Description

The Siemens 6AV6648-0CE11-3AX0​ is a SIMATIC HMI SMART 1000 IE V3, the 10.1-inch member of Siemens’ Smart Line V3 family—a value-tier touch panel purpose-built for S7-200 SMART, LOGO!, and third-party PLC ecosystems rather than the S7-300/400/1200/1500 world of Comfort and Unified panels. It pairs a 10.1″ widescreen TFT (1024 × 600, 65536 colors) with an ARM 600 MHz core, 128 MB RAM, 8 MB user flash, isolated RS422/485, one RJ45 Ethernet, and a USB 2.0 host port, all behind an IP65 front bezel. Configured exclusively through WinCC flexible SMART V3 (not TIA Portal), the SMART 1000 IE V3 became the default 10″ HMI for cost-sensitive OEM machines—textile, packaging, bottling, water treatment skids, and Asian-market machine tools—where a full Comfort Panel budget couldn’t be justified but a 7″ screen felt cramped for P&ID + alarm buffer.h2 Application ScenariosA circular knitting machine builder in Zhejiang ships 40 machines a month to Bangladesh and Vietnam, each spec’d with an S7-200 SMART CPU (6ES7288-1SR40-0AA0) and a Siemens 6AV6648-0CE11-3AX0​ as the operator face. The 10.1″ widescreen renders the needle-selection pattern grid (128 × 96 pixels per course), the yarn-break alarm buffer, and the production counter simultaneously—something the 7″ Smart 700 IE V3 couldn’t fit without tabbing, which the floor operators hated at shift change. The Ethernet port talks natively to the S7-200 SMART over S7 protocol—no CP communication card, no extra DIN-rail node, just an RJ45 landed on the same unmanaged switch that also carries the servo drive diagnostics. The RS485 port runs Modbus RTU to a third-party Chinese tension controller that refuses PROFINET. When Siemens announced the Smart Line V3 into “product discontinued” status, the builder didn’t panic—they allocated 20 6AV6648-0CE11-3AX0​ spares, cloned the WinCC flexible SMART project onto USB sticks for field swaps, and kept the BOM alive. Three years later, the same panel still ships because the S7-200 SMART itself is still the volume CPU in that price bracket, and there’s simply no cheaper 10″ path that talks S7-native Ethernet.h2

Parameter

h2 Technical Principles and Innovative Values

• Innovation Point 1: S7-200 SMART Native Ethernet Without a CP Card.​ The 6AV6648-0CE11-3AX0​ speaks S7 protocol over its RJ45 port straight to an S7-200 SMART CPU—up to 4 PLCs on one HMI session. For OEMs, this kills the old S7-200 + OP/HMI architecture that needed a CP243-1 or MPI cable; one CAT5e run does PLC + HMI + remote I/O heartbeat. The Ethernet port also carries Modbus TCP and EtherNet/IP, so the same panel can sit on a Rockwell CompactLogix or Schneider M340 skid if the OEM exports.
• Innovation Point 2: Capacitor-Backed RTC, No Battery Swap.​ Unlike Comfort Panels that ship with a coin-cell CR1220 behind the bezel (which dies ~5–7 years and needs a bezel pull), the 6AV6648-0CE11-3AX0​ uses a super-capacitor RTC system. It holds time through a 24-hour power loss, recharges when live, and is genuinely maintenance-free for the panel’s lifetime. For machines shipped to remote sites (agricultural pumps, village water skids), this is the difference between “set and forget” and a service call.
• Innovation Point 3: Dual-Orientation + 35° Tilt Envelope.​ The Smart V3 mechanicals allow both portrait and landscape cutouts, with up to 35° tilt without external ventilation. The 6AV6648-0CE11-3AX0​ can therefore sit on a sloped operator pendant (common in textile and injection molding) or a vertical door without the ARM core throttling. Most 10″ panels in this price bracket lock you to landscape only.