ABB Bailey INICT13A ICI Module with SCSI and RS-232-C Host Interfaces – Direct Replacement Spare缩略图

ABB Bailey INICT13A ICI Module with SCSI and RS-232-C Host Interfaces – Direct Replacement Spare

ABB Bailey INICT13A ICI Module with SCSI and RS-232-C Host Interfaces – Direct Replacement Spare插图

 

Product Overview

The ABB Bailey INICT13A​ is an INFI-NET to Computer Transfer Module, commonly referred to as an ICI or ICT module, within the ABB Bailey INFI 90 distributed control system architecture. Originally developed by Bailey Controls and later integrated into the ABB Symphony and Harmony product families, the ABB Bailey INICT13A​ provides the dedicated communication bridge between the INFI-NET control backbone and external supervisory computers.Unlike controllers or I/O modules, the ABB Bailey INICT13A​ is not responsible for executing control logic. Its role is to transfer process data, alarms, sequence-of-events records and configuration information between the control network and the computer layer. On the control side, it communicates with an INNIS21 network interface slave module across the local I/O expander bus. On the computer side, it provides a high-speed 50-pin SCSI interface and an RS-232-C serial path through the compatible NTPM01 termination unit. This dual-path design allows the module to support operator stations, engineering workstations, real-time data historians and plant information management systems.The ABB Bailey INICT13A​ uses onboard buffered memory to maintain an autonomous interface with the INFI-NET side while the host computer polls a memory-mapped register map. It supports up to approximately 30,000 point definitions and includes CRC error checking, retry handling and self-diagnostics. For plants operating legacy INFI 90 or Network 90 systems, the ABB Bailey INICT13A​ remains essential for maintaining operator visibility, alarm handling and historical data collection without re-engineering the existing control layer.

Technical Specifications

Parameter Name Parameter Value
Product Model INICT13A (also referenced as ICT13A)
Manufacturer ABB, originally Bailey Controls / Elsag Bailey
Product Type INFI-NET to Computer Transfer Module (ICI / ICT)
System Compatibility INFI 90, Network 90, Symphony, Harmony, INFI 90 OPEN
Control Network Interface INFI-NET via paired INNIS21 module
Network Protocol Cnet / INFI-NET token-passing protocol
Control Network Data Rate 1 Mbps class (legacy generation)
Network Topology Dual-redundant coaxial ring supported through INNIS21
Host Interface 50-pin SCSI and RS-232-C
SCSI Throughput Up to 4 Mbyte/s in bus-master mode
RS-232-C Configuration DTE or DCE selectable through NTPM01 termination unit
RS-232-C Data Rate 50 to 19,200 baud, 19.2 kbps practical maximum
Onboard Memory 512 KB ROM, 2 MB RAM
Point Definition Capacity Up to 30,000 point definitions
Data Transfer Mechanism Buffered dual-port RAM, polled register map
Associated Network Module INNIS21
Compatible Termination Unit NTPM01
Compatible Cables NKTU01, NKTU11
Backplane Power Supply +5 VDC
Typical Current 1.1 A
Maximum Current 1.4 A
Typical Power Consumption 5.1 W
Maximum Power Consumption 7 W
Error Control CRC-16 frame checking and module-level retry
Diagnostic Indicators Front-panel red/green status LED, 16 CPU LEDs, SCSI activity LED
Mounting One slot in standard Bailey MMU or module carrier
Operating Temperature 0°C to +70°C
Relative Humidity 20% to 95% RH up to 55°C, non-condensing
Form Factor Single-width INFI 90 module
Dimensions 360.7 × 73.7 × 269.2 mm
Weight 0.658 kg
Product Status Discontinued; successor designation SPICT13A
Certifications CE, UL