DANAHER MOTION FT242M-1010-18 Product Introduction

Product Overview:

FT242M-1010-18 is a high-performance stepper motor developed by Danaher Motion, specifically designed for high-precision positioning and dynamic control scenarios. This product adopts a dual bearing structure and optimized magnetic circuit design, combined with a low inertia rotor, suitable for driving requirements of automated assembly, 3D printing equipment, and precision instruments, such as joint control of robotic arms, laser cutting positioning systems, and motion modules of medical equipment.

Main features and advantages:

High torque output: The peak torque reaches XX N · m, coupled with a low torque fluctuation design to ensure smooth operation of the load.

Quick response capability: The maximum no-load speed is XX rpm, and the acceleration reaches XX rad/s ², meeting the requirements of high-speed motion and frequent start stop.

Low heat generation and high efficiency: Using rare earth permanent magnet materials and optimized winding design, the efficiency is ≥ XX%, reducing heat loss.

Compatibility design: Supports 24V DC power supply, compatible with mainstream drivers such as AKM11E series, simplifies system integration.

Long life structure: The bearings use high-temperature resistant lubricating grease, with an MTBF (mean time between failures) of XX million hours.

Technical specifications

Parameter indicators

Model FT242M-1010-18

Rated voltage 24V DC

Phase number 2 (step angle 1.8 °)

Step angle 1.8 °

Maximum static torque XX N · m

Idle speed XX rpm

Working temperature -20 ° C to+80 ° C

Installation interface NEMA 23 standard interface

Application areas:

This product is suitable for the following scenarios:

Automated assembly line: precise positioning and repetitive motion control of robotic arm joints

Precision instrument: micrometer level translation drive for microscope stage

3D printing equipment: high dynamic scanning and lamination control of print heads

Medical equipment: low vibration drive module for surgical robot joints

Related products:

FT242M-1010-24: Higher voltage models in the same series, suitable for wide voltage scenarios

AKM11E-ANMNR-00: Equipped with servo drive to achieve closed-loop feedback control

SS2000PCI Multi Axis Controller: Supports synchronous motion planning and coordination of multiple motors

NT17-XXX series harmonic reducer: suitable for low-speed high torque transmission requirements

DANAHER MOTION FT242M-1010-18产品简介

产品概述：

FT242M-1010-18是Danaher Motion开发的高性能步进电机，专为高精度定位与动态控制场景设计。该产品采用双轴承结构与优化的磁路设计，结合低惯性转子，适用于自动化装配、3D打印设备及精密仪器的驱动需求，如机械臂关节控制、激光切割定位系统及医疗设备的运动模组。

主要特点和优势：

高扭矩输出：峰值扭矩达XX N·m，配合低转矩波动设计，确保负载平稳运行。

快速响应能力：最高空载转速XX rpm，加速度达XX rad/s²，满足高速运动与频繁启停需求。

低发热与高效能：采用稀土永磁材料与优化绕组设计，效率≥XX%，减少热损耗。

兼容性设计：支持24V直流供电，适配主流驱动器如AKM11E系列，简化系统集成。

长寿命结构：轴承采用耐高温润滑脂，MTBF（平均无故障时间）达XX万小时。

技术规格（表格形式）：

参数项指标

型号FT242M-1010-18

额定电压24V DC

相数2相（步进角1.8°）

步距角1.8°

最大静扭矩XX N·m

空载转速XX rpm

工作温度-20°C至+80°C

安装接口NEMA 23标准接口

应用领域：

该产品适用于以下场景：

自动化装配线：机械臂关节的精准定位与重复运动控制

精密仪器：显微镜载物台的微米级平移驱动

3D打印设备：打印头的高动态扫描与层压控制

医疗设备：手术机器人关节的低振动驱动模块

相关产品：

FT242M-1010-24：同系列更高电压型号，适配宽电压场景

AKM11E-ANMNR-00：配套伺服驱动器，实现闭环反馈控制

SS2000PCI多轴控制器：支持多电机同步运动规划与协调

NT17-XXX系列谐波减速机：适配低速高扭矩传动需求
Choose Shenzhen Changxin for worry-free after-sales service and high-quality products. We only cooperate with first-tier brand manufacturers in the industry. Our products are imported and comprehensive. We provide thoughtful pre-sales service, communicating multiple times with customers about product models, quality, prices, and delivery schedules to jointly confirm the solutions and address users’ concerns in advance. Business execution is in place, ensuring on-time delivery of ordered products and formulating a comprehensive delivery plan to guarantee the project schedule. We also assist users in handling acceptance procedures.

Our after-sales service is impeccable. For any problems during the warranty period, we only replace, not repair. We never shirk responsibilities or pass the buck when encountering problems. Our service hotline is available 24/7: 18150087953

SOLEMN COMMITMENT

1. For all items, modules, and cards sold by our company, if any quality problems occur during normal use within the warranty period, we will provide free replacements without any excuse or delay.
2. For non-discontinued materials and equipment that are out of the warranty period, we only charge the cost of relevant accessories for quality problems.
3. For discontinued materials and equipment, we provide alternative models and equipment replacement process services.
4. For the materials and equipment purchased by customers, we offer lifetime free system software upgrades and provide relevant technical documents for free.
5. We regularly follow up on the usage of the materials purchased by customers and promptly solve any problems.
6. Our company’s hotline provides 24-hour service, and we will respond to customers’ questions within 1 hour.
7. For any other matters not covered, our company adheres to the attitude of “thoughtful service and full responsibility” and solves problems from the customer’s perspective in a practical way. With a serious and rigorous corporate style, we wholeheartedly serve every customer.

The company mainly imports PLC modules, programmable controllers, servo control systems and DCS spare parts, such as: ABB, AB (Rockwell), GE (General Electric), Bentley, Honeywell, Emerson, Motorola, Invensys, Westinghouse, etc. The company has established close cooperative relations with many world-renowned PLC and DCS product maintenance service providers, and can directly purchase from abroad, providing equipment and spare parts from different countries and manufacturers.

We supply directly from abroad, without middlemen, reducing the cost of use.

There is really no middleman who can make a price difference! !

If you have any defects or need to import PLC, DCS spare parts, please contact our team, we will help you find reliable and high-quality products super quickly, while shortening the delivery time to ensure that your equipment can operate normally in the right environment. On time.

Professionally provide: PLC programmable control system, distributed control system (DCS), safety instrument system (SIS), ESD system, vibration monitoring system, turbine compressor control system (CCS) and other PLC modules, various industrial control systems, system modules, CPU, IO module, DO module, AI module, DI module, network communication module, Ethernet module, motion controller, analog input module, analog output module, switch input module, switch output module, module redundancy, power supply module, relay output unit, relay input unit, processing unit.

Products are widely used in: electricity, petroleum, mine hoisting, ports, heating, gas, water supply, sewage treatment, metallurgy, papermaking, textile, chemical industry, water conservancy and other modern industrial fields!

ABB 5SHY3545L0010/3BHB013088R0001

MOTOROLA MVME2434

MOTOROLA MVME2432

A-B 81001-450-53-R

ABB PNI800

WOODWARD 9907-164

NI PXIE-4145

ABB CI871K01 3BSE056797R1

MOTOROLA MVME5500-0161

MOTOROLA MVME5500-0163

EMERSON MVME55006E-0163

GE DS200DCFBG1BJB

ABB PPD113B01-10-150000

ABB PM904F 3BDH001002R0001

MOTOROLA MVME2400

FOXBORO H92A0K9V0H00

PIONEER MAGNETICS PM36218B-10P-1-8PH-J

GE IC698CPE040-JP

EMERSON MVME7100

ABB HPC800K02

ABB SYN5202-0277

ABB HPC800K02（含HC800模块、CP800模块、底座）

MOTOROLA MVME5500

MOTOROLA MVME55006E-0163R

GE IS215UCVEM09B

AMAT 0090-76110 VME PCB

ABB 5SHX2645L0002/3HB012961R0001

ABB AO2000-LS25

ABB PM865K01 3BSE031151R1

ABB 5SHX1445H0001 3BHL000391P0101 3BHB003230R0101 5SXE05-0152

KONGSBERG DPS112

GE VMIVME-7750

ABB AO2000-LS25

TRICON 4352B

ABB PFSK152

TRICONEX 3009

MOOG D136-001-007

SCANde INTELLISCANDE14-405NM SCANLAB