Product Description

Brand:​EMERSON

Model:​KJ4110X1-BA1

Series:​DeltaV S-series Electronic Marshalling(EMD)

Function:​16-Channel Analog Input Module with HART

Signal Type:​4-20mA with HART digital communication

EMERSON KJ4110X1-BA1​is a 16-channel analog input module​with integrated HART communication​capability,designed for the DeltaV S-series​distributed control system.This module provides high-density signal conditioning for 4-20mA inputs from field transmitters while simultaneously enabling digital HART communication for device configuration,calibration,and diagnostics.It serves as a critical interface for smart field devices in modern process automation systems.Genuine Emerson component,fully tested and certified.

Application Scenarios

In a large petroleum refinery’s crude distillation unit,hundreds of smart pressure,temperature,and level transmitters provide critical process measurements.Traditionally,accessing these devices for configuration or diagnostics required technicians to perform risky field visits,often in hazardous areas and during costly production shutdowns.The implementation of the EMERSON KJ4110X1-BA1​HART analog input modules transformed this paradigm.Installed in DeltaV EMD racks located in safe-area control rooms,these modules connect to the field transmitters via standard 4-20mA wiring.While continuously monitoring the analog process variable with high accuracy,the KJ4110X1-BA1​modules simultaneously superimpose HART digital signals on the same wires.This allows process engineers to remotely reconfigure transmitter ranges from their workstations,and maintenance teams to pull device status,diagnostic information,and calibration history without ever entering the field.When a level transmitter on a fractionation column began showing signs of diaphragm coating,the KJ4110X1-BA1​module enabled the system to continuously monitor the transmitter’s”digital signature”and alert maintenance before measurement accuracy was compromised,allowing for planned cleaning during a routine turnaround and preventing a potential column upset.

Key Parameters

Parameter

Value/Description

Product Model​

KJ4110X1-BA1​

Manufacturer​

EMERSON

Product Type​

16-Channel Analog Input Module with HART

Compatible System​

DeltaV S-series with Electronic Marshalling(EMD)

Number of Channels​

16

Input Signal​

4-20mA(HART enabled)

HART Protocol​

Supports HART 5/6/7

Input Impedance​

250 ohms(for HART communication)

Resolution​

16-bit(minimum)

Accuracy​

±0.05%of span(typical)

Update Rate​

Configurable per channel

Channel-to-Channel Isolation​

Yes

HART Communication Method​

Master/Slave with scheduling

Power Supply​

Via DeltaV EMD backplane

Operating Temperature​

0°C to 60°C

Installation​

DeltaV EMD CHARMS carrier

Certifications​

cULus,ATEX/IECEx(for associated apparatus)

Technical Principles and Innovative Values

The EMERSON KJ4110X1-BA1​represents the evolution of process I/O from simple signal conversion to intelligent device management,combining precision measurement with bidirectional digital communication.

Innovation Point 1:Integrated HART Multiplexing Technology

The module incorporates sophisticated HART multiplexing circuitry that allows it to function as a HART master​on each of its 16 channels.Unlike basic AI cards that only read the 4-20mA signal,the KJ4110X1-BA1​superimposes the HART FSK(Frequency Shift Keying)signal on the analog current loop and decodes the digital responses from field devices.This happens transparently without affecting the integrity of the analog measurement.The module manages communication timing to prevent collisions when multiple HART devices respond simultaneously.

Innovation Point 2:High-Density Channel Isolation and Signal Integrity

Despite packing 16 channels into a single module,the KJ4110X1-BA1​maintains individual channel-to-channel isolation.This prevents ground loops and ensures that a fault on one channel(such as a short circuit)doesn’t affect the others.The advanced signal conditioning circuitry provides excellent noise rejection and high common-mode voltage rejection,ensuring accurate readings even in electrically noisy industrial environments.The 16-bit ADC resolution provides precise measurement for demanding control applications.

Innovation Point 3:Native DeltaV Integration and Asset Management

The module is fully integrated into the DeltaV system through the EMD platform.HART device information is automatically available in DeltaV Operate​and DeltaV Manage​applications.This native integration enables advanced asset management features like online device status monitoring,automatic device configuration backup,and predictive maintenance alerts​based on device diagnostics.The module supports the entire HART device lifecycle within the DeltaV engineering environment.

Innovation Point 4:Flexible Configuration and Scalable Architecture

Each of the 16 channels can be individually configured for different signal types and HART parameters.The module supports burst mode​operation for frequently accessed HART variables,improving communication efficiency.In large systems,multiple KJ4110X1-BA1​modules can be deployed across different EMD racks,providing a scalable solution for plants with thousands of HART devices while maintaining a unified management interface.

Application Cases and Industry Value

Case Study:Chemical Plant Smart Device Migration and Optimization

A major chemical plant undergoing a control system modernization from an legacy DCS to Emerson’s DeltaV system faced the challenge of integrating over 800 existing smart pressure,temperature,and analytical transmitters.The legacy system could only read the 4-20mA signals,wasting the valuable diagnostic and configuration data available via HART.The engineering team standardized on the EMERSON KJ4110XA1-BA1​modules for all analog input points.

During commissioning,the KJ4110X1-BA1​modules automatically identified each connected HART device and uploaded their configuration directly into the DeltaV system database.This eliminated manual data entry errors and saved approximately 320 engineering hours.In operation,the modules enabled the plant to implement a predictive maintenance strategy.When a corrosive process stream began affecting the diaphragm of multiple pressure transmitters,the KJ4110X1-BA1​modules detected the increasing”deviation”parameter from the HART devices before the analog readings showed significant error.Maintenance was scheduled during a planned unit shutdown,avoiding unplanned downtime estimated at$50,000 per hour.The project demonstrated a 9-month ROI through reduced commissioning time,eliminated field calibration visits,and prevented a single major process upset.

Related Product Combination Solutions

The KJ4110X1-BA1​functions within a comprehensive DeltaV and field device ecosystem.Essential related components include:

EMERSON DeltaV S-series Controller:The processor that executes control logic using analog values from the KJ4110X1-BA1.

EMERSON THUM Adapter:For adding HART capability to existing non-HART devices in the field.

EMERSON AMS Device Manager:The comprehensive asset management software that leverages data from the KJ4110X1-BA1.

EMERSON Various HART Field Devices:Including Rosemount pressure transmitters,Micro Motion Coriolis flow meters,and Rosemount analytical instruments.

EMERSON KJ Series Digital Input/Output Modules:For complementary discrete signal handling in the same DeltaV EMD rack.

EMERSON Intrinsically Safe Barriers:For applications in hazardous areas where IS protection is required.

EMERSON CHARMS(Characterization Modules):The individual signal conditioning modules that work with the KJ4110X1-BA1​in the EMD system.

Installation,Maintenance,and Full-Cycle Support

Installation involves inserting the KJ4110X1-BA1​module into a designated slot in the DeltaV EMD CHARMS carrier.Field wiring from transmitters connects to the appropriate CHARMS modules,which then interface with the KJ4110X1-BA1​via the backplane.Proper shield termination and grounding are critical for optimal HART communication performance.Configuration is performed entirely within DeltaV Control Studio,where each channel is enabled for HART communication and associated with specific device types using Device Type Manager(DTM)files.

Routine maintenance primarily involves monitoring the health of HART communication through DeltaV diagnostics.The system can alert operators to communication errors or device malfunctions.The hot-swappable design of the EMD system allows for module replacement without system shutdown.For optimal performance,periodic verification of the analog measurement accuracy against a precision current source is recommended.

We guarantee that every EMERSON KJ4110X1-BA1​module is 100%genuine,sourced through authorized channels.Each unit undergoes comprehensive testing including analog accuracy verification and HART communication tests with various device types.We provide a 12-month warranty and technical support for integration and troubleshooting.

选择深圳长欣，选择放心，售后无忧 大量现货，当天顺丰发货！！！