Allen-Bradley 1746-OV8 Current Sinking DC Output Module缩略图

Allen-Bradley 1746-OV8 Current Sinking DC Output Module

Allen-Bradley 1746-OV8 Current Sinking DC Output Module插图

 

Description

The 1746-OV8​ is an Allen-Bradley 8-channel DC output module for the SLC 500 programmable controller system. Manufactured by Rockwell Automation, it converts discrete output data from the SLC 500 processor into switched 24V DC control signals.The 1746-OV8​ is a current-sinking output module, which means each channel switches the load-return or negative side of the output circuit. It is commonly used to operate solenoid valves, motor-starter coils, relays, indicators and other 24V DC field devices in compatible SLC 500 control panels.

Application Scenarios

A metal-stamping plant used an SLC 500 controller to operate clamping solenoids, lubricant pumps and safety-interlock relays. The control logic was still stable, but one output module produced erratic results after years of vibration and cabinet heat exposure. Replacing the entire control platform would have required requalification of the safety logic and a prolonged production stoppage.The maintenance team installed a tested Allen-Bradley 1746-OV8​ in an available chassis slot. They verified the sinking-output wiring, checked load current, reassigned the output image addresses and performed a point-by-point functional test. Each channel was then observed through the SLC 500 program and at the module terminals.The replacement restored reliable control without rewriting the application or replacing compatible field devices. For plants that still depend on proven SLC 500 logic, the 1746-OV8​ can be the difference between a short, predictable repair and a costly platform-wide migration.

Parameter

Main Parameters Value / Description
Product Model 1746-OV8​
Manufacturer Allen-Bradley, a Rockwell Automation brand
Product Category Discrete DC output module
Control Platform SLC 500
Number of Channels 8 current-sinking DC outputs
Output Type Current sinking / NPN-style negative-side switching
Output Voltage 10–50V DC
Nominal Load Voltage 24V DC
Maximum Continuous Current per Channel 2A at 30°C; 1A at 60°C
Maximum Continuous Current per Module 16A at 30°C; 8A at 60°C
Surge Current 6A per channel for 10ms
On-State Voltage Drop 0.8V DC maximum at 2A
Off-State Leakage Current 1.0mA maximum
Minimum Load Current 5mA per channel
Signal Delay Off-to-on: 0.1ms maximum; on-to-off: 1.0ms maximum with a resistive load
Backplane Current Draw 280mA at 5V DC; 0mA at 24V DC
Isolation 1500V AC between outputs and backplane for 1 second
Communication Circuit Isolation 500V DC
Status Indicators 8 output status LEDs, one per channel
Terminal Block Removable terminal block for simplified wiring and replacement
Mounting Method Single-slot module in a compatible 1746 chassis
Slot Position Any available I/O slot; the processor slot is not used for ordinary I/O
Chassis Compatibility 1746-A4, 1746-A7, 1746-A10 and 1746-A13 chassis, subject to system capacity
Programming Software RSLogix 500
Dimensions 144.5 × 34.6 × 130.2mm
Weight 0.27kg
Operating Temperature 0°C to +60°C
Storage Temperature −40°C to +85°C
Relative Humidity 5% to 95%, non-condensing
Certifications UL, CSA and CE; confirm exact approvals on the supplied unit
Lifecycle Status Discontinued; Rockwell Automation standard support ended on 30 September 2024
Replacement Category Engineering replacement