Product Overview
The code ABB ICSF08D1 FPR3323101R1012 identifies a specific component within ABB’s industrial control and automation product range. Based on the structure, this appears to be a model and article number for a modular terminal block or connection accessory, likely from ABB’s FPR or similar series of rail-mounted terminal blocks. The 24VDC specification indicates it is rated for use with 24 Volt Direct Current control circuits, which is the standard for most modern PLCs (Programmable Logic Controllers), sensors, and actuators in industrial panels.
Key Specifications & Details
Based on typical product nomenclature and the ICSF08D1and FPRprefixes, here is a breakdown of its likely characteristics:
Typical Application Scenario
In an automated packaging machine’s control panel, an engineer is wiring a 24VDC solenoid valve that controls a pneumatic cylinder. The wire from the PLC’s digital output card and the wire from the 24VDC power supply need to be connected to the solenoid.
Instead of wiring directly to the solenoid or using wire nuts, the engineer uses an ABB ICSF08D1 FPR3323101R1012 terminal block base mounted on the DIN rail. The two wires are securely fastened into the screw terminals of this base. Then, a plug-in relay (like an ABB CR-M miniature relay) is snapped into the base. The PLC output now controls the relay coil, and the relay’s contacts switch the 24VDC power to the solenoid.
This setup provides several benefits:
Safety & Isolation: The low-voltage PLC circuit is electrically isolated from the power circuit driving the solenoid.
Maintenance: If the relay fails, it can be replaced in seconds by unplugging it, without touching any wiring.
Organization: Modular terminals create a clean, logical, and easily traceable panel layout.
Why This Information is Crucial & Next Steps
The precise description above is based on inference from standard ABB product coding. For critical procurement or integration, this information must be verified. Here’s why and how:
Verification is Key: Industrial part numbers like FPR3323101R1012are highly specific. A single digit difference can change a rating, dimension, or connection type.
How to Get Exact Data:
Cross-Reference: Use the complete code ICSF08D1 FPR3323101R1012in ABB’s official Online Catalog or Partfinder tool.
Check Documentation: If this part is from an existing machine, find the Electrical Bill of Materials (BOM) or panel layout diagram. The associated schematic will show its exact function.
Contact Supplier: Provide the full code to an authorized ABB distributor or ABB technical support. They can pull the exact datasheet (DT) or instruction manual (IM).
In summary, the ABB ICSF08D1 FPR3323101R1012 24VDC is almost certainly a DIN-rail mounted, 24V-rated modular terminal block base used for building safe, organized, and maintainable electrical connections in industrial control panels. Its main value lies in creating a modular interface for plug-in components like relays.
