integrators managing mission-critical leased lines or legacy backhaul infrastructure.

Application Scenarios

At a North American electric utility modernizing its substation telemetry network, engineers relied on aging copper T1 links to carry SCADA data between remote RTUs and the control center. After repeated unexplained outages, field crews deployed the Ameritec AM2-A to qualify each circuit. Within minutes, the device detected intermittent CRC errors correlated with nearby switching transients—a condition invisible to standard ping tests. By running a 24-hour G.826-compliant stress test with the AM2-A, they proved the line failed SLA thresholds, compelling the telecom provider to replace degraded cabling. The utility avoided weeks of guesswork and restored NERC CIP-compliant data integrity—all thanks to the precision diagnostics of the AM2-A.

Parameter

表格

Technical Principles and Innovative Values

Innovation Point 1: True Dual-Mode Protocol Awareness – Unlike generic BER testers, the AM2-A intelligently decodes framing structures (e.g., ESF vs. D4) and extracts FDL messages, enabling active participation in carrier loopback sequences without disrupting live traffic.

Innovation Point 2: Industrial-Grade Resilience – Built for substations, rail yards, and cell towers, the AM2-A withstands EMI, humidity, and temperature swings that would cripple consumer-grade tools—ensuring reliability where network uptime is non-negotiable.

Innovation Point 3: One-Touch Compliance Reporting – With a single button, the AM2-A executes pre-defined G.821/G.826 test plans and generates pass/fail summaries—accelerating service turn-up and SLA validation for field technicians.

Innovation Point 4: Legacy Network Lifeline – As carriers sunset PDH, the AM2-A remains critical for industries still dependent on T1/E1 for SCADA, protection relays, and voice trunks—providing the only cost-effective way to maintain these systems without full migration.

Application Cases and Industry Value

In a European railway signaling upgrade project, legacy E1 links carried interlocking commands between wayside cabinets. During acceptance testing, the Ameritec AM2-A identified timing slips caused by mismatched clock sources—a subtle flaw that could have led to signal misinterpretation. Correcting the sync hierarchy before go-live prevented potential safety hazards. Similarly, at an oil & gas pipeline SCADA hub in Canada, the AM2-A’s ability to simulate RAI (Remote Alarm Indication) helped validate end-to-end fault propagation across 12 repeater sites, ensuring operators received timely alerts during line cuts.

Related Product Combination Solutions

Ameritec AM2-B: Enhanced version of the AM2-A with Ethernet/IP testing capabilities for hybrid TDM/IP networks.

Viavi T-BERD/MTS-2000: Successor platform offering OTDR, Ethernet, and SONET/SDH in addition to T1/E1—ideal for multi-technology teams.

RAD FCD-100: T1/E1-to-Ethernet demarcation device often tested using the AM2-A during service handoffs.

ABB TB5xx I/O Systems: Frequently connected via T1/E1 leased lines in remote plants—validated by the AM2-A for communication integrity.

GE Multilin UR Series Relays: Use T1/E1 for peer-to-peer tripping; the AM2-A ensures link BER stays below 10⁻⁹ for protection reliability.

Cisco 1841 Router with WIC-1DSU-T1-V2: Common edge device whose T1 interface can be loop-tested using the AM2-A.

Fluke Networks OptiView XG: For layered validation—AM2-A tests Layer 1. while OptiView handles IP-layer diagnostics.

Telco Alarms Panel (e.g., DPS Telecom NetGuardian): Integrates T1 fault inputs often verified during commissioning with the AM2-A.

Installation, Maintenance, and Full-Cycle Support

The Ameritec AM2-A requires no installation—simply connect it in-service (via monitor mode) or out-of-service (as master/slave) using the appropriate cable (RJ-48 for T1. BNC for E1). Its intuitive menu-driven interface allows even novice technicians to run BER tests, insert alarms, or activate loopbacks within minutes. Firmware updates are rare but supported via serial port.

For long-term reliability, we recommend annual calibration and battery replacement every 2–3 years. All units we supply undergo full functional verification: BER accuracy (<10⁻¹²), alarm generation, FDL response, and physical connector integrity. Each AM2-A includes a protective carrying case, test leads, and a quick-reference guide.

Backed by our 12-month warranty and technical support from ex-telecom field engineers, we ensure your Ameritec AM2-A remains a trusted asset in maintaining the “last mile” of critical infrastructure.

Contact us for a customized solution—whether you’re certifying a new T1 circuit, troubleshooting intermittent SCADA dropouts, or maintaining legacy industrial networks, the Ameritec AM2-A delivers carrier-grade precision in a field-ready package.