
Product Overview
The ABB Bailey INICT13A is an INFI-NET to Computer Transfer Module, commonly referred to as an ICI or ICT module, within the ABB Bailey INFI 90 distributed control system architecture. Originally developed by Bailey Controls and later integrated into the ABB Symphony and Harmony product families, the ABB Bailey INICT13A provides the dedicated communication bridge between the INFI-NET control backbone and external supervisory computers.Unlike controllers or I/O modules, the ABB Bailey INICT13A is not responsible for executing control logic. Its role is to transfer process data, alarms, sequence-of-events records and configuration information between the control network and the computer layer. On the control side, it communicates with an INNIS21 network interface slave module across the local I/O expander bus. On the computer side, it provides a high-speed 50-pin SCSI interface and an RS-232-C serial path through the compatible NTPM01 termination unit. This dual-path design allows the module to support operator stations, engineering workstations, real-time data historians and plant information management systems.The ABB Bailey INICT13A uses onboard buffered memory to maintain an autonomous interface with the INFI-NET side while the host computer polls a memory-mapped register map. It supports up to approximately 30,000 point definitions and includes CRC error checking, retry handling and self-diagnostics. For plants operating legacy INFI 90 or Network 90 systems, the ABB Bailey INICT13A remains essential for maintaining operator visibility, alarm handling and historical data collection without re-engineering the existing control layer.
Technical Specifications
| Parameter Name | Parameter Value |
|---|---|
| Product Model | INICT13A (also referenced as ICT13A) |
| Manufacturer | ABB, originally Bailey Controls / Elsag Bailey |
| Product Type | INFI-NET to Computer Transfer Module (ICI / ICT) |
| System Compatibility | INFI 90, Network 90, Symphony, Harmony, INFI 90 OPEN |
| Control Network Interface | INFI-NET via paired INNIS21 module |
| Network Protocol | Cnet / INFI-NET token-passing protocol |
| Control Network Data Rate | 1 Mbps class (legacy generation) |
| Network Topology | Dual-redundant coaxial ring supported through INNIS21 |
| Host Interface | 50-pin SCSI and RS-232-C |
| SCSI Throughput | Up to 4 Mbyte/s in bus-master mode |
| RS-232-C Configuration | DTE or DCE selectable through NTPM01 termination unit |
| RS-232-C Data Rate | 50 to 19,200 baud, 19.2 kbps practical maximum |
| Onboard Memory | 512 KB ROM, 2 MB RAM |
| Point Definition Capacity | Up to 30,000 point definitions |
| Data Transfer Mechanism | Buffered dual-port RAM, polled register map |
| Associated Network Module | INNIS21 |
| Compatible Termination Unit | NTPM01 |
| Compatible Cables | NKTU01, NKTU11 |
| Backplane Power Supply | +5 VDC |
| Typical Current | 1.1 A |
| Maximum Current | 1.4 A |
| Typical Power Consumption | 5.1 W |
| Maximum Power Consumption | 7 W |
| Error Control | CRC-16 frame checking and module-level retry |
| Diagnostic Indicators | Front-panel red/green status LED, 16 CPU LEDs, SCSI activity LED |
| Mounting | One slot in standard Bailey MMU or module carrier |
| Operating Temperature | 0°C to +70°C |
| Relative Humidity | 20% to 95% RH up to 55°C, non-condensing |
| Form Factor | Single-width INFI 90 module |
| Dimensions | 360.7 × 73.7 × 269.2 mm |
| Weight | 0.658 kg |
| Product Status | Discontinued; successor designation SPICT13A |
| Certifications | CE, UL |