Description

The Baldor DBTS10-200-7 is a high-performance servo drive/control amplifier from the DBTS/RL series by Baldor(Asea Brown Boveri).It’s designed for driving brushless AC motors,delivering precise speed or torque control in industrial motion control,automation,or machine tool applications.Capable of handling demanding dynamic loads,this drive ensures smooth operation,tight control,and rugged reliability.(Note:versions such as DBTS10-200-7.5-24-RL-PAA correspond to nearly the same family with specific voltage/current/rack formats.)

Parameter

Here are the key parameters for Baldor DBTS10-200-7/DBTS10-200-7.5-24-RL-PAA:

Parameter Value/Description

Product Model DBTS10-200-7(also DBTS10-200-7.5-24-RL-PAA in full spec)

Manufacturer Baldor/Asea Brown Boveri(ABB Baldor Reliance)

Product Category Servo Drive/Amplifier(for brushless AC motors)

Power Rating/Current Nominal current~200 A(200 stands for approx.current rating)at appropriate DC bus voltage in the DBTS10-200 series

Supply Voltage/DC Bus~24 V auxiliary control supply;main drive accepts specified higher AC/DC bus(details depend on specific RL/PAA variant)

Control Inputs Tachometer/encoder feedback;digital&analog inputs;RS-422/485 serial interface for setup&monitoring

Operating Temperature Industrial temperature ranges(approx-20°C to+60°C typical)per DBTS spec sheet

Physical Size/Weight Approx 10 lbs(~4.5 kg)for version“DBTS10-200-7.5-24-RL-PAA”

Radwell International

Mounting/Format Rack/RL format(“RL-PAA”suffix indicates rack low-power/low profile variant)

Protections Over-current,regeneration handling,thermal protection,possibly internal rectifiers etc.(standard for servo drives of this type)

Technical Principles and Innovative Values

Innovation Point 1:Closed-loop brushless AC motor control with encoder/tach feedback—DBTS10-200-7 maintains tight speed and torque control even under changing loads,reducing overshoot and improving stability.

Innovation Point 2:Regeneration/energy recovery built in.When the motor decelerates or is driven by load,the drive handles regeneration energy safely—reducing waste and protecting power supply.

Innovation Point 3:Modular rack(RL format)design.It enables compact installation,easier heat dissipation,and easier replacement/servicing.The“RL-PAA”variant tends to be lower-profile.

Innovation Point 4:Diagnostic and setup features via serial interfaces(RS-422/485),encoder feedback,DIP-switch settings etc.These allow fine tuning in situ,trouble-shooting,and operational adjustments without dismantling machine.

Innovation Point 5:Robust electrical protection and reliable design.With protections like overcurrent,temperature,possibly short-circuit or overload,DBTS10-200-7 is suited for harsh industrial environments.

Application Cases and Industry Value

Case 1:Machine Tool Application—A CNC cutting machine replaced an older drive with Baldor DBTS10-200-7 to control its spindle motor.The result:better surface finish(reduced vibration),faster acceleration/deceleration,smoother tool changes,and fewer maintenance calls for drive overheating.

Case 2:Packaging/Conveyor Systems—A high-speed conveyor using brushless AC motors used the DBTS10-200-7 to regulate motion at tight tolerances.During starts and stops with heavy loads,previous controllers stalled or overshot.With this drive installed,the system runs smoother,reduces mechanical stress on belts/chains,and lowers downtime.

The general value:it boosts automation precision,reduces energy waste via better control/regeneration,and extends equipment life by protecting the motor&drive from electrical stress.

Related Product Combination Solutions

Here are modules and parts that pair well with Baldor DBTS10-200-7 or can serve as alternatives/expansions:

Baldor DBTS10-200-5.0-24-RL-PAA–Lower current version,useful if load is lighter and cost/power saving is desired.

Baldor DBTS10-200-10-R-PAA–Mid-range in current;good for moderate speed/motion applications.

Baldor BPS10 series power supply–For providing the correct supply voltage for the drive’s auxiliary&control sections.

Baldor Encoder Kits/Tach Feedback Units–To provide feedback to the DBTS10-200-7 for closed-loop control.

Cooling/Heat Sink Accessories–Rack-mounting and high power drives generate heat;proper cooling improves reliability.

Emergency Brake or Encoder Redundancy Modules–For safety or higher reliability operations.

Installation,Maintenance,and Full-Cycle Support

Installation:Mount the DBTS10-200-7 in its rack(if RL variant);ensure proper ventilation and clearance.Connect motor leads,encoder/tach feedback,control power(24 V etc.),signal inputs as per wiring diagrams.Ensure correct grounding and shielding on feedback lines to prevent noise.Use qualified wiring and torque settings for power terminals.

Commissioning:Before full load,run through calibration steps—set the encoder counts,adjust current limits,test regeneration behavior,verify cooling.Monitor current draw,temperature,output waveforms.Ensure that control signals(digital/analog)respond correctly and safely.

Routine Maintenance:Periodic inspection of connectors,checking screws,cleaning cooling surfaces,verifying encoder feedback signal clarity.Look out for overheating,unusual noise,or failure to respond.Replace worn parts such as fans or blowers as needed.

Spare Part and Service Support:Since some variants are discontinued(“discontinued by manufacturer”flagged in resellers)

Radwell International

,ensure stock of spare units or refurbished ones.Work with trusted suppliers who test and certify.Warranty conditions should be clear(refurbished vs new).Full technical documentation(installation manual,errata,parameter tables)should be kept.