ABB CM30/2 1/4 DIN Universal PID Process Controller – Advanced Dual-Loop, Cascade, Feedforward & Ratio Control缩略图

ABB CM30/2 1/4 DIN Universal PID Process Controller – Advanced Dual-Loop, Cascade, Feedforward & Ratio Control

ABB CM30/2 1/4 DIN Universal PID Process Controller – Advanced Dual-Loop, Cascade, Feedforward & Ratio Control插图

 

Description

The CM30/2​ is an ABB ControlMaster universal PID process controller in the 1/4 DIN panel-mount format—a standalone, single- or dual-loop controller for temperature, flow, level, and pressure. It is not a DIN-rail PLC module and it does not live in a rack: the entire controller sits behind a 92 × 92 mm panel cutout with its color display facing the operator.The “/2” in the model designates the Advanced functionality level, which unlocks the controller’s full software capability—dual-loop operation, cascade, feedforward, ratio, predictive and adaptive strategies, eight math blocks, eight logic equations, and two totalizers. Hardware, display, and panel cutout are shared with every other CM30 variant, so an installed CM30/2​ can move between control duties through a functionality key or configuration change without disturbing a single wire in the cabinet.

Application Scenarios

A dairy plant’s pasteurizer had been running on two independent temperature controllers and a manual adjustment on the product pump. The product probe was on one controller, the hot-water setpoint on the other, and the line operator changed pump speed by watching the temperature trend and turning a handwheel. When line speed rose with a new filler upstream, the temperature loop lagged far enough behind that product at the discharge occasionally sat below the hold temperature for several seconds. The audit trail could not prove otherwise, and the quality manager was unwilling to sign off on the process capability report.The replacement was a CM30/2​ in the same 92 × 92 mm cutout the old controller had occupied. Channel one took the Pt100 product probe directly; channel two took the 4–20 mA signal from the flow transmitter. A dual-loop template made the temperature loop the master and the flow loop the slave, while the on-demand autotune ran both PID sets in a single commissioning session. The operator now sees both loops and a real-time trend on the front-panel TFT, and the audit trail is a recorded curve rather than a verbal assurance. Line-speed changes no longer produce a visible temperature excursion, and the quality manager’s reports now carry trend data from the controller itself. The cabinet wiring was untouched except for the sensor and transmitter terminations.

Parameter

Main Parameters Value/Description
Product Model CM30/2 (ControlMaster CM30, Advanced functionality level)
Manufacturer ABB Measurement & Analytics (ControlMaster product family)
Product Category 1/4 DIN universal PID process controller, panel-mount, single or dual-loop
Display 3.5-inch full-color TFT LCD with soft keys and historical trending of 2 variables
Universal Inputs 2 channels: thermocouple B/E/J/K/L/N/R/S/T, Pt100 RTD, mV, V, mA, resistance, digital, frequency/pulse
Additional Inputs 2 further channels (voltage, current, thermocouple, digital)
Control / Retransmission Outputs 2 channels, 0–20 mA (or 4–20 mA), 750 Ω max. load, galvanically isolated 500 V for 1 minute
Relays 4 changeover contacts, 5 A / 240 V AC, update rate 125 ms
Digital I/O 6 user-programmable channels, IEC 61131-2, volt-free or 24 V DC
Control Strategies PID continuous or time-proportioning, ON/OFF, auto/manual station, analog backup, cascade, feedforward, ratio, predictive, adaptive, dual-loop
PID Range P 0–999.9 %, I 0–10,000 s, D 0–999.9 s; 3 sets via gain scheduling
Autotune On-demand autotune with adaptive gain mode
Math / Logic / Totalizer 8 math blocks, 8 logic equations (15 elements each), 2 totalizers, 2 delay timers, 2 custom linearizers (20 breakpoints)
Process Alarms 8 configurable alarms (high/low, latch, hysteresis) plus 2 real-time alarms
Communications IrDA standard (up to 115 kBaud, 1 m); optional Modbus RTU and Ethernet 10Base-T with Modbus TCP, web server, email
Transmitter Power Supply 2 × 24 V DC, 45 mA per loop
Supply Voltage 100–240 V AC, 50/60 Hz (90–264 V AC typical), max. 10 W
Operating Temperature 0 to 55 °C (32 to 131 °F); storage –20 to +70 °C
Humidity 5 to 95 % RH, non-condensing
Enclosure Sealing Front face IP66 / NEMA 4X; remainder IP20
EMC Compliance IEC 61326, industrial environment
Panel Cutout 92 × 92 mm (DIN 43700 / IEC 61554 1/4 DIN)
Overall Dimensions 96 × 96 mm face; approx. 110–141 mm behind-panel depth (model-dependent)
Configuration Front-panel menus or ConfigPilot PC software