Product Overview

The Siemens 6AV6645-7AB10-0AS0​ is an OEM SIMATIC Mobile Panel 277 Remote Operate (RO), the 10-inch cabled mobile HMI in Siemens’ MP 277 family that is purpose-built for walk-around machine operation where the operator must leave the fixed control desk but retain an enabling button, emergency-stop, and a live view of the machine’s HMI screens. While standard MP 277 units (wired DP/PN or IWLAN) run a local WinCC Flexible / TIA Portal project and act as a standalone HMI, the Siemens 6AV6645-7AB10-0AS0​ belongs to the RO sub-line: the panel itself carries the “Remote Operate Client” pre-installed in firmware, while the actual HMI runtime lives on a SIMATIC IPC or PG running “Remote Operate Server” (V3.1 supplied as CD in the accessory pack with this SKU). Over a cabled link through a terminal box (PROFIBUS DP or PROFINET, depending on the cable/order combination — the -0AS0 is the OEM bare panel, so the cable/terminal box is ordered separately), the RO Client mirrors the server-side WinCC Runtime screens to the 10-inch panel, and the operator’s touch inputs, acknowledgement button, and E-stop are tunneled back to the server. This architecture is Siemens’ answer to large-footprint machines — stamping presses, roller presses, heavy winding/unwinding lines, crane/stacker systems, large test rigs — where the fixed IPC HMI sits in a cabinet but the operator needs to walk the perimeter with safety authority (enable + E-stop) and live screen visibility.The Siemens 6AV6645-7AB10-0AS0​ carries a 10-inch-class TFT touchscreen (the MP 277 10″ generation is 10.4″ 800 × 600, 64 K colors), IP65 front bezel, integrated acknowledgement (enabling) button and emergency-stop button, and ships with two stylus pens for precise touch operation in gloved or oily environments. Power is 24 V DC fed through the terminal-box cabling; unlike the IWLAN siblings (6AV6645-0EB01 / -0DE01 / -0DD01), the RO cabled version has no internal battery, no charger, no wireless — it is tethered, simpler, and lighter as a result (4.26 kg vs. ~5+ kg for the IWLAN SKUs). The “OEM” in the Siemens 6AV6645-7AB10-0AS0​ designation means the panel ships without the terminal box, cable, or docking — those are specified per the plant’s DP vs. PN choice and cable length, letting machine builders and spares buyers tailor the BOM. The product is listed End Product Lifecycle on Siemens Industry Mall with no direct successor under the same RO-client architecture, which makes the Siemens 6AV6645-7AB10-0AS0​ a strategic spare for plants that standardized on RO for large-press perimeter operation and cannot justify re-engineering to IWLAN or to a Comfort Panel + wireless IPC setup.

Technical Specifications