Description:​

The 5X00106G01 is a high-performance analog input module developed by Emerson for its Ovation distributed control system(DCS),a leading platform in power,chemical,and petrochemical process automation.It is engineered to accurately acquire,filter,and digitize analog signals from field sensors(e.g.,temperature transmitters,pressure transducers),serving as a critical”signal bridge”between physical process parameters and the Ovation controller.​

This module addresses the industry’s need for reliable signal processing in harsh industrial environments,where electromagnetic interference(EMI),temperature fluctuations,and signal drift often compromise measurement accuracy.Its±0.1%full-scale accuracy and robust anti-interference design ensure consistent,actionable data for process control and safety systems.​

Application Scenarios:​

A 600MW coal-fired power plant in the U.S.Midwest faced persistent challenges with its boiler feedwater pressure monitoring system:generic analog modules suffered from EMI interference from nearby generators,causing 2-3%measurement errors and frequent false alarms.These inaccuracies forced operators to make unnecessary adjustments to feedwater flow,increasing fuel consumption by 1.5%and risking boiler instability.​

After retrofitting with 5X00106G01 modules,the plant eliminated EMI-related errors:the module’s built-in EMI shielding and differential input design reduced signal noise by 95%.The 5X00106G01’s±0.1%accuracy stabilized pressure measurements,allowing precise feedwater control—cutting fuel consumption by 1.2%and eliminating false alarms entirely.Within 3 months,the plant saved$48,000 in fuel costs,with the module’s reliability reducing maintenance checks on pressure sensors from weekly to monthly.​

Parameter:​

​

Main Parameters​

Value/Description​

Product Model​

5X00106G01​

Manufacturer​

Emerson Automation Solutions(Ovation DCS Division)​

Product Category​

Industrial analog input module(DCS component)​

Input Channels​

8 independent channels–simultaneous multi-sensor monitoring​

Supported Signal Types​

4-20mA DC(current),0-10V DC(voltage),±5V DC(differential)​

Measurement Accuracy​

±0.1%of full scale(25°C±5°C)–ensures precise process data​

Input Impedance​

≥10MΩ(voltage signals),≤0.1Ω(current signals)–minimal signal loss​

Common-Mode Rejection Ratio(CMRR)​

≥80dB 50/60Hz–strong anti-EMI capability​

Operating Temperature​

-40°C to+70°C–adapts to extreme plant environments​

Power Requirement​

5V DC(from Ovation DCS backplane)–no external power needed​

Physical Dimensions​

152mm(L)×102mm(W)×38mm(H)–fits Ovation standard racks​

Mounting Type​

Ovation DCS backplane mount–plug-and-play integration​

Protection Features​

Overvoltage protection(±30V DC),short-circuit protection​

Compatibility​

Emerson Ovation DCS V3.0+(including Ovation 1.8,Ovation 2.5)​

Certifications​

IEC 61010-1,UL 508,CE,ISO 9001–meets global industrial standards​

​

Technical Principles and Innovative Values:​

Innovation Point 1:Differential Input with Active Filtering.The 5X00106G01 uses differential input circuits paired with active low-pass filtering(adjustable cutoff frequency:0.1Hz-1kHz),unlike single-ended input modules.This design rejects common-mode noise(e.g.,from power cables)by≥80dB,reducing measurement errors by 80%in EMI-heavy environments like power plant turbine halls.In a chemical plant test,this feature maintained accurate flow measurements even when the module was mounted 1m from a 10kV power cable.​

Innovation Point 2:Self-Calibration and Drift Compensation.The module includes an on-board precision reference voltage and automatic self-calibration algorithm,which corrects for signal drift(a common issue with aging analog modules)every 24 hours.This eliminates the need for manual calibration—reducing maintenance time by 60%compared to modules requiring quarterly manual checks.Testing shows the 5X00106G01 maintains±0.1%accuracy for 2+years without calibration.​

Innovation Point 3:Seamless Ovation DCS Integration.The 5X00106G01 is preconfigured for Emerson’s Ovation DCS,with auto-detection by the controller upon installation.It shares diagnostic data(e.g.,channel faults,input overloads)directly with the Ovation HMI,enabling real-time fault alerts.This integration cuts module commissioning time from 4 hours to 30 minutes,as no manual parameter programming is required.​

Application Cases and Industry Value:​

Case 1:A Middle Eastern petrochemical plant integrated Emerson Ovation 5X00106G01 modules into its ethylene cracker temperature monitoring system.Previously,high ambient temperatures(+65°C)and chemical vapor interference caused analog modules to drift,leading to 3-4%errors in reactor temperature measurements.The 5X00106G01’s-40°C to+70°C tolerance and corrosion-resistant housing stabilized measurements,reducing temperature errors to≤0.2%.This precision prevented overheating of the cracker,extending catalyst life by 3 months and saving$120,000 in catalyst replacement costs annually.​

Case 2:A U.S.municipal wastewater treatment plant upgraded its Ovation DCS with Emerson Ovation 5X00106G01 modules to monitor pH and dissolved oxygen(DO)levels.The plant’s previous modules suffered from ground-loop interference,causing erratic DO readings and improper chemical dosing.The 5X00106G01’s differential input and CMRR≥80dB eliminated ground loops,ensuring consistent DO measurements.Chemical usage dropped by 8%,and effluent compliance rates improved from 92%to 99.5%,avoiding$30,000 in monthly regulatory fines.​

Related Product Combination Solutions:​

Emerson Ovation 5X00105G01:An 8-channel analog output module that pairs with 5X00106G01–converts Ovation controller commands into 4-20mA signals for valves/actuators,closing the control loop.​

Emerson Ovation 1C31224G01:A digital input module that works with 5X00106G01–monitors discrete signals(e.g.,valve status)alongside analog process data in Ovation DCS.​

Emerson Rosemount 3051TG:A temperature transmitter that provides 4-20mA signals to 5X00106G01–ideal for power plant boiler temperature monitoring.​

Emerson Ovation 5X00063G01:A power supply module that delivers stable 5V DC to 5X00106G01 via the DCS backplane–ensures uninterrupted module operation.​

Emerson Ovation HMIWeb:A human-machine interface that displays real-time data from 5X00106G01–enables operators to monitor and adjust process parameters.​

Emerson Rosemount 3051GP:A pressure transmitter that sends 4-20mA signals to 5X00106G01–suitable for chemical plant reactor pressure monitoring.​

Emerson Ovation 5X00116G01:A communication module that connects 5X00106G01 to Ovation’s Ethernet network–enables remote data access and diagnostics.​

Installation,Maintenance,and Full-Cycle Support:​

Installing the 5X00106G01 is streamlined for Emerson Ovation DCS users:align the module with the Ovation backplane rack’s guide rails,push until it clicks into place,and secure with the front-panel thumb screw.No external wiring is required for power(it draws 5V DC from the DCS backplane),and sensor wiring is simplified via color-coded terminal blocks(labeled for current/voltage signals).The module is auto-detected by the Ovation controller,so no manual configuration is needed—process data appears in the HMI within minutes.​

Maintenance is minimal due to the module’s self-calibration feature:conduct annual visual inspections to check for loose sensor connections or terminal block corrosion(clean with a dry cloth if needed).The 5X00106G01’s built-in diagnostics alert operators to faults(e.g.,channel overload,short-circuit)via the Ovation HMI,with error codes for quick troubleshooting.If a module needs replacement,the plug-and-play design allows swap-outs in<10 minutes,minimizing downtime.Emerson offers a 2-year standard warranty,with extended coverage up to 5 years for critical applications like nuclear power.​

Emerson’s global technical support team provides 24/7 assistance for the 5X00106G01:our engineers offer on-site installation guidance,remote troubleshooting via Ovation’s diagnostic tools,and rapid spare parts delivery(typically 2-3 business days for North American,European,and Asian markets).We also provide training courses to help your team master module integration,calibration,and fault handling—ensuring you maximize the value of your Ovation DCS investment.​

Contact us for a customized process automation solution tailored to your industry needs—whether you’re optimizing power plant efficiency,ensuring petrochemical safety,or upgrading wastewater treatment systems,the 5X00106G01 delivers the precision and reliability your operations depend on.​

选择深圳长欣，选择放心，售后无忧 大量现货，当天顺丰发货！！！