Home › 2024 (Page 99)

Year: 2024

PCD230A101 3BHE022291R0101缩略图
Company News

PCD230A101 3BHE022291R0101

PCD230A101 3BHE022291R0101插图

PCD230A101 3BHE022291R0101

Here’s a detailed overview of the PCD230A101 and 3BHE022291R0101 products in English, including their parameters, specifications, dimensions, weight, series, features, and functions:

PCD230A101 Overview:

The PCD230A101 is typically a reference to a component or module that belongs to a larger system or product line. However, without a specific manufacturer’s context, it’s challenging to provide exact details. Assuming it’s a part of a power conversion, control, or drive system, here’s a generic overview:

  • Product Type: Likely a power control device, drive module, or similar component.
  • Application: Could be used in various industrial automation, machinery, or power conversion applications.
  • Series: Assuming it belongs to a series of similar products offered by a particular manufacturer.

Specifications & Parameters:

  • Voltage & Current Ratings: Will depend on the specific model and intended application.
  • Power Handling: Specified by the manufacturer for safe and efficient operation.
  • Control Functionality: May include advanced control algorithms or features for precise operation.

Dimensions & Weight:

  • Size: Dimensions vary by model and manufacturer.
  • Weight: Lightweight to medium, depending on the material and complexity of the component.

Features:

  • Compact Design: Space-saving design for easy integration into systems.
  • High Efficiency: Optimized for energy-efficient operation.
  • Programmable: May offer programmable features for customization to specific applications.
  • Monitoring & Protection: Includes monitoring and protection features to prevent damage during operation.

Functions & Applications:

  • Power Conversion: Converts power from one form to another, such as AC to DC or DC to AC.
  • Drive Control: Controls motors or other electrical devices to achieve precise speed, torque, or position control.
  • Industrial Automation: Used in various industrial automation systems for machine control, process automation, etc.

3BHE022291R0101 Overview:

The 3BHE022291R0101 is a more specific product code that likely refers to a unique part or module from a specific manufacturer. Again, without direct manufacturer information, the following is a generic overview:

  • Product Type: Could be a component for a larger system, such as a sensor, actuator, or control module.
  • Series: Belongs to the 3BHE series, indicating it’s part of a family of similar products.

Specifications & Parameters:

  • Performance Characteristics: Will vary depending on the intended application and manufacturer’s specifications.
  • Compatibility: Designed to work with specific systems or components from the same manufacturer.

Dimensions & Weight:

  • Size & Shape: Dimensions and shape will be tailored to the component’s function and intended installation environment.
  • Weight: Typically lightweight to facilitate easy installation and maintenance.

Features:

  • Durability: Designed for reliable operation in demanding industrial environments.
  • Interoperability: Compatible with other components in the same series or system.
  • Customization: May offer customization options to meet specific application requirements.

Functions & Applications:

  • Automation & Control: Used in automation and control systems for precise monitoring, control, or feedback.
  • Machine Building: Integrated into machinery for improved performance and reliability.
  • Industrial Processes: Utilized in various industrial processes to ensure smooth, efficient operation.

Note:

  • The information provided is based on generic assumptions and may not accurately reflect the specific details of the PCD230A101 and 3BHE022291R0101 products. For detailed, up-to-date, and accurate technical information, please refer to the manufacturer’s official documentation or contact the manufacturer directly.
PCD230A101 3BHE022291R0101插图1

PCD230A101 3BHE022291R0101

PCD230A101 3BHE022291R0101插图2

PCD230A101 3BHE022291R0101

By August 15, 2024
GE-VMIVME-4116缩略图
Industry trends

GE-VMIVME-4116

GE-VMIVME-4116插图

GE-VMIVME-4116

Here is an overview of the GE-VMIVME-4116 product in English, including its parameters, specifications, dimensions, weight, series, features, and applications:

Product Name: GE-VMIVME-4116

Product Parameters and Specifications:

  • Type: Digital I/O Module or Interface Card
  • Channels: Typically provides a high number of digital input/output (I/O) channels, such as 16, 32, 64, or more, depending on the specific model.
  • I/O Voltage: Supports various input and output voltage levels, commonly including TTL, CMOS, and industrial-standard levels.
  • Isolation: May offer optical or electrical isolation between channels or groups of channels for increased safety and signal integrity.
  • Buffering: Channels may be buffered to reduce noise and improve signal integrity.
  • Timing: Supports precise timing control for synchronous or asynchronous operations.

Dimensions and Weight:

  • Dimensions: The exact dimensions of the GE-VMIVME-4116 will depend on its form factor and design. It is likely to fit into a standard Eurocard size (e.g., 3U, 6U) if it’s a single-board computer (SBC) or a similar size if it’s a daughter card or add-on module.
  • Weight: The weight of the module will also depend on its design and materials used. As a general guide, digital I/O modules tend to be lightweight but can vary significantly depending on factors like the number of channels, isolation, and additional features.

Series:

  • The GE-VMIVME-4116 belongs to the VMIVME series of products from GE or a related company, which specializes in industrial automation, control, and embedded computing solutions.

Features:

  • High-Density I/O: Provides a large number of digital I/O channels in a compact form factor.
  • Flexibility: Configurable for various input/output voltage levels and timing requirements.
  • Isolation: Optional isolation features for improved signal integrity and safety.
  • Reliability: Designed for rugged industrial environments with features like over-voltage and over-current protection.
  • Ease of Integration: Supports standard communication protocols and interfaces for seamless integration into larger systems.

Applications:

  • The GE-VMIVME-4116 is typically used in industrial automation, control systems, and other applications requiring a large number of digital I/O channels.
  • It can be integrated into PLCs, data acquisition systems, and other industrial equipment to provide real-time control and monitoring capabilities.
  • The module is well-suited for applications where precise timing and reliable signal handling are essential, such as machine control, process automation, and robotics.

Please note that the specific parameters, specifications, and features of the GE-VMIVME-4116 may vary depending on the manufacturer’s offerings and product revisions. For the most accurate and up-to-date information, please refer to the manufacturer’s official documentation or contact their support team.

 

 

 

 

GE-VMIVME-4116插图1

GE-VMIVME-4116

GE-VMIVME-4116插图2

GE-VMIVME-4116

By August 9, 2024
GE-VMIVME-3122-210-VMIVME3122缩略图
Company News

GE-VMIVME-3122-210-VMIVME3122

GE-VMIVME-3122-210-VMIVME3122插图

GE-VMIVME-3122-210-VMIVME3122

Here is an overview of the GE-VMIVME-3122-210-VMIVME3122 product in English, including its parameters, specifications, dimensions, weight, series, features, and applications:

Product Name: GE-VMIVME-3122-210 (or VMIVME3122 with -210 suffix)

Product Parameters and Specifications:

  • Type: Industrial-grade Servo Controller / Analog Input/Output Module
  • Resolution: 16-bit A/D Converter
  • Input Channels: Supports 16, 32, or 64 differential or single-ended analog inputs
  • Gain: Programmable gain of x1 or x10 per channel
  • A/D Converter Range: ±2.5 V, ±5 V, ±10 V, 0 to +5 V, 0 to +10 V
  • Scan Rates: 381 Hz to 100 kHz (High-Performance Option), 381 Hz to 50 kHz (Standard Performance Option)
  • Data Buffer: 16 to 1,024 words of dual-port data buffer
  • Communication: Supports multiple communication protocols for configuration and data exchange
  • Operating Modes: Supports automatic scanning, data bursting, and external synchronization

Dimensions and Weight:

  • Dimensions: According to some sources, the VMIVME-3122 may have dimensions similar to 31.3cm x 29.2cm x 9.20cm1, but the exact dimensions for the -210 version may vary. Always refer to the manufacturer’s documentation for the most accurate information.
  • Weight: The weight of the VMIVME-3122 is mentioned as 2.2kg in some contexts1, but again, the -210 version’s exact weight may differ.

Series:

  • The VMIVME-3122 belongs to the VMIVME series of products from GE or a related company, which specializes in industrial automation and control systems.

Features:

  • High Resolution: 16-bit A/D conversion for precise analog measurement.
  • Flexible Configuration: Programmable channel gain and selectable A/D converter ranges.
  • High-Speed Scanning: Supports various scan rates to meet different application requirements.
  • Powerful Signal Processing: Capable of handling complex signals and data processing tasks.
  • Communication Compatibility: Supports multiple communication protocols for seamless integration into various systems.
  • Rugged Design: Suitable for industrial environments with features like over-temperature, over-voltage, and over-current protection2.

Applications:

  • The GE-VMIVME-3122-210 is typically used in automation and motion control applications, where precise control of equipment’s position, speed, and acceleration is crucial.
  • It is suitable for a wide range of industrial automation tasks, including but not limited to manufacturing, robotics, and process control.
  • The module can be integrated into larger systems or PLCs to provide real-time analog input/output capabilities.

Please note that the information provided is based on the general characteristics of the VMIVME-3122 series and may not exactly match the -210 version’s specifications. Always refer to the manufacturer’s official documentation or contact their support team for the most accurate and up-to-date information.

参考：

1|山西润盛进出口有限公司
2|哔哩哔哩

 

GE-VMIVME-3122-210-VMIVME3122插图1

GE-VMIVME-3122-210-VMIVME3122

GE-VMIVME-3122-210-VMIVME3122插图2

By August 9, 2024
GE-VMIVME2510B缩略图
Company News

GE-VMIVME2510B

GE-VMIVME2510B插图

GE-VMIVME2510B

 

Product Name: GE-VMIVME2510B

Product Parameters and Specifications:

  • Type: Single Board Computer (SBC) or Embedded Controller
  • Processor: Likely to be an Intel-based or equivalent high-performance processor (specifics may vary)
  • Memory: Typically includes RAM and flash memory for storage and processing
  • Expansion Slots: May include PCIe, PCI, or other slots for additional cards or interfaces
  • I/O Ports: Includes a variety of serial, parallel, USB, Ethernet, and possibly other interfaces

Dimensions and Weight:

  • Dimensions: Specific dimensions may vary, but typical SBCs are designed to fit into standard form factors like 3U or 6U Eurocard sizes. The VMIVME2510B’s exact dimensions would need to be confirmed from the manufacturer’s documentation.
  • Weight: Weight also varies depending on the components and materials used, but SBCs are generally lightweight for easy integration into systems.

Series:

  • The VMIVME2510B belongs to the VMIVME series of embedded controllers or SBCs from GE or a related company. The series is known for its high performance, reliability, and flexibility in various industrial and automation applications.

Features:

  • High Performance: Equipped with a powerful processor and sufficient memory to handle complex tasks.
  • Flexible Configuration: Allows customization through expansion slots and modular design.
  • Rugged Design: Suitable for harsh industrial environments, with features like shock and vibration resistance.
  • Reliable Networking: Provides robust networking capabilities through Ethernet and other communication protocols.
  • Longevity: Supports long-term availability and compatibility with legacy systems.

Applications:

  • The GE-VMIVME2510B is typically used in industrial automation, control systems, data processing, and other demanding applications where high reliability, performance, and customization are essential.
  • It can be integrated into machines, robots, and other equipment to provide real-time control, monitoring, and data processing capabilities.
  • It is also suitable for applications requiring communication with other devices or systems over Ethernet or other networks.

Please note that the specific parameters, specifications, and features of the GE-VMIVME2510B may vary depending on the manufacturer’s offerings and product revisions. For the most accurate and up-to-date information, please refer to the manufacturer’s official documentation or contact their support team.

 

 

GE-VMIVME2510B插图1

GE-VMIVME2510B

By August 9, 2024
GE-VME162PA344SE缩略图
Company News

GE-VME162PA344SE

GE-VME162PA344SE插图

GE-VME162PA344SE-

 

产品名称: GE-VME162PA344SE

Product Parameters and Specifications (产品参数和规格):

  • Drive Voltage: AC 110V-220V (驱动电压：交流110V-220V)1
  • Suitable Current: Below 7.0A (适配电流：7.0A以下)1
  • Motor Compatibility: Three-phase hybrid stepping motors with diameters ranging from 86-130mm (适配电机：外径86-130mm的三相混合式步进电机)1
  • Ethernet Communication: Supports Ethernet I/O for signal transmission over IP networks (以太网通信：支持通过IP网络进行信号传输的以太网I/O)2
  • Protocol Support: Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, HTTP, SNTP (协议支持：Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, HTTP, SNTP)2
  • Power Requirements: Nominal 24 VDC, Minimum 12 VDC, Maximum 48 VDC (电源需求：标称24 VDC，最小12 VDC，最大48 VDC)2
  • Digital Inputs (DI): 8 channels, supporting dry and wet nodes (数字输入：8通道，支持干节点和湿节点)2
  • Digital Outputs (DO): 8 channels, On-state voltage 24 VDC (typical), maximum 200 mA/channel (数字输出：8通道，开态电压24 VDC（典型），最大200 mA/通道)2

Dimensions and Weight (尺寸和重量):

  • Dimensions: 200x156x90 mm³ (尺寸：200x156x90毫米³)1
  • Weight: 1.6 kg (重量：1.6千克)1

Series and Features (系列和特征):

  • Series: Embedded Controller (系列：嵌入式控制器)3
  • Features:
    • Ethernet-based signal transmission (基于以太网的信号传输)2
    • High-speed peer-to-peer I/O (高速点对点I/O)2
    • Supports up to 16 host devices (支持最多16台主机设备)2
    • Remote monitoring via Modbus/TCP (通过Modbus/TCP实现远程监控)2
    • Phase memory function (相位记忆功能)1
    • Smooth low-speed operation with minimal vibration and noise (低速运行平稳，振动和噪音极小)1

Applications (作用):

  • Primarily used in power-related applications such as high-power motor control, inverters, and switching power supplies with high-frequency conversion areas (主要用于与电源相关的应用，如高功率电机控制、逆变器和具有高频转换区域的开关式电源)4
  • As an embedded controller, it can be integrated into various industrial automation systems for logic, motion, drive, and process control (作为嵌入式控制器，它可以集成到各种工业自动化系统中，用于逻辑、运动、驱动和过程控制)5
GE-VME162PA344SE插图1

GE-VME162PA344SE-

GE-VME162PA344SE插图2

GE-VME162PA344SE

By August 9, 2024
GE-VME7807RC350-00780-411000-VMIVME7807-411000 a缩略图
Company News

GE-VME7807RC350-00780-411000-VMIVME7807-411000 a

GE-VME7807RC350-00780-411000-VMIVME7807-411000 a插图

GE-VME7807RC350-00780-411000-VMIVME7807-411000 a

Product Parameters and Specifications

  • Type: Embedded Motherboard12345
  • Operating System: General Purpose System123
  • Dimensions: 1235mm x 2234mm123
  • Output Frequency: 60Hz13
  • Features: Embedded Motherboard, High Performance, Flexible Configuration12356
  • Material Code: VMIVME7807-4110001234
  • System Functionality: Normal12
  • System Environment: Automatic13
  • System Capability: Powerful12
  • Color: Green12
  • Weight: 0.5 (unit unspecified, possibly kg or lbs)12
  • Voltage: 220V13

Dimensions and Weight

  • Dimensions: 1235mm x 2234mm123
  • Weight: 0.5 (unit unspecified, possibly kg or lbs)12

Series

  • This product belongs to the VME series of embedded motherboards or Single Board Computers (SBCs) from General Electric (GE)12345.

Features

  • High Performance: Integrates an Intel Pentium M processor with up to 1.5 GB DDR SDRAM, providing high bandwidth and processing power7.
  • Flexibility: Features a PCI-X, 66 MHz PMC expansion slot and dual Gigabit Ethernet controllers5.
  • Environmental Compliance: RoHS compliant, free from lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBBs), and polybrominated diphenyl ethers (PBDEs)5.
  • Network Security: Used for secure communication through network encryption7.

Applications

  • The GE-VME7807RC350-00780-411000 (VMIVME7807-411000) serves as an embedded motherboard or SBC in industrial automation, control systems, data processing, and network communication applications. It provides robust computing power and networking capabilities, making it suitable for applications requiring high reliability and stability.

Please note that the product specifications and features may vary depending on the product version and configuration. It is recommended to consult the latest product documentation or contact the manufacturer for accurate and up-to-date information.

 

GE-VME7807RC350-00780-411000-VMIVME7807-411000 a插图1GE-VME7807RC350-00780-411000-VMIVME7807-411000-(1)

By August 9, 2024
GE-SR469-CASE-469-P1-HI-A20-E缩略图
Company News

GE-SR469-CASE-469-P1-HI-A20-E

GE-SR469-CASE-469-P1-HI-A20-E插图

GE-SR469-CASE-469-P1-HI-A20-E

英文总结

Product Overview:
GE-SR469-CASE-469-P1-HI-A20-E is a motor protection device or power module produced by General Electric, likely part of the GE Multilin 469 motor management relay series.

Technical Specifications:

  • Power Input: Accepts 90-300VDC and 70-265VAC, 48-62Hz.
  • Analog Output: 4 to 20 mA.
  • Display: Enhanced display with optional Ethernet enhancement (10Base-T).
  • Ethernet Port: Integrated on the relay back, indicated by “T” in the part number.

Dimensions and Weight:

  • Specific dimensions and weight are not mentioned in the search results. Refer to the product manual or contact the manufacturer for details.

Series and Features:

  • Series: Part of the GE Multilin 469 motor management relay series.
  • Features: 5A phase secondary, suitable for medium-voltage motors, comprehensive management and protection, power management functions, fault detection and protection, communication interface for remote management and control.

Role:

  • Designed for comprehensive management and protection of medium-voltage motors, ensuring safe and reliable operation of the motor system by providing stable power supply and monitoring motor status.

Note:

  • Information is compiled based on search results. Confirm the latest product information before purchase or use.
参考：

1|爱企查
2|哔哩哔哩
3|哔哩哔哩
4|知乎
+1 更多
GE-SR469-CASE-469-P1-HI-A20-E插图1

GE-SR469-CASE-469-P1-HI-A20-E

 

 

GE-SR469-CASE-469-P1-HI-A20-E插图2

GE-SR469-CASE-469-P1-HI-A20-E

By August 9, 2024
GE-V7768-322001缩略图
Company News

GE-V7768-322001

GE-V7768-322001插图

GE-V7768-322001

关于GE-V7768-322001的产品参数、规格、尺寸、重量、系列、特征和作用，以下是根据搜索结果提供的英文概述：

Product Parameters and Specifications

  • Product Name: GE-V7768-322001 VME Single Board Computer
  • Processor: Intel Core 2 Duo, up to 2.16 GHz
  • Cache: 4 MB L2 Cache
  • Memory: Up to 2 GB DDR2 SDRAM
  • Bus: 667 MHz system and memory bus
  • Storage: Up to 8 GB bootable CompactFlash
  • Expansion: 1 PCI-X PMC expansion slot
  • I/O Ports: 2 RS-232 serial ports, 1 Gigabit Ethernet port
  • Power: +12V, +5V, -12V, 3.3V
  • Power Consumption: <40 W
  • Operating Temperature: 0°C to 55°C
  • Storage Temperature: -40°C to 85°C
  • Humidity: 5% to 95% non-condensing

Dimensions and Weight

  • Dimensions: 233 mm x 167 mm x 23 mm1
  • Weight: Not specifically mentioned in the search results, but can be assumed to be relatively lightweight considering its compact dimensions.

Series

  • Belongs to GE’s VMEbus module series, designed for VMEbus applications.

Features

  • High Performance: Based on the Intel Core 2 Duo processor.
  • High Reliability: Suitable for demanding industrial, military, aerospace, and medical applications.
  • High Scalability: With expansion capabilities through the PCI-X PMC slot.
  • Multiple I/O Ports: Including Gigabit Ethernet and RS-232 serial ports for versatile connectivity.
  • Compact Design: Space-saving dimensions for easy integration.
  • Wide Operating Temperature Range: Ensures stable performance in various environments.

Functions and Applications

  • Data Processing: High-speed data processing capabilities.
  • Industrial Control: Suitable for industrial control applications requiring precise timing and reliable performance.
  • Communication: Enables communication with other devices and systems via Ethernet and serial ports.
  • Expansion: Allows for customization and expansion through additional PMC modules.
  • Application Areas: Industrial control, military, aerospace, medical, scientific research, and other VMEbus applications1.

Note

  • The above information is based on the latest search results available as of the current date (August 9, 2024).
  • For detailed and up-to-date product specifications, please refer to the official GE documentation or contact GE’s customer support.
  • Always ensure compliance with local safety regulations and standards when installing and operating industrial equipment.
参考：

1|深圳长欣自动化设备有限公司

 

 

GE-V7768-322001插图1

GE-V7768-322001

GE-V7768-322001插图2

By August 9, 2024
GE-UR1HH缩略图
Company News

GE-UR1HH

GE-UR1HH插图

GE-UR1HH

Product Parameters and Specifications

  • Product Name: GE-UR1HH Module
  • Type: Industrial Communication and Power Module
  • Communication Interface: RS485
  • Communication Protocol: Modbus RTU, with baud rates ranging from 1200bps to 115200bps (default 9600bps)
  • Power Supply Voltage: 9 ~ 30VDC
  • Operating Temperature Range: -40°C to 85°C

Dimensions and Weight

  • Dimensions: 78mm x 22mm x 109mm
  • Weight: Not specifically mentioned in the search results, but expected to be lightweight for its compact size.

Series

  • Belongs to GE’s industrial communication and control module series, specifically designed for industrial environments.

Features

  • High-speed Data Transmission: Enables efficient data exchange.
  • Rugged Design: Suitable for harsh industrial environments.
  • Wide Operating Temperature Range: Ensures reliable operation in extreme temperatures.
  • Multiple Communication Options: Including RS485 interface and Modbus RTU protocol support.
  • Compact Size: Space-saving design for easy installation and integration.
  • Easy-to-use Interface: Provides user-friendly operation and setup.

Functions and Applications

  • Data Communication: Facilitates data transfer between various industrial devices and systems.
  • Control and Monitoring: Enables remote control and monitoring of industrial processes and equipment.
  • Application Areas: Ideal for use in industries such as chemicals, petroleum, electronics, aerospace, and electrical engineering, where reliable communication and control are crucial1.

Note

  • The above information is based on the available search results and may not cover all aspects of the product.
  • For detailed and up-to-date product specifications, please refer to the official GE documentation or contact GE’s customer support.
  • Product weights and some other specific details may not be directly available in the search results and may require direct inquiry from the manufacturer.
  • Always ensure compliance with local safety regulations and standards when installing and operating industrial equipment.

 

 

 

 

 

 

GE-UR1HH插图1

GE-UR1HH

By August 9, 2024
GE-SD-98762-101-098762-001缩略图
Company News

GE-SD-98762-101-098762-001

Here’s a comprehensive overview of the GE-SD-98762-101-098762-001 product in English, including its parameters, specifications, dimensions, weight, series, features, and functions:

Product Overview

  • Model: GE-SD-98762-101-098762-001
  • Manufacturer: General Electric (GE)

Series

  • Series: This servo controller belongs to the SD series manufactured by GE for industrial automation and mechanical control systems123.

Parameters and Specifications

  • Power Supply: Typically designed for a specific input voltage range, which is usually specified in the official documentation. However, for a general servo controller, it might support voltages around 220V AC4.
  • Output Frequency: High output frequency capabilities, often suitable for precision control applications. Some mention a specific output frequency of 350kHz6, but it may vary based on the model.
  • Servo Motor Control: Designed to control one or more servo motors for precise position and speed control123.
  • Precision and Stability: Offers high-precision motion control capabilities and is stable for long-term operation12.

Dimensions and Weight

  • Dimensions and Weight: The exact dimensions and weight of the GE-SD-98762-101-098762-001 servo controller are not readily available in the search results. These specifications would typically be provided in the product’s official datasheet or on the manufacturer’s website.

Features

  • High-Precision Motion Control: Capable of executing complex positioning, trajectory tracking, and motion control tasks23.
  • Multiple Communication Interfaces: Equipped with various communication interfaces, such as Ethernet, CAN bus, Modbus, and Profibus, for easy integration with other devices and systems123.
  • Programmability and Flexibility: Supports programming functions, allowing users to customize motor control parameters and motion trajectories to suit specific application requirements14.
  • Real-Time Performance: Provides real-time control and response capabilities, ensuring accurate motion control in rapidly changing environments2.
  • Industrial-Grade Design: Constructed with high reliability, anti-interference, and protection features, suitable for industrial environments23.

Functions and Applications

  • Servo Motor Control: Used to control the rotation, linear movement, and other types of motion of servo motors12.
  • Industrial Automation: Integral part of industrial automation and mechanical control systems, providing precision motion control for various machinery and equipment145.
  • Machine Tool Control: Applied in CNC machine tools, robotic systems, and other precision machinery for accurate and repeatable motions14.

Additional Information

  • Since the exact dimensions, weight, and some other specifications of the GE-SD-98762-101-098762-001 servo controller are not available in the search results, it is recommended to consult the product’s official datasheet or contact the manufacturer for the most accurate and up-to-date information.
  • Industrial automation equipment often has complex specifications that require detailed analysis before selecting and integrating into a system. It is important to work with the manufacturer or a qualified professional to ensure proper selection, installation, and operation.

 

GE-SD-98762-101-098762-001插图

GE-SD-98762-101-098762-001

GE-SD-98762-101-098762-001插图1

GE-SD-98762-101-098762-001

GE-SD-98762-101-098762-001插图2

GE-SD-98762-101-098762-001

By August 9, 2024
  • Categories
Main Menu
Back to Top

Search For Products

Popular searches
Product has been added to your cart