
Description
TheMECS UTX1010is a versatile,DIN-rail mounted universal temperature transmitter designed to convert signals from various temperature sensors into a standardized 4-20mA output.It accepts inputs from thermocouples(Types J,K,T,E,etc.),RTDs(PT100,PT1000),and voltage/current signals,providing a robust,isolated,and linearized signal suitable for PLC,DCS,and other control system inputs.
Application Scenarios
In a food processing plant,stainless steel tanks require precise temperature control for pasteurization.The temperature is measured by PT100 RTD sensors submerged in the product.However,the weak resistance signal from the RTD is susceptible to electrical noise over long cable runs to the central control room.TheMECS UTX1010transmitter is installed in a local junction box near the tank.It converts the precise RTD resistance into a robust 4-20mA current signal that is highly immune to noise.This clean,reliable signal is then sent to the PLC,which accurately controls the heating and cooling valves,ensuring product quality and safety.
Parameter
Specification
Product Model
UTX1010
Manufacturer
MECS(Mitsubishi Electric Control Systems or similar)
Product Type
Universal Temperature/Signal Transmitter
Input Signals
Thermocouples(J,K,T,E,R,S,B,N),RTDs(PT100,PT1000),Voltage(mV,V),Current(mA)
Output Signal
2-Wire,4-20mA DC(Linear to the input)
Power Supply
12-30 VDC(Loop Powered)
Isolation
Input/Output/Power Supply Isolation(e.g.,1500V AC)
Accuracy
High Accuracy(e.g.,±0.1%of span or±0.1°C for RTD)
Linearity
Digital Linearization for Thermocouples and RTDs
Commissioning
Configurable via DIP switches,push-buttons,or PC software
Mounting
Standard 35mm DIN-Rail
Operating Temp.
-20°C to+80°C(-4°F to+176°F)
Technical Principles and Innovative Values
TheMECS UTX1010acts as a signal conditioner and interpreter,bridging the gap between sensitive sensors and robust control systems.
Innovation Point 1:Universal Input Flexibility.A key advantage is its ability to accept a wide range of sensor types with a single hardware model.This reduces spare part inventory,as a plant can stock onlyUTX1010units to service transmitters for thermocouples,RTDs,and voltage inputs,simplifying maintenance and procurement.
Innovation Point 2:High Accuracy with Digital Linearization.The transmitter uses a microprocessor to digitally linearize the non-linear voltage curves of thermocouples and the resistance curve of RTDs.This provides much higher accuracy over the entire temperature range compared to older analog linearization methods,ensuring precise measurement for critical processes.
Innovation Point 3:Robust Isolation and Noise Immunity.TheUTX1010provides galvanic isolation between the input,output,and power supply.This prevents ground loops and protects the control system from high-voltage transients and noise that can be picked up in industrial environments,ensuring signal integrity and system reliability.
Application Cases and Industry Value
Case Study:Improving Accuracy in a Plastic Injection Molding Machine.An injection molding machine was producing inconsistent parts due to fluctuating temperature readings from its J-type thermocouple.The existing transmitter had poor cold-junction compensation and was affected by electrical noise from the machine’s hydraulic pumps.Replacing it with aMECS UTX1010transmitter,configured specifically for the J-type thermocouple,resolved the issue.TheUTX1010’s accurate cold-junction compensation and high noise immunity provided a stable and precise temperature signal to the machine controller.This resulted in more consistent mold temperatures,higher part quality,and a significant reduction in scrap material.
Related Product Combination Solutions
TheMECS UTX1010is a key component in a sensor-to-control system signal chain.
Temperature Sensors:Thermocouples or RTD probes that connect to theUTX1010input.
DIN-Rail Enclosure:The electrical cabinet where the transmitter is mounted alongside other components.
PLC/DCS Analog Input Module:The module in the control system that receives the 4-20mA signal from theUTX1010.
Loop Power Supply:A 24VDC power supply used to power the 2-wire transmitter loop if not supplied by the analog input card itself.
Configuration Tool/Software:A handheld configurator or PC software for easy setup of the transmitter parameters.
Installation,Maintenance,and Full-Cycle Support
Installation and Maintenance:Installing theMECS UTX1010is straightforward.It snaps onto a standard DIN rail.Wiring involves connecting the sensor to the input terminals and the 4-20mA loop wires to the output terminals,observing correct polarity.Configuration is typically done via intuitive DIP switches or a simple calibration procedure.
Maintenance is minimal but includes periodic verification of the output signal against a known temperature standard to ensure continued accuracy.The compact design allows for easy replacement if necessary.
Our support for theMECS UTX1010covers its entire lifecycle.We provide genuine,high-quality transmitters to ensure measurement accuracy and system reliability.Our technical team can assist with selection and configuration guidance.
选择深圳长欣,选择放心,售后无忧 大量现货,当天顺丰发货!!!