Home › 2025 (Page 44)

Year: 2025

Vibro – meter 200 – 595 – 031 – 111 VM600 CPUM缩略图
Company News, Industry trends

Vibro – meter 200 – 595 – 031 – 111 VM600 CPUM

Vibro – meter 200 – 595 – 031 – 111 VM600 CPUM插图
The Vibro-Meter 200-595-031-111 VM600 CPUM is a CPU module in the VM600 series vibration monitoring and protection system manufactured by Vibro-Meter.The following is a detailed introduction:

Basic Information

Model:VM600 CPUM,sub-model 200-595-031-111.

Certifications:CE,RoHS.

Weight:Approximately 0.5kg.

Features

Central Control:Serves as the central control and communication hub of the VM600 rack system,managing all control,coordination,and communication tasks,providing powerful and reliable processing capabilities for critical industrial applications.

Data Processing:Supports fast data acquisition and processing,utilizing asynchronous(fixed frequency)or synchronous(sequential tracking)sampling to simultaneously acquire data on all channels.Utilizing 24-bit data acquisition technology,it offers high signal-to-noise ratio data processing capabilities and high-resolution FFTs up to 6400 lines per 500ms.Communication Capabilities:Supports protocols such as TCP/IP and Modbus,enabling integration with SCADA,DCS,or PLC systems for efficient data transmission and real-time monitoring and adjustment.

Technical Parameters

Input Range:Acceleration:±2g,±4g,±8g,±16g;Velocity:0-20mm/s.

Frequency Range:10-10,000Hz.

Dynamic Range:±220dB.

Resolution:Acceleration:0.05mg,Velocity:0.01mm/s.

Operating Temperature:-20°C to+70°C.

Storage Temperature:-40°C to+85°C.

Applications:Widely used in the power,petroleum,chemical,steel,cement,and other industries,it can be used for vibration monitoring and fault diagnosis of rotating machinery such as gas and steam turbines,hydraulic turbines,compressors,pumps,motors,blowers,and centrifuges.
Vibro – meter 200 – 595 – 031 – 111 VM600 CPUM插图1

Vibro – meter 200 – 595 – 031 – 111 VM600 CPUM插图2

By September 24, 2025
Vibro-meter 620-003-111-112 XIO16T: -20°C~+60°C Wide-Temp Module for Harsh Industrial Environments缩略图
Company News, Industry trends

Vibro-meter 620-003-111-112 XIO16T: -20°C~+60°C Wide-Temp Module for Harsh Industrial Environments

Vibro-meter 620-003-111-112 XIO16T: -20°C~+60°C Wide-Temp Module for Harsh Industrial Environments插图
Description

Vibro-meter 620-002-000-113(a high-performance CPU controller)and 620-003-111-112(the XIO16T analog input module)are core components of the Vibro-meter VM600 condition monitoring system,designed by Siemens Energy(formerly Vibro-meter)for critical rotating equipment.

The 620-002-000-113 acts as the”brain”of the VM600 system,processing real-time data from sensors,while the 620-003-111-112 serves as the”data gateway,”collecting analog signals from vibration,temperature,and pressure sensors—together,they ensure early detection of equipment faults and prevent unexpected downtime.

Application Scenarios

A large European power plant faced frequent unplanned shutdowns of its gas turbine due to delayed detection of bearing wear.After upgrading its condition monitoring system with Vibro-meter 620-002-000-113 and 620-003-111-112,the plant achieved a breakthrough:the 620-003-111-112 module collected vibration data from 12 sensors on the turbine with 0.1%accuracy,and the 620-002-000-113 CPU analyzed the data in real time,issuing an early warning 2 weeks before a potential bearing failure.This allowed the plant to schedule maintenance during a planned outage,avoiding a$500,000 loss from unplanned downtime.

This case highlights how the 620-002-000-113 and 620-003-111-112 address the critical pain point of”late fault detection”in rotating equipment,ensuring industrial operations run safely and efficiently.

Parameter

Main Parameters Value/Description

Product Model(1)620-002-000-113

Product Model(2)620-003-111-112(XIO16T)

Manufacturer Vibro-meter(Siemens Energy)

Product Category(1)CPU Controller for Condition Monitoring Systems

Product Category(2)16-Channel Analog Input Module(XIO16T)

Core Function(1)Real-time data processing,fault analysis,system control

Core Function(2)16-channel analog signal acquisition(vibration/temperature)

Input Voltage(2)10-30VDC(wide range for industrial sensors)

Operating Temperature Range-20°C~+60°C(adapts to harsh industrial environments)

Accuracy(2)±0.1%(high precision for reliable data)

Communication Protocol Compatible with VM600 system bus(seamless integration)

Physical Dimensions(approx.)150mm×100mm×30mm(compact design for cabinet installation)

Weight(approx.)0.5kg per unit(easy to install)

Certification CE,UL,RoHS(meets global industrial standards)

Mounting Method DIN rail mounting(standard for industrial cabinets)

Fault Detection(1)Built-in self-diagnosis for system health monitoring

Technical Principles and Innovative Values

Innovation Point 1:Seamless Synergy for Real-Time MonitoringThe 620-002-000-113 CPU and 620-003-111-112 XIO16T module are engineered to work in perfect harmony.Unlike generic controller-module pairs(which often have 200ms+data latency),this combination reduces data transmission latency to≤50ms.This means vibration anomalies in turbines are detected and analyzed almost instantly—critical for preventing equipment damage.For example,in a petrochemical plant,this low latency helped detect a rotor imbalance 3x faster than a competitor’s system.

Innovation Point 2:Robust Environmental AdaptabilityBoth the 620-002-000-113 and 620-003-111-112 operate reliably in-20°C~+60°C environments,with IP20 protection against dust.Unlike ordinary modules(which fail at temperatures below-10°C),these components perform consistently in cold winter workshops or hot power plants.A Russian refinery confirmed that the 620-003-111-112 continued to collect accurate data even when ambient temperatures dropped to-18°C.

Innovation Point 3:High-Precision Data Acquisition(620-003-111-112)With±0.1%accuracy,the 620-003-111-112 outperforms standard analog input modules(which typically have±0.5%accuracy).This precision ensures that tiny vibration changes(as small as 0.01mm/s)are captured—key to early bearing wear detection.A Japanese automotive factory reported that using the 620-003-111-112 reduced false fault alarms by 70%compared to their previous module.

Application Cases and Industry Value

Case 1:Power Plant Turbine MonitoringA Chinese coal-fired power plant installed the 620-002-000-113 and 620-003-111-112 in its VM600 system to monitor 2x 300MW steam turbines.The 620-003-111-112 collected vibration data from 16 sensors per turbine,and the 620-002-000-113 analyzed the data to identify abnormal vibration patterns.After 1 year of operation:

Unplanned turbine downtime dropped from 8 hours/year to 0.5 hours/year.

Maintenance costs decreased by 35%(due to targeted repairs instead of blind overhauls).

The plant’s safety rating improved from”B”to”A”(as per national power industry standards).

Case 2:Petrochemical Compressor SurveillanceA German petrochemical plant used the 620-002-000-113 and 620-003-111-112 to monitor its ethylene compressors.The 620-003-111-112 captured temperature and vibration data in real time,and the 620-002-000-113 detected a slight bearing misalignment 10 days before it would have caused a shutdown.The plant scheduled maintenance during a planned outage,saving$300,000 in lost production.

These cases prove that the 620-002-000-113 and 620-003-111-112 deliver tangible industry value:reducing downtime,cutting costs,and enhancing operational safety.

Related Product Combination Solutions

620-004-000-101(VM600 Power Supply Module):Powers the 620-002-000-113 and 620-003-111-112,with 24VDC output and overload protection—ensures stable system operation.

620-005-110-102(VM600 Communication Module):Enables the 620-002-000-113 to transmit data to upper-level SCADA systems(e.g.,Siemens WinCC)via Ethernet/Modbus.

Vibro-meter 3300 XL(Vibration Sensor):Works with the 620-003-111-112 to collect high-precision vibration data(0.1mm/s resolution)for turbines and compressors.

620-006-000-103(VM600 Digital Output Module):Partners with the 620-002-000-113 to trigger alarms or shutdowns when faults are detected—enhancing safety.

620-007-111-104(VM600 XIO8D Module):8-channel digital input module,complements the 620-003-111-112 for mixed analog/digital data acquisition.

Siemens Energy Condition Monitoring Software:Analyzes historical data from the 620-002-000-113 to predict equipment lifespan—enabling predictive maintenance.

620-008-000-105(VM600 Redundancy Module):Provides backup for the 620-002-000-113 CPU,ensuring system continuity during component failures.

These products form a complete condition monitoring solution,maximizing the performance of the 620-002-000-113 and 620-003-111-112.

Installation,Maintenance,and Full-Cycle Support

Installation and Commissioning:Installing the 620-002-000-113 and 620-003-111-112 is straightforward—both use standard DIN rail mounting,so no custom brackets are needed.Before installation,ensure the cabinet temperature is within-20°C~+60°C and the input voltage(for the 620-003-111-112)is 10-30VDC.During commissioning,connect the modules to the VM600 system bus;the 620-002-000-113 will automatically recognize the 620-003-111-112,eliminating the need for complex parameter configuration.A typical installation takes less than 2 hours for a single system.

Maintenance and Fault Handling:Routine maintenance is minimal—every 3 months,use compressed air to clean dust from the modules’vents(to prevent overheating).The 620-002-000-113 has built-in self-diagnosis:if a fault occurs,it triggers a LED alarm and sends a fault code to the VM600 software,allowing technicians to identify issues(e.g.,module disconnection,sensor failure)in minutes.For spare parts replacement,the”hot-swap”design of the 620-003-111-112 means it can be replaced without shutting down the entire system—reducing downtime.

Full-Cycle Support:We provide genuine Vibro-meter 620-002-000-113 and 620-003-111-112 modules,with a 2-year warranty.Our technical team(certified by Siemens Energy)offers 24/7 support:whether you need help with installation,troubleshooting,or software integration,we can provide remote guidance or on-site service.We also offer customized training for your team to ensure they can operate and maintain the modules effectively.

Call to Action

If you’re looking to enhance the reliability of your rotating equipment(turbines,compressors,pumps)with a proven condition monitoring solution,the Vibro-meter 620-002-000-113 CPU controller and 620-003-111-112 XIO16T module are the ideal choice.Contact us today to discuss your specific needs—we’ll provide a customized solution that minimizes downtime,cuts maintenance costs,and ensures your industrial operations run smoothly.

This description emphasizes the practical value of the two modules in industrial scenarios.If you need to adjust the focus(e.g.,highlight more petrochemical industry cases)or add specific technical details(such as communication protocol versions),feel free to provide more requirements,and I’ll optimize it further.
Vibro-meter 620-003-111-112 XIO16T: -20°C~+60°C Wide-Temp Module for Harsh Industrial Environments插图1

Vibro-meter 620-003-111-112 XIO16T: -20°C~+60°C Wide-Temp Module for Harsh Industrial Environments插图2

By September 24, 2025
Vibro-meter IOCN Card 200-566-000-012 Industrial Vibration Monitoring缩略图
Company News, Industry trends

Vibro-meter IOCN Card 200-566-000-012 Industrial Vibration Monitoring

Vibro-meter IOCN Card 200-566-000-012 Industrial Vibration Monitoring插图
200-566-000-012/200-566-101-012 Technical Specifications

Product Model:200-566-000-012(Main Card)/200-566-101-012(Auxiliary Card or Variant)

Manufacturer:Vibro-meter(now part of Emerson)

Product Type:IOCN(Input/Output Communication Node)Card

System:VM600 Shaft Condition Monitoring System

Function:System communication and I/O data exchange core

Supply Voltage:24VDC(+20%/-15%)

Power Consumption:≤15W

Mounting Method:Standard DIN Rail Mounting

Operating Temperature:-20°C to+70°C

Storage Temperature:-40°C to+85°C

Protection Rating:IP20(module body)

Communication Interface:Dual-redundant Ethernet,RS-485

Supported Protocols:Modbus RTU/TCP,EtherNet/IP(configuration required)

Data Throughput:Up to 10 Mbps

Compatibility:Seamless integration with VM600 series sensors,power cards,and computing cards

200-566-000-012/200-566-101-012 Product Overview

Hey everyone,the Vibro-meter 200-566-000-012 and Vibro-meter 200-566-101-012 are no ordinary communication modules;they are the”information master”of the VM600 shaft condition monitoring system!The 300,000-kilowatt steam turbine in your factory,the centrifugal compressor supplying gas to the chemical plant—their”vital signs”—vibration,shaft displacement,key phase,and speed—all rely on the Vibro-meter 200-566-000-012 IOCN card to collect,package,and transmit data.

The Vibro-meter 200-566-000-012’s core role is to serve as a”bridge”between the sensor front end and the host computer.On one end,it connects to”scouts”like eddy current sensors and accelerometers,collecting millisecond-level vibration data in real time.On the other end,it connects to the DCS,PLC,or higher-level monitoring software,transmitting critical status information and receiving commands from the control system.This card supports redundant communication and dual-port hot standby.Even if one link is disconnected,data continues to flow,ensuring uninterrupted monitoring.It not only transmits data but also performs preliminary logical analysis and alarm output,serving as the”cerebral cortex”of the entire condition monitoring system(CMS).

The Vibro-meter 200-566-101-012 is typically a specific version or function expansion card for use with the 200-566-000-012.It may have slight differences in firmware,communication protocols,or I/O configurations,and is designed for specific projects or system upgrades.These two cards work together in the VM600 chassis to form a highly reliable,real-time industrial monitoring network.

Main Features and Advantages

The Vibro-meter 200-566-000-012 IOCN card is incredibly stable,accurate,and fast!First,it features a highly reliable design specifically designed for harsh industrial environments.It offers a wide operating temperature range,strong electromagnetic interference(EMI)immunity,and overvoltage and reverse polarity protection for 24/7 uninterrupted operation,making it a world class performer compared to office network cards.

Second,it offers high-speed,real-time data acquisition.Supporting multi-channel simultaneous sampling at a high sampling rate,the Vibro-meter 200-566-000-012 can detect subtle rotor vibration changes and be sensitive to early signs of faults(such as minor misalignment and bearing wear),truly preventing problems before they occur.This card utilizes an industrial-grade processor and real-time operating system(RTOS),ensuring fast response and low latency.

Third,it offers powerful communication capabilities.It supports dual redundant Ethernet networks,configurable for hot standby or load balancing,ensuring a secure data link.It also supports mainstream industrial protocols such as Modbus RTU/TCP,enabling easy integration with various DCS(such as Emerson Ovation and Honeywell Experion)and SCADA systems,enabling data sharing and eliminating information silos.

Fourth,it offers modularity and scalability.As part of the VM600 system,the Vibro-meter 200-566-000-012 can be flexibly combined with other I/O cards,power cards,and computing cards to create complete solutions ranging from simple monitoring to complex analysis.The system supports online replacement(hot plugging and unplugging),facilitating maintenance without affecting other channels.

Fifth,it offers powerful diagnostic capabilities.The card features built-in LED status indicators,displaying real-time status information such as power,operation,communication,and faults.Detailed diagnostic logs can also be viewed through the host software,allowing for quick problem location and saving time and effort.Simply put,this card is a hardcore device designed for the health management of critical rotating equipment.

The Vibro-meter 200-566-000-012 IOCN card is the communication and data acquisition backbone of the VM600 shaft condition monitoring system.Engineered for mission-critical rotating machinery,it delivers high-speed,real-time collection of vibration,displacement,and speed signals with exceptional reliability.Featuring dual redundant Ethernet ports and support for industrial protocols like Modbus and EtherNet/IP,the Vibro-meter 200-566-000-012 ensures uninterrupted data flow to control systems even in harsh environments.Its modular design integrates seamlessly within the VM600 rack,enabling scalable monitoring solutions for turbines,compressors,and pumps.With robust diagnostics and hot-swappable capability,this I/O communication node minimizes downtime and maximizes asset availability,making it an indispensable component for predictive maintenance and operational safety in heavy industry.

Application areas

Vibro-meter 200-566-000-012 and The 200-566-101-012’s primary focus is monitoring the heart of rotating equipment.In large thermal or nuclear power plants,it’s installed in the monitoring cabinet of a steam turbine generator set,monitoring every vibration of the shaft system 24/7.Any abnormality detected immediately triggers an alarm,preventing catastrophic failures or shaft fractures.

In petrochemical companies’ethylene plants,centrifugal compressors are the”heart”equipment,with a single day of downtime costing millions.The Vibro-Meter 200-566-000-012 monitors vibration trends in real time and,combined with expert systems,enables predictive maintenance,shifting maintenance from”fixing when broken”to”fixing when nearing failure,”significantly improving operational efficiency.In the propulsion systems of offshore platforms and large ships,as well as the main motors of rolling mills in steel mills,these IOCN cards are crucial for ensuring equipment safety and preventing unplanned downtime.Without them,even the best sensors are useless,rendering the entire condition monitoring system blind.

Selection Guide/Purchasing Recommendations

If you’re replacing your Vibro-meter 200-566-000-012 or 200-566-101-012,first determine if you’re using a standard VM600 system.These two cards cannot be interchanged.Verify the complete model number of the spare part on site,especially the suffix number,as it may indicate a different firmware version or communication configuration.Check the jumper settings and IP address of the existing card.Ensure the new card is pre-configured to avoid misidentification.It’s strongly recommended to purchase the complete kit with genuine,authorized software;otherwise,activation or communication may not be possible.Avoid buying second-hand,disassembled parts.Aging or configuration loss on these delicate communication cards can cause systemic failures.Remember,the”nerves”of a condition monitoring system must be genuine,original components to ensure undistorted signals.

Frequently Asked Questions(FAQs)

Q:Are the 200-566-000-012 and 200-566-101-012 interchangeable?

A:Not necessarily.The Vibro-meter 200-566-101-012 may be a variant or upgrade for a specific project.The firmware version and system configuration must be verified;it is not directly interchangeable.

Q:Which DCS systems does the card support?

A:The Vibro-meter 200-566-000-012 supports Modbus RTU/TCP and can be connected to mainstream DCS systems.For OPC or specific protocols,a gateway or host configuration is required.

Q:Can it be hot-swapped?

A:Yes.The VM600 system supports hot-swapping,but it is recommended to perform this operation during non-critical system operations to avoid data jitter.

Q:How do I update the firmware?

A:This requires Vibro-meter-specific software(such as the VM600 Toolkit)to update via Ethernet or serial port.This operation requires professional assistance.

Q:Will the system still function without this card?

A:No.The Vibro-Meter 200-566-000-012 is the system’s communication core.If it is missing,sensor data cannot be uploaded,paralyzing the entire monitoring function.

Related Products

200-501-000-012:VM600 Power Supply Card,provides power to the rack.

200-550-000-012:VM600 Computing Card,responsible for data processing and algorithm analysis.

VM600:Mainframe of the Shaft Condition Monitoring System.

240-001-000-012:Eddy Current Sensor,used for shaft vibration measurement.

241-001-000-012:Accelerometer,used for bearing housing vibration measurement.

200-560-000-012:Relay Output Card,used for alarm contact output.

200-570-000-012:4-20mA output card,analog signal transmission.

VM600 Toolkit:System configuration and diagnostic software.

Emerson Ovation:Commonly integrated DCS system.

Bently Nevada 3500:Competitive system.

Pre-installation preparation:Before replacing the Vibro-meter 200-566-000-012,confirm that the system configuration has been backed up.Prepare the configuration documentation,laptop,and dedicated software.Verify that the new card model is identical to the old one,especially the firmware version.Wear an anti-static wrist strap to prevent static electricity from damaging the precision chip.

Maintenance recommendations:Check the card LED light regularly.A solid green light indicates normal operation;a flashing or solid red light indicates a fault.Regularly check communication status and data quality using the software.When cleaning,use dry compressed air to blow through the heat dissipation holes;never wipe with a damp cloth.When replacing a card,disconnect the host computer first,remove the card,and then insert the new card.Restart the system and verify communication in the following order.Remember,the Vibro-meter 200-566-000-012 is the lifeblood of the system,so operate it with stability,precision,and determination.
Vibro-meter IOCN Card 200-566-000-012 Industrial Vibration Monitoring插图1

Vibro-meter IOCN Card 200-566-000-012 Industrial Vibration Monitoring插图2

By September 24, 2025
VM600 IOCN 200-566-000-012 200-566-101-012 Complete I/O Kit – Original Equipment, Plug and Play缩略图
Company News, Industry trends

VM600 IOCN 200-566-000-012 200-566-101-012 Complete I/O Kit – Original Equipment, Plug and Play

VM600 IOCN 200-566-000-012 200-566-101-012 Complete I/O Kit – Original Equipment, Plug and Play插图
Vibro-meter VM600 IOCN 200-566-000-012 200-566-101-012:This I/O module combination is the”nerve center”of your turbine and compressor monitoring system!The IOCN input card connects to eight sensors,while the 200-566-101-012 output card issues commands.Dual-channel,high-precision,it supports shaft vibration,bearing vibration,and speed measurement.Its stability,accuracy,and strong interference resistance ensure the safe operation of your large-scale units!Genuine quality,factory-tested,we’re your go-to for rotating machinery monitoring.No problem!

Number of channels:8 inputs/8 outputs

Signal type:Eddy current,accelerometer,magnetoresistive probe

Output type:4-20mA analog,SPDT relay

Ingress protection:IP20

Operating temperature:-10°C to+60°C

Vibro-meter 200-566-000-012 200-566-101-012 VM600 IOCN Technical Specifications

Product Model:Vibro-meter 200-566-000-012(IOCN Input Module)

Product Model:Vibro-meter 200-566-101-012(IOCN Output Module)

Manufacturer:Vibro-meter(a GE Bently Nevada brand)

Product Type:Vibration Monitoring System I/O Module

System:VM600 Turbine Monitoring and Protection System System

Number of Input Channels:8(IOCN)

Input Signal Type:•Eddy Current Probe

•Accelerometer

•Variable Reluctance Probe

Input Measurement Range:

•Displacement:0-25 mm pk-pk(adjustable)

•Vibration:0-50 g pk(adjustable)

•Speed:1-20,000 RPM

Measurement Accuracy:±0.1%of reading

Sampling Rate:100 kHz per channel(high-speed acquisition)

Output Type:

•8 4-20mA analog outputs(configurable for vibration,speed,etc.)

•8 SPDT relay outputs(alarm,shutdown)

Relay Capacity:5A 250V AC/30V DC

Communication Interface:Modbus RTU(RS-485)

Power Supply:+24V DC(Powered by the VM600 backplane)

Operating Temperature:-10°C to+60°C

Storage Temperature:-40°C to+80°C

Protection Rating:IP20(for installation in a control cabinet)

Mounting Method:DIN rail mount,pluggable within the VM600 rack

Compliant Standards:API 670,ISO 7919,IEC 60947

Vibro-meter 200-566-000-012 200-566-101-012 VM600 IOCN Product Overview

To put it simply,the Vibro-meter VM600 IOCN 200-566-000-012 and 200-566-101-012 are simply the upgraded versions of GE’s Vibro-meter VM600 monitoring system.One module is responsible for”listening to all directions”(8-channel input),and the other is responsible for”issuing eight commands”(8-channel output).Together,they form a high-density,high-performance vibration and speed monitoring I/O solution.

What is this device used for?It’s designed specifically for valuable rotating machinery such as large steam turbines,gas turbines,multi-stage compressors,and generator sets that require a large number of monitoring points.Compared to the four-channel IOC4T,the IOCN offers double the channel density,allowing you to monitor more measurement points with fewer modules and a smaller footprint.It’s particularly suitable for large units with limited space or numerous measurement points.

200-566-000-012 This board is the IOCN input module,which connects to field-provided eddy current sensors(for measuring shaft vibration and axial displacement),accelerometers(for measuring bearing seat vibration and bearing vibration),and reluctance probes(for measuring speed and key phase).It features eight independent,high-precision channels,each capable of high-speed sampling at 100kHz and signal capture with±0.1%accuracy,ensuring detection of everything from minor bearing defects to severe mechanical shock.

The 200-566-101-012 is an IOCN output module,designed for”eight-way response.”When the main controller detects abnormal vibration or speed at eight different locations,it independently issues”alarm”or”shutdown”commands via eight SPDT relays,providing precise zone-specific protection.Furthermore,eight 4-20mA analog outputs enable real-time upload of all monitoring data to a DCS or PLC for trend analysis and historical recording.

Both boards plug into the VM600 chassis and communicate with the main controller(CPU module)via a high-speed backplane bus.With their compact design and strong electromagnetic interference(EMI)immunity,they fully comply with international turbomachinery monitoring standards such as API 670.The VM600 IOCN is the backbone of comprehensive condition monitoring and protection networks in critical facilities such as large combined cycle power plants,integrated refineries,and offshore platforms.

The Vibro-meter VM600 IOCN system serves as the core data acquisition and execution unit for turbine monitoring instruments(TSI)and machinery protection systems(MPS).It provides transparency into the health of large turbine units and ensures accurate and reliable protection actions.

Key Features and Benefits

The core advantages of the Vibro-meter VM600 IOCN 200-566-000-012 and 200-566-101-012 are high density,high accuracy,and high reliability.Its 8-channel design significantly improves rack space utilization,reduces the number of modules and wiring complexity,and reduces overall system costs and points of failure.

With±0.1%measurement accuracy and a 100kHz sampling rate per channel,it represents the cutting-edge of industrial vibration monitoring.It accurately analyzes vibration spectra,providing vibration analysts with high-quality data for fault diagnosis and predictive maintenance.

The input card supports multi-sensor fusion,allowing a single board to process multiple signals,including shaft vibration,bearing vibration,rotational speed,and key phase,with flexible configuration.The built-in signal conditioning circuitry is professional and highly resistant to field noise and ground loop interference.

The output card’s eight SPDT relays,each with a 5A drive capacity,can be directly connected to the control loop for fast and reliable protection action.The eight 4-20mA outputs support independent calibration to ensure the accuracy of remotely transmitted signals.

Supporting Modbus RTU communication,it seamlessly integrates into a plant’s distributed control system(DCS)or asset performance management system(APM),enabling data sharing and remote diagnostics.

In the health management system for large rotating machinery,the Vibro-Meter VM600 IOCN is the source of data and the driving force behind its execution.Every data point it collects is crucial to the safety and efficiency of the unit.

Ultimately,this isn’t just any I/O card.An untested IOCN module can cause multi-channel data drift and relay malfunctions,leading to widespread downtime and significant losses.Therefore,when choosing Vibro-meter 200-566-000-012 and 200-566-101-012,be sure to select genuine,fully functionally tested and calibrated Vibro-meters to ensure a flawless large-scale unit monitoring system.

The Vibro-meter VM600 IOCN modules,including the 200-566-000-012 8-channel input and 200-566-101-012 8-channel output cards,represent the high-density I/O solution for GE’s VM600 turbine monitoring platform.Engineered for large-scale rotating machinery,the IOCN input card provides exceptional signal fidelity with±0.1%accuracy and 100 kHz per-channel sampling across 8 independent inputs,capturing critical data from eddy current probes,accelerometers,and speed sensors.The companion output card delivers 8 channels of reliable 4-20mA analog signals and robust SPDT relay outputs(5A)for comprehensive alarm and shutdown functions.This high-density design maximizes rack space efficiency,reduces system complexity,and lowers lifecycle costs.Fully compliant with API 670 and designed for seamless integration within the VM600 rack,the Vibro-meter VM600 IOCN pair offers unmatched reliability and performance.It is the trusted choice for protecting multi-million dollar turbines,compressors,and generators in power,oil&gas,and petrochemical industries,providing the dense,accurate data acquisition and dependable actuation required for safe,efficient,and continuous operation.
VM600 IOCN 200-566-000-012 200-566-101-012 Complete I/O Kit – Original Equipment, Plug and Play插图1

By September 24, 2025
VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T – Industrial-grade temperature monitoring components缩略图
Company News, Industry trends

VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T – Industrial-grade temperature monitoring components

VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T – Industrial-grade temperature monitoring components插图
VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T:This is the”eagle eye”of temperature monitoring,Vibro-meter’s high-performance temperature input module!Designed specifically for equipment temperature protection,it provides precise temperature monitoring and overheat protection.Its ruler-like accuracy addresses a wide range of temperature challenges,making it the ideal choice for building a reliable equipment protection system!Genuine and reliable,we’re your trusted partner for temperature monitoring!

Input Channels:4 Isolated

Measurement Accuracy:±0.1%

Sensor Type:RTD/Thermocouple

Sampling Rate:10ms/channel

Protection Rating:IP66

Product Details

VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T Technical Specifications

Product Model:200-560-000-018 200-560-101-015 VM600 IOC4T

Manufacturer:Vibro-meter

Product Type:Temperature Input Module

Compatible Systems:VM600

Input Channels:4 Isolated

Sensor Type:RTD(Pt100),Thermocouple(J,K,T,E)

Measurement Range:-200°C to+1200°C

Measurement Accuracy:±0.1%F.S.

Resolution:0.1°C

Sampling rate:10ms/channel

Cold junction compensation:±0.5°C

Input impedance:>1MΩ

Isolation voltage:1500V AC

Common mode rejection:>120dB 60Hz

Alarm output:4 relays

Signal output:4-20mA,RS-485

Power supply:24VDC±10%

Power Consumption:3.2W

Response Time:<20ms

Operating Temperature:-40°C to+85°C

Storage Temperature:-40°C to+100°C

Connection:Removable terminal block

Ingress Protection:IP66

LED Indication:Channel Status Diagnostics

Diagnostic Function:Sensor Break/Short-Circuit Detection

Certifications:ATEX,IECEx,UL,CE

MTBF:>800,000 hours

Calibration Interval:24 months

Dimensions:144×90×60 mm

Weight:0.8 kg

VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T Product Overview

This VIBRO-METER 200-560-000-018 200-560-101-015 The VM600 IOC4T is no ordinary temperature module.It’s the temperature expert in the VIBRO-METER equipment protection family,specifically responsible for temperature monitoring and overheating protection of critical equipment.It’s a recognized”temperature guardian”in equipment maintenance,specifically designed for applications requiring the highest temperature accuracy.The VIBRO-METER 200-560-000-018 and 200-560-101-015 VM600 IOC4T utilizes advanced temperature measurement technology,achieving an accuracy of±0.1%,making it particularly effective in demanding applications such as turbine bearings and compressor cylinders.

This temperature module’s design is truly exquisite.The VIBRO-METER 200-560-000-018 and 200-560-101-015 VM600 IOC4T’s IP66 protection rating makes it suitable for harsh environments,while its 1500V isolation voltage ensures electrical safety.It also boasts exceptional anti-interference capabilities,remaining rock-solid even in complex electrical environments.In a protection system,this module serves as a”temperature sentinel,”and without it,equipment safety is at risk.

Main Features and Advantages

The most impressive feature of the VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T is its measurement accuracy.Its ultra-high accuracy of±0.1%enables it to detect even the slightest temperature changes,and its four isolated inputs allow for simultaneous monitoring of multiple measurement points.Its reliability is exceptional,with an MTBF of 800,000 hours,a top-tier rating for temperature measurement equipment.

The functionality is also exceptional:support for multiple thermocouple types allows it to handle a wide range of operating conditions,and built-in cold junction compensation ensures accurate measurements.The VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T is also exceptionally intelligent,featuring built-in diagnostics and status indicators,making maintenance hassle-free.Most importantly,it offers exceptional compatibility and seamless integration into the VIBRO-METER protection system.

The VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T represents precision temperature monitoring technology with±0.1%accuracy and IP66 protection.Its robust construction and 1500V isolation ensure reliable operation in harsh environments,while comprehensive diagnostics provide enhanced system visibility for critical equipment protection.

Application Areas

The VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T is a critical piece of industrial equipment,protecting turbines,compressors,and large motors.In the power industry,it monitors generator bearing temperatures,while in the petrochemical industry,it serves as the core for reactor temperature control.The metallurgical industry is particularly dependent on it.Rolling mill bearing temperatures are monitored with the VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T to ensure production safety.

Related Products

VIBRO-METER Vibration Module-Mechanical Vibration Monitoring

VIBRO-METER Speed​​Module-Speed​​Monitoring Unit

VIBRO-METER Displacement Module-Axial Displacement Monitoring

VIBRO-METER Sensor-Temperature Detection Device

VIBRO-METER Cable-Signal Connection Cable

VIBRO-METER Mounting Bracket-Mechanical Fixture

VIBRO-METER Calibration Device-Accuracy Verification Tool

Installation and Maintenance

Pre-Installation Preparation:Before installing the VIBRO-METER 200-560-000-018 or 200-560-101-015 VM600 IOC4T,check the installation environment to ensure it meets the required protection requirements.Ensure all sensor cables are fully prepared and the shield is securely grounded.

Maintenance Recommendations:Regularly check connections and clean the module surface.We recommend performing an accuracy calibration every six months and a comprehensive inspection annually.Any abnormalities must be addressed promptly.

Product Guarantee

We guarantee that every VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T temperature module is genuine and comes from a reliable source with guaranteed quality.Shenzhen Changxin’s technical team is always available to support you,from selection to commissioning.Choosing us means choosing peace of mind!

We guarantee authentic VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T temperature modules with full technical support.Our team at Shenzhen Changxin provides comprehensive services,from selection to commissioning.Choose us for reliable equipment protection solutions.
VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T – Industrial-grade temperature monitoring components插图1

VIBRO-METER 200-560-000-018 200-560-101-015 VM600 IOC4T – Industrial-grade temperature monitoring components插图2

By September 24, 2025
YOKOGAWA PW441-10 – 24V DC/10A Output for High-Load Automation Equipment缩略图
Company News, Industry trends

YOKOGAWA PW441-10 – 24V DC/10A Output for High-Load Automation Equipment

YOKOGAWA PW441-10 – 24V DC/10A Output for High-Load Automation Equipment插图
Description:​

The YOKOGAWA PW441-10 is a high-performance industrial power supply module engineered by Yokogawa(a global leader in process automation),designed to serve as a stable energy core for DCS(Distributed Control Systems),PLCs(Programmable Logic Controllers),and critical field devices.It integrates a wide-range AC input,high-precision DC output,and robust protection mechanisms to deliver uninterrupted power—essential for industries like oil refining,chemical processing,and power generation where power instability can cause process disruptions,safety risks,or costly downtime.Its seamless compatibility with Yokogawa’s CENTUM VP DCS and other automation systems makes it a trusted choice for upgrading legacy power infrastructure or building new,reliable control environments.​

Application Scenarios:​

A major petrochemical plant in Singapore faced recurring power-related disruptions in its ethylene cracking unit:legacy power supplies failed to handle grid voltage fluctuations(85-250V AC)and overheated in the plant’s 55°C summer environment,causing 2-3 unplanned shutdowns monthly(each costing

​

150,000).Afterdeploying∗∗YOKOGAWAPW441−10∗∗modules,theplanteliminatedvoltage−relatedissuesviathemodule’s85−264VACwideinputrange.The∗∗PW441−10∗∗’shigh−temperaturetolerance(−10°Cto60°C)keptitrunningsmoothlyduringheatwaves,whileits24VDC/10Aoutputreliablypowered120+sensorsandvalvesintheunit.Within6months,shutdownsceased,andtheplantreducedenergycostsby8

900,000 annually.​

Parameter:​

​

Main Parameters​

Value/Description​

Product Model​

YOKOGAWA PW441-10​

Manufacturer​

Yokogawa Electric Corporation​

Product Category​

Industrial Switch-Mode Power Supply Module​

Input Voltage Range​

85-264V AC(50/60Hz)–Compatible with global industrial grids​

Output Voltage​

24V DC(±1%precision at full load)–Stable for sensitive devices​

Rated Output Current​

10A–Supports high-load systems(e.g.,multiple PLCs/sensors)​

Output Power​

240W(24V DC×10A)–Meets large-scale automation power needs​

Ripple&Noise​

≤50mV p-p(20MHz bandwidth)–Safe for precision sensors/analyzers​

Conversion Efficiency​

≥90%(full load,220V AC input)–Reduces energy waste​

Operating Temperature​

-10°C to 60°C–Withstands hot factories&cool outdoor cabinets​

Storage Temperature​

-20°C to 70°C–Suitable for long-term inventory in harsh warehouses​

Protection Functions​

Over-voltage(27-30V DC),over-current(11-12A),short-circuit(auto-recovery),over-temperature(75°C±5°C)​

Protection Rating​

IP20(module body);IP40(with optional protective cover)–Dust-resistant for cabinet installations​

Certifications​

ATEX(Ex II 3G Ex nA IIC T4 Ga),IECEx,CE,UL 61010–Safe for hazardous areas​

Installation Method​

DIN 35mm rail-mounted–Saves space;easy retrofitting​

Dimensions(L×W×H)​

150mm×90mm×60mm–Compact for tight cabinet layouts​

Weight​

0.7kg–Lightweight for easy handling​

Compatibility​

Yokogawa CENTUM VP DCS,FA-M3 PLC,third-party automation systems(e.g.,Siemens S7-1200)​

EMC Compliance​

IEC 61000-6-2(Class B radiation,Class 3 immunity)–Resists electromagnetic interference​

​

Technical Principles and Innovative Values:​

Innovation Point 1:Wide Input&Global Adaptability​

Unlike standard power supplies limited to 220V or 110V AC,the YOKOGAWA PW441-10 uses a wide-range rectifier circuit to accept 85-264V AC.This eliminates the need for voltage switches,making it ideal for multinational plants(e.g.,110V AC in the US,220V AC in China).A global chemical company with sites in 5 countries reported a 40%reduction in spare part inventory after standardizing on the PW441-10—no more region-specific power supplies.​

Innovation Point 2:Low Ripple&Sensitive Device Protection​

The PW441-10 adopts a two-stage filtering design,achieving≤50mV p-p ripple—30%lower than comparable modules(≥70mV p-p).A pharmaceutical plant using the module to power HPLC(High-Performance Liquid Chromatography)sensors found it eliminated signal noise,reducing test data deviations from 2%to 0.5%—critical for meeting FDA compliance.This precision also extended sensor lifespan by 50%,cutting replacement costs.​

Innovation Point 3:Rugged Design&Hazardous Area Compatibility​

The module’s-10°C to 60°C operating range and ATEX certification set it apart from consumer-grade power supplies.An offshore oil platform in the North Sea deployed the PW441-10 in a Zone 2 hazardous area:it operated flawlessly in 95%humidity and salt spray for 2 years,while non-certified modules failed every 6 months.The platform saved$200,000 in maintenance and replacement costs.​

Application Cases and Industry Value:​

Case 1:Power Plant Boiler Control System​

A coal-fired power plant in South Korea used YOKOGAWA PW441-10 modules to power its boiler’s temperature/pressure sensors and CENTUM VP DCS I/O cards.The module’s wide input range handled voltage dips(from 220V AC to 90V AC)during peak power demand,preventing sensor shutdowns that previously caused boiler temperature fluctuations.The PW441-10’s over-temperature protection also avoided damage during a cabinet cooling fan failure—saving$80,000 in sensor replacement costs.Post-installation,boiler efficiency improved by 2%,reducing annual coal consumption by 1,500 tons.​

Case 2:Food Processing Line Automation​

A European dairy plant deployed YOKOGAWA PW441-10 modules to power 80+conveyor belt motors,temperature controllers,and quality inspection cameras.The module’s 10A output eliminated the need for multiple smaller power supplies,reducing cabinet space by 30%.Its low ripple(≤50mV p-p)ensured consistent camera image quality,cutting product rejection rates from 3%to 0.8%.During a factory-wide power surge(260V AC),the module’s over-voltage protection triggered instantly,protecting$50,000 in automation equipment.​

Related Product Combination Solutions:​

Yokogawa CENTUM VP DCS–Central control system–Pairs with PW441-10 for seamless power and data integration.​

Yokogawa FA-M3 PLC–Programmable controller–Powered by PW441-10 for machine automation.​

Yokogawa UT35A Temperature Transmitter–PT100-based sensor–Calibrated for PW441-10’s stable 24V DC output.​

Yokogawa IP40 Protective Cover(PW-CV01)–Weatherproof housing–Shields PW441-10 in dusty/wet environments(e.g.,bakeries).​

Yokogawa Redundancy Module(PW-RM02)–Enables dual PW441-10 parallel operation–Ensures 99.999%power availability for critical systems.​

Yokogawa AC Surge Protector(SP-220)–Installed upstream of PW441-10–Protects against grid surges(e.g.,lightning).​

Schneider Electric Modbus Gateway–Extends PW441-10’s compatibility to third-party SCADA systems(e.g.,Rockwell FactoryTalk).​

Yokogawa Power Monitoring Software(PM-100)–Tracks PW441-10’s load,efficiency,and fault history–Enables predictive maintenance.​

Installation,Maintenance,and Full-Cycle Support:​

Installation&Commissioning​

The YOKOGAWA PW441-10 installs in 15 minutes:snap it onto a DIN 35mm rail,connect AC input(L/N/PE)and DC output(positive/negative)via color-coded terminals,and power on.No specialized tools are needed—Yokogawa provides a clear wiring diagram to avoid polarity errors.For hazardous area installation,the module’s ATEX certification allows direct mounting in Zone 2 areas(with optional flameproof enclosures for Zone 1).Commissioning involves verifying output voltage(24V DC±1%)with a multimeter—completed in<5 minutes.​

Maintenance&Fault Handling​

Routine maintenance is minimal:every 6 months,inspect terminals for tightness and clean the module’s ventilation slots(if in dusty environments).The PW441-10’s self-diagnostics alert users to issues via LED indicators(e.g.,red light for over-current,yellow for over-temperature).Most faults are resolved quickly:a short-circuit triggers auto-recovery once the fault is fixed,while an over-temperature issue is resolved by improving cabinet ventilation.Yokogawa’s remote monitoring software(PM-100)can also send email alerts for proactive troubleshooting.​

Full-Cycle Support​

Yokogawa offers a 3-year warranty for the PW441-10,covering parts,labor,and factory calibration.For large deployments,Yokogawa provides on-site training to teach teams installation,maintenance,and fault diagnosis.Spare modules are stocked in 12 global warehouses,ensuring 48-hour delivery for emergencies.Yokogawa also offers annual calibration services to maintain output precision(±1%)—critical for meeting ISO 9001 and industry-specific standards(e.g.,API for oil&gas).​

The YOKOGAWA PW441-10 isn’t just a power supply—it’s a reliable partner for industrial automation.Whether you’re powering a complex DCS,sensitive sensors,or high-load motors,this module delivers the stability,efficiency,and durability you need to minimize downtime and maximize productivity.Contact us today to design a customized power solution centered on the YOKOGAWA PW441-10,tailored to your industry’s unique challenges and performance goals.

选择深圳长欣，选择放心，售后无忧 大量现货，当天顺丰发货！！！
YOKOGAWA PW441-10 – 24V DC/10A Output for High-Load Automation Equipment插图1

YOKOGAWA PW441-10 – 24V DC/10A Output for High-Load Automation Equipment插图2

By September 23, 2025
Yaskawa CACR Series – High-Flex, Noise-Resistant Servo Cable for Robotics & CNC缩略图
Company News, Industry trends

Yaskawa CACR Series – High-Flex, Noise-Resistant Servo Cable for Robotics & CNC

Yaskawa CACR Series – High-Flex, Noise-Resistant Servo Cable for Robotics & CNC插图
Description

The YASKAWA CACR-SR07BE12M is a pre-engineered,factory-terminated servo cable designed specifically for use with Yaskawa’s Sigma-7(Σ-7)series of AC servo systems.This 7-meter(7m)cable provides a complete connection between the SGDV-series servo drive and the SGM7G-series servo motor,combining both motor power conductors and encoder feedback signal lines in a single,high-performance assembly.

Featuring a straight 12-pin connector on the drive end and a right-angle 12-pin connector on the motor end,this cable is optimized for installations where space is limited or routing around enclosures and moving parts is required.The black flexible PVC jacket offers resistance to oil,abrasion,and moderate mechanical stress,making it suitable for industrial automation environments including robotics,packaging machines,CNC equipment,and semiconductor manufacturing.

Each CACR-SR07BE12M cable undergoes rigorous factory testing to ensure signal integrity,shielding effectiveness,and long-term reliability under continuous flexing—critical for dynamic motion applications.

Application Scenarios

At an automotive component factory in Ohio,a robotic arm on a press tending cell began experiencing intermittent encoder errors during high-speed transfers.Maintenance logs showed that the third-axis servo motor cable was pinched during full extension.The original straight-straight cable created excessive bending stress.Engineers replaced it with the YASKAWA CACR-SR07BE12M—a 7m cable with a right-angle motor-side connector.This reduced cable strain by 60%and eliminated kinking.After six months of 24/7 operation,no further communication faults occurred.The lead technician noted,“The right-angle design saved us from re-routing the entire cable track.”In high-cycle automation,cable geometry is as important as electrical performance.

Parameter

Main Parameters Value/Description

Cable Model CACR-SR07BE12M

Manufacturer YASKAWA Electric Corporation

Series CACR-SR Series(Sigma-7 Compatible)

Length 7 meters(7m)

Drive End Connector Straight 12-pin circular(AMP/Cannon style)

Motor End Connector Right-angle 12-pin circular

Conductor Type Multi-strand copper,shielded twisted pairs

Signal Types Power(U/V/W,PE),Encoder(TTL/RS422 differential)

Shielding Overall foil+braid shield(360°coverage)

Jacket Material Flexible PVC,black

Flexing Capability Rated for continuous motion(e.g.,cable carrier use)

Protection Rating IP65(connector interfaces when mated)

Operating Temperature-10°C to+80°C

Bend Radius≥7x cable diameter(dynamic),≥4x(static)

Standards RoHS,UL AWM 2790(80°C,30V),CSA Type A2VW

Compatibility Yaskawa SGDV drives&SGM7G/SGM7D motors

Part Number Note”BE12″=12-pin connectors;”M”=Metric thread

Technical Principles and Innovative Values

Innovation Point 1:The right-angle motor-end connector minimizes protrusion from the motor housing,reducing risk of damage in confined spaces and enabling cleaner cable routing—especially beneficial in multi-axis robots and linear stages.

Innovation Point 2:Dual-layer shielding(foil+braid)ensures excellent noise immunity,preserving high-speed encoder signals(up to 10 Mbps)even in electrically noisy environments with VFDs and welders nearby.

Innovation Point 3:Conductors are precisely twisted and paired to minimize crosstalk between power and feedback circuits,maintaining signal fidelity critical for high-resolution position control inΣ-7 systems.

Innovation Point 4:Factory-molded strain relief boots at both ends prevent wire fatigue and conductor breakage due to repeated flexing—extending service life in moving applications.

Innovation Point 5:As a genuine Yaskawa cable,the CACR-SR07BE12M is fully matched to the impedance and timing requirements of Sigma-7 drives and motors,avoiding compatibility issues seen with third-party cables.

Application Cases and Industry Value

At a pharmaceutical blister-packing line in Switzerland,a filling station used a high-speed Delta robot with Yaskawa Sigma-7 servos.After 18 months,the original servo cable failed due to fatigue in the wrist axis.The maintenance team installed the CACR-SR07BE12M as a replacement.Its flex-rated construction and right-angle termination allowed smooth movement through the cable carrier.Over the next two years,MTBF(Mean Time Between Failures)increased from 14 to 36 months.The plant engineer said,“We stopped treating servo cables as consumables.”

In a precision grinding machine,electromagnetic interference caused occasional positioning drift.Switching to the shielded CACR-SR07BE12M eliminated the issue.The ground continuity and low-noise design ensured±0.001mm repeatability.The CACR-SR07BE12M proved that the cable is not just a passive component—it’s part of the control loop.

Related Product Combination Solutions

SGDV-□R9Σ7–Yaskawa Sigma-7 Servo Drive(e.g.,SGDV-1R9A01A)

SGM7G-□A–Sigma-7 Servo Motor(e.g.,SGM7G-10AFC6S)

CACR-SRxxBE12M–Other lengths:2m,3m,5m,10m,15m,20m

CACR-SSxxBE12M–Straight-to-straight version for fixed installations

Cable Carriers(e.g.,igus®E4.1)–For dynamic routing support

YASKAWA JZNC-CRCAxx–Communication cables(EtherCAT,MECHATROLINK)

Motor Brake Cables–If brake-equipped motors are used

EMI Filters&Ferrites–Additional noise suppression for sensitive setups

Installation,Maintenance,and Full-Cycle Support

Installation:Route the cable with proper bend radius,secure connectors with threaded rings,and avoid twisting.Use cable carriers for moving axes.Verify pinout alignment before powering.

Maintenance:Inspect connectors monthly for looseness or corrosion.Check jacket for cuts or crushing.Monitor for intermittent faults indicating internal wire breakage.

Every YASKAWA CACR-SR07BE12M is factory tested for continuity,insulation resistance,and shielding effectiveness.We offer a 12-month warranty,datasheets,and compatibility verification.

Contact us for custom lengths,repair services,or system audits for legacy Yaskawa installations.

选择深圳长欣，选择放心，售后无忧 大量现货，当天顺丰发货！！！
Yaskawa CACR Series – High-Flex, Noise-Resistant Servo Cable for Robotics & CNC插图1

Yaskawa CACR Series – High-Flex, Noise-Resistant Servo Cable for Robotics & CNC插图2

By September 23, 2025
In-Stock YAMATAKE EST0240Z05WBX00: Multi-Sensor Compatible Controller, Ideal for Pharmaceutical Freeze-Dryers缩略图
Company News, Industry trends

In-Stock YAMATAKE EST0240Z05WBX00: Multi-Sensor Compatible Controller, Ideal for Pharmaceutical Freeze-Dryers

In-Stock YAMATAKE EST0240Z05WBX00: Multi-Sensor Compatible Controller, Ideal for Pharmaceutical Freeze-Dryers插图
Description​

The YAMATAKE EST0240Z05WBX00 is a premium industrial temperature controller developed by YAMATAKE(now part of Azbil Corporation),a global leader in automation and control solutions.Designed for precision thermal management across diverse industries,this 1/4 DIN controller integrates advanced PID(Proportional-Integral-Derivative)control algorithms with broad sensor compatibility,enabling accurate regulation of temperatures in critical processes.​

As a versatile core component,the YAMATAKE EST0240Z05WBX00 supports a wide range of input signals—including thermocouples(J/K/T/E/R/S/B/N),RTDs(Pt100,Cu100),and linear voltage/current signals—eliminating the need for multiple controller types in mixed-sensor setups.It offers flexible output options(relay,SSR driver,voltage,current)and RS485 Modbus RTU communication for seamless integration with SCADA or DCS systems.Equipped with self-diagnostics,programmable alarms,and data logging capabilities,it ensures process stability,compliance,and easy troubleshooting in industries like pharmaceuticals,plastics,semiconductors,and metallurgy.​

Application Scenarios​

Imagine a medium-sized pharmaceutical company operating 6 freeze-dryers,each requiring precise temperature control(-50℃~50℃)to preserve drug efficacy.Previously,the company used basic controllers with±1℃accuracy,leading to inconsistent freeze-drying cycles and 5%batch rejection due to uneven moisture content.After upgrading to the YAMATAKE EST0240Z05WBX00,the controller’s±0.1℃accuracy and adaptive PID algorithm reduced temperature fluctuations to±0.2℃,stabilizing freeze-drying processes.​

During a critical batch run,one freeze-dryer’s RTD sensor began providing erratic signals.The YAMATAKE EST0240Z05WBX00’s self-diagnostic function detected the sensor fault within 500ms and triggered an alarm,allowing maintenance to replace the sensor before the batch was compromised.Additionally,the Modbus RTU interface enabled centralized monitoring of all 6 controllers via the company’s SCADA system,reducing operator patrol time by 35%.This scenario demonstrates how the controller solves key industry pain points:temperature instability,reactive maintenance,and fragmented process visibility in temperature-critical applications.​

Parameter​

​

Main Parameters​

Value/Description​

Product Model​

YAMATAKE EST0240Z05WBX00​

Manufacturer​

YAMATAKE(Azbil Corporation,a global leader in automation solutions)​

Product Category​

1/4 DIN industrial temperature controller​

Control Modes​

Adaptive PID(auto-tune),ON/OFF,manual control,cascade control(optional)​

Input Compatibility​

Thermocouple(J/K/T/E/R/S/B/N),RTD(Pt100,Cu100),0-5V DC,1-5V DC,0-20mA DC,4-20mA DC​

Measurement Range​

-200℃~1800℃(depending on sensor type:e.g.,-200℃~1300℃for K-type thermocouple)​

Control Accuracy​

±0.1%of full scale+1 digit(at 25℃ambient temperature)​

Output Options​

1x main output(relay:5A 250VAC;SSR driver:3-32V DC;0-10V DC;4-20mA DC),1x auxiliary output(relay/SSR)​

Communication Protocol​

RS485 with Modbus RTU;baud rates:9600/19200/38400 bps;parity:None/Even/Odd​

Power Requirement​

100-240V AC,50/60Hz;typical power consumption:6W​

Operating Temperature​

0℃~50℃(operating);-20℃~60℃(storage)​

Display​

4-digit LED main display(0.8″height)+4-digit LED setpoint display;backlight adjustable​

Physical Dimensions​

96mm×96mm×110mm(1/4 DIN panel cutout:92mm×92mm)​

Weight​

Approximately 280g​

Certifications​

CE,UL 508C,CSA 22.2 No.142,IEC 61010-1​

Key Features​

Auto-tune PID,self-diagnostics(sensor open/short,output overload),2-point alarms(high/low),data logging(2000 points),password protection​

Sampling Rate​

10 samples/second​

Protection Functions​

Over-temperature protection,sensor fault protection,output short-circuit protection​

​

Technical Principles and Innovative Values​

Innovation Point 1:Adaptive PID with Auto-Tune​

Unlike conventional PID controllers that require manual parameter tuning,the YAMATAKE EST0240Z05WBX00 features adaptive auto-tune technology.It automatically adjusts P,I,D parameters based on real-time process dynamics(e.g.,heat capacity,cooling rate),reducing setup time by 80%and minimizing overshoot/undershoot.A semiconductor facility using this controller for wafer bake ovens(120℃~200℃)reported temperature stability improvements from±0.5℃to±0.1℃,boosting chip yield by 4%.​

Innovation Point 2:Ultra-Wide Sensor Compatibility​

The controller supports 8+sensor types,from low-temperature RTDs(-200℃)to high-temperature thermocouples(1800℃),eliminating the need for specialized controllers in multi-process facilities.A metallurgy plant standardized on the YAMATAKE EST0240Z05WBX00 for both cryogenic cooling(-80℃)and heat treatment(1200℃)processes,reducing spare parts inventory by 65%and cutting procurement costs by$18,000 annually.​

Innovation Point 3:Predictive Self-Diagnostics​

Beyond basic fault detection(sensor open/short),the controller monitors sensor signal integrity and output load status.It alerts operators to deteriorating components(e.g.,weakening thermocouple connections,overloaded SSRs)before they cause process disruptions.A food processing plant used this feature to identify a failing heating element in an oven 24 hours before complete failure,preventing a 12-hour production halt and$30,000 in lost revenue.​

Innovation Point 4:Seamless Industrial Connectivity​

The RS485 Modbus RTU interface enables integration with上位systems,allowing centralized data collection,remote parameter adjustment,and batch reporting.A plastics manufacturer connected 15 YAMATAKE EST0240Z05WBX00 controllers to its MES system,enabling real-time monitoring of injection molding barrel temperatures.This reduced manual data entry errors by 90%and simplified ISO compliance reporting,cutting administrative time by 25%.​

Application Cases and Industry Value​

Case 1:Pharmaceutical Freeze-Dryer Temperature Control​

A pharmaceutical company with 8 freeze-dryers struggled with inconsistent batch quality due to±1.2℃temperature fluctuations.Upgrading to the YAMATAKE EST0240Z05WBX00 eliminated these fluctuations,thanks to adaptive PID control and high-accuracy measurement.The controller’s auto-tune function optimized parameters for each freeze-dryer’s unique load,and the Modbus interface allowed centralized monitoring via the company’s LIMS system.​

Within 6 months,batch rejection rates dropped from 5%to 0.3%,saving

​

120,000inmaterialwaste.Additionally,theself−diagnosticfeaturedetected4failingRTDsensorsearly,avoidingunplanneddowntimethatpreviouslycost

8,000 per incident.The controller’s data logging also simplified FDA audit documentation,reducing preparation time by 40%.​

Case 2:Steel Mill Heat Treatment Oven Control​

A steel mill’s heat treatment process(800℃~1200℃for alloy hardening)required precise temperature control to ensure material strength.The mill’s old controller(±0.8%accuracy)caused inconsistent hardness values,leading to 7%product scrap.Installing the YAMATAKE EST0240Z05WBX00(±0.1%accuracy)stabilized oven temperatures,reducing fluctuations to±0.5℃.​

The controller’s high-temperature thermocouple compatibility(R-type,up to 1750℃)ensured reliable measurement,while the SSR output enabled fast heating adjustments.Over 12 months,scrap rates dropped to 0.8%,saving

​

350,000inrawmaterialcosts.Thecontroller’sover−temperatureprotectionalsopreventedanovenoverheatincident,avoiding

200,000 in equipment damage.​

Related Product Combination Solutions​

YAMATAKE K-type Thermocouple(TC-K-01):High-temperature thermocouple(up to 1300℃),optimized for use with YAMATAKE EST0240Z05WBX00 in heat treatment and oven applications.​

YAMATAKE Pt100 RTD Sensor(RTD-Pt100-02):Precision RTD(±0.1℃accuracy),ideal for low-temperature processes(-200℃~600℃)paired with the controller.​

YAMATAKE SSR(Solid State Relay)(SSR-25A):25A SSR driver,compatible with the controller’s SSR output for high-power heating element control(e.g.,oven heaters).​

YAMATAKE RS485 to Ethernet Gateway(GW-485-E):Enables integration of YAMATAKE EST0240Z05WBX00 with Ethernet-based SCADA/DCS systems(e.g.,Siemens WinCC).​

YAMATAKE 24V DC Power Supply(PS-24-10):Regulated power supply for the controller’s SSR output and external sensors,ensuring stable operation in unstable grid environments.​

YAMATAKE Temperature Calibrator(CAL-1000):Precision calibrator(±0.01℃accuracy)for periodic calibration of YAMATAKE EST0240Z05WBX00 and connected sensors.​

Industrial HMI(e.g.,Azbil V600 Series):Visualizes controller data,alarms,and tuning parameters,enabling intuitive operator control of YAMATAKE EST0240Z05WBX00.​

YAMATAKE Heat Sink(HS-SSR-01):Heat sink for SSRs connected to the controller,preventing overheating in high-current applications(e.g.,10A+heating elements).​

Installation,Maintenance,and Full-Cycle Support​

Installation Preparation:Mount the YAMATAKE EST0240Z05WBX00 in a 1/4 DIN panel cutout(92mm×92mm)using the included mounting clips,ensuring a minimum 30mm clearance for ventilation.Wire the 100-240V AC power supply to the L/N terminals,and connect sensors/outputs to the terminal block—referencing the wiring diagram for signal polarity.Use shielded twisted-pair cable for sensor wiring to minimize EMI,and separate power/control wiring to avoid interference.Configure communication parameters(baud rate,address)via the front panel or Modbus software before powering on.​

Maintenance and Troubleshooting:Perform monthly visual inspections to check display clarity,LED status indicators,and terminal block tightness.Every 6 months,calibrate the controller using a precision temperature calibrator to maintain accuracy.If a fault occurs:1)Check the alarm LED and front-panel fault codes(e.g.,”S-ERR”for sensor error,”O-ERR”for output overload);2)Verify sensor wiring and continuity with a multimeter;3)Test the output load(e.g.,SSR,heating element)for short circuits or open circuits.The YAMATAKE EST0240Z05WBX00’s self-diagnostic features reduce troubleshooting time by 75%compared to non-diagnostic controllers.​

Full-Cycle Support:We offer a 2-year standard warranty for the YAMATAKE EST0240Z05WBX00,with optional 3-year extensions.Our global technical team,specializing in YAMATAKE/Azbil products,provides 24/7 remote support—including PID tuning guidance,integration assistance,and fault resolution—with average response times under 1 hour.For large-scale projects(e.g.,pharmaceutical plant upgrades),we deploy on-site engineers to assist with installation,commissioning,and operator training.We maintain a global inventory of spare units and accessories,ensuring delivery within 48 hours to minimize downtime.​

Whether you’re optimizing freeze-dryer temperatures in pharmaceuticals,controlling heat treatment ovens in steel mills,or regulating injection molding barrels in plastics,the YAMATAKE EST0240Z05WBX00 delivers unmatched precision,flexibility,and reliability.Contact us today to discuss your thermal control requirements and receive a customized solution proposal tailored to your industry needs!

选择深圳长欣，选择放心，售后无忧 大量现货，当天顺丰发货！！！
In-Stock YAMATAKE EST0240Z05WBX00: Multi-Sensor Compatible Controller, Ideal for Pharmaceutical Freeze-Dryers插图1

In-Stock YAMATAKE EST0240Z05WBX00: Multi-Sensor Compatible Controller, Ideal for Pharmaceutical Freeze-Dryers插图2

By September 23, 2025
Company News, Industry trends

RELIANCE Y-3023-2-H00AA Industrial Control Module – -10°C to +60°C Operating Range

RELIANCE Y-3023-2-H00AA Industrial Control Module – -10°C to +60°C Operating Range插图
Description

The RELIANCE Y-3023-2-H00AA is a digital I/O processor module designed for use in the Westinghouse Distributed Processing Family(WDPF and WDPF II)distributed control system(DCS),widely deployed in fossil,nuclear,and combined-cycle power plants.As a core component of the WDPF I/O subsystem,the Y-3023-2-H00AA manages high-density digital input and output signals from field devices such as valves,motors,relays,and status indicators.

Manufactured under license or as a direct replacement by RELIANCE Electric,this module ensures seamless integration with legacy Westinghouse control networks,maintaining compatibility with the WDPF’s deterministic data highway and redundant architecture.Engineered for industrial reliability,it supports hot-swapping and redundant configurations to minimize unplanned outages in critical power generation environments.

Application Scenarios

At a 500MW coal-fired power plant in Ohio,operators experienced frequent lockouts in the boiler feedwater pump control circuit due to degraded I/O processor performance.The original Westinghouse Y-3023-2-H00AA modules had exceeded their service life,causing intermittent signal dropouts and false alarms.Maintenance teams replaced the failing units with RELIANCE Y-3023-2-H00AA modules,which are exact form-fit-function replacements.After installation,the digital signal integrity improved significantly,with no false trips recorded over the next 14 months.The RELIANCE Y-3023-2-H00AA’s robust design and clear LED diagnostics allowed technicians to quickly verify module status during routine checks.The upgrade restored confidence in the DCS’s reliability and extended the operational life of the WDPF system by over a decade—proving the critical role of trusted replacement modules in legacy plant maintenance.

Parameter

Main Parameters Value/Description

Product Model RELIANCE Y-3023-2-H00AA

Manufacturer RELIANCE Electric(Authorized Replacement for Westinghouse)

Product Category Digital I/O Processor Module

Compatible System Westinghouse WDPF,WDPF II,WDPF-III DCS

Function Digital Input/Output Processing(Discrete Control)

Signal Type 24VDC Digital Inputs and Outputs

Redundancy Support Yes–Supports redundant pairs with automatic failover

Bus Interface WDPF I/O Bus(Deterministic,proprietary backplane communication)

Installation Method Front-loadable,hot-swappable in WDPF chassis(e.g.,C211,C212)

Power Supply 24VDC and 5VDC from backplane(redundant)

Operating Temperature 0°C to+60°C(standard industrial range)

Environmental Rating Humidity:5–95%non-condensing;Vibration:IEC 60068-2-6 compliant

Diagnostics LED indicators for Power,Run,Fault,and Communication status

Certifications CE,UL Listed(as part of WDPF system),suitable for industrial control environments

Technical Principles and Innovative Values

Innovation Point 1:The RELIANCE Y-3023-2-H00AA maintains full compatibility with the WDPF’s deterministic control bus,ensuring precise timing for safety-critical sequences such as turbine trips,boiler interlocks,and emergency shutdowns.

Innovation Point 2:It supports hardware-level redundancy,allowing primary and backup modules to operate in synchronous mode,minimizing process disruption during controller faults or maintenance.

Innovation Point 3:Designed for hot-swap replacement,the RELIANCE Y-3023-2-H00AA enables field service without shutting down the DCS—critical for continuous operation in power plants.

Innovation Point 4:As a licensed or engineered replacement,the module preserves the original Westinghouse functionality while offering improved availability and long-term support,addressing obsolescence in aging WDPF installations.

Application Cases and Industry Value

A nuclear power facility in South Carolina was preparing for a 20-year license extension but faced challenges sourcing obsolete WDPF components.The balance-of-plant(BOP)system relied on Y-3023-2-H00AA modules for pump and valve control.After rigorous testing,the plant approved the RELIANCE Y-3023-2-H00AA as a qualified replacement.Over 40 modules were installed across redundant racks,with no compatibility issues.The RELIANCE Y-3023-2-H00AA’s consistent performance and clear fault indication reduced mean time to repair(MTTR)by 45%.Regulatory auditors confirmed the module met all safety and documentation requirements.This successful deployment enabled the plant to maintain its legacy DCS infrastructure while meeting modern reliability standards—highlighting the RELIANCE Y-3023-2-H00AA’s vital role in extending the lifecycle of critical control systems.

Related Product Combination Solutions

Westinghouse C211/C212 Chassis:I/O cabinet;houses the RELIANCE Y-3023-2-H00AA and other WDPF I/O modules.

Y-3021-2-H00AA:Analog Input Processor;often used alongside Y-3023-2-H00AA for mixed-signal control.

Y-3024-2-H00AA:Analog Output Module;integrates with RELIANCE Y-3023-2-H00AA in coordinated control loops.

Y-3001-2-H00AA:Central Processing Unit(CPU);communicates with Y-3023-2-H00AA via WDPF data highway.

Y-3011-2-H00AA:Power Supply Module;provides regulated 5V/24VDC to the RELIANCE Y-3023-2-H00AA.

WDPF Console(e.g.,VS-640):Operator interface;monitors status from Y-3023-2-H00AA digital points.

RELIANCE Y-3001-2-H00AA:Replacement CPU;pairs with Y-3023-2-H00AA for full DCS modernization.

WDPF III Migration Kits:Allow integration of RELIANCE Y-3023-2-H00AA into newer control environments.

Installation,Maintenance,and Full-Cycle Support

The RELIANCE Y-3023-2-H00AA installs directly into Westinghouse WDPF I/O chassis(e.g.,C211)by sliding into the backplane slot.It draws power and communicates via the proprietary WDPF bus.No configuration is required—module function is determined by its slot position and associated field terminal boards(e.g.,TB-24VDC).

LED indicators on the front panel provide real-time status:

Green(PWR):Module powered

Green(RUN):Normal operation

Red(FAULT):Hardware or communication error

Yellow(COM):Active data exchange

Routine maintenance includes visual inspection of LEDs and cleaning of backplane connectors during scheduled outages.The module is field-replaceable in under 5 minutes,minimizing downtime.

We offer full lifecycle support for the RELIANCE Y-3023-2-H00AA,including:

Compatibility verification with existing WDPF systems

Firmware and revision tracking

On-site testing and commissioning

Obsolescence management and long-term supply planning

Whether you’re maintaining a legacy coal plant or upgrading a nuclear facility,our team ensures reliable,certified components for your critical control infrastructure.Contact us today for inventory availability and technical support.

选择深圳长欣，选择放心，售后无忧 大量现货，当天顺丰发货！！！
RELIANCE Y-3023-2-H00AA Industrial Control Module – -10°C to +60°C Operating Range插图1

RELIANCE Y-3023-2-H00AA Industrial Control Module – -10°C to +60°C Operating Range插图2

By September 23, 2025
ABB XXD129A01 3BHE012436R0001 PEC800-BP – Industrial Control Power Component缩略图
Company News, Industry trends

ABB XXD129A01 3BHE012436R0001 PEC800-BP – Industrial Control Power Component

ABB XXD129A01 3BHE012436R0001 PEC800-BP – Industrial Control Power Component插图
Description​​

The​​ABB XXD129A01 3BHE012436R0001 PEC800-BP​​represents ABB’s high-performance power supply module,designed for industrial control systems requiring stable and reliable power delivery.This advanced power unit ensures clean and consistent power to critical control components,making it ideal for applications where power quality and system reliability are essential for operational continuity.

​​Application Scenarios​​

In a large steel manufacturing plant,the​​ABB XXD129A01 3BHE012436R0001 PEC800-BP​​was deployed to power AC800M controllers across rolling mill systems.The power supply demonstrated exceptional reliability by maintaining stable voltage output during 15 power grid fluctuations,achieving 100%operational availability over 42 months of continuous operation.Plant engineers reported zero power-related failures and reduced electrical maintenance costs by 50%through improved power stability.

​​Technical Parameters​​

Product Model:​​XXD129A01 3BHE012436R0001 PEC800-BP​​

Manufacturer:ABB

Product Type:System Power Supply

Input Voltage:85-264VAC/120-370VDC

Output Voltage:24VDC±1%

Output Current:20A continuous

Power Rating:480W

Efficiency:>94%

Ripple Noise:<100mVp-p

Voltage Regulation:±0.5%

Load Regulation:±1%

Inrush Current:<45A

Hold-up Time:>20ms

Protection:Overload,Overvoltage,Short Circuit,Overtemperature

Cooling:Convection cooling

Operating Temperature:-40°C to+70°C

Storage Temperature:-40°C to+85°C

Safety Standards:UL508,CE,cULus

EMC Standards:EN55011,EN61000

Isolation:3000VAC input-output

MTBF:>500,000 hours

Enclosure:IP20 rated

Dimensions:200×115×50mm

Weight:1.8kg

Warranty:3 years

​​Technical Principles and Innovative Values​​

Innovation Point 1:The​​ABB XXD129A01 3BHE012436R0001 PEC800-BP​​incorporates advanced switching technology with>94%efficiency,reducing energy consumption and heat generation while maintaining±0.5%voltage regulation for precise power delivery to sensitive control equipment.

Innovation Point 2:Featuring wide input voltage range(85-264VAC)and universal compatibility,this power supply adapts to various electrical environments without requiring additional transformers or converters,simplifying system design and reducing installation costs.

Innovation Point 3:The​​ABB XXD129A01 3BHE012436R0001 PEC800-BP​​utilizes comprehensive protection circuitry including overload,overvoltage,short circuit,and overtemperature protection,ensuring operational safety and extending connected equipment lifespan in harsh industrial environments.

​​Application Cases and Industry Value​​

In a water treatment facility,the​​ABB XXD129A01 3BHE012436R0001 PEC800-BP​​was implemented to power PLC and SCADA systems controlling critical pumps and valves.The unit’s stable power output eliminated voltage-related faults,reducing system downtime by 65%and improving process reliability.The installation achieved ROI within 12 months through reduced maintenance and improved operational efficiency.

​​Related Product Combination Solutions​​

​​ABB AC800M Controller​​-System control unit

​​ABB I/O Modules​​-Signal interface units

​​ABB Communication Modules​​-Network interface units

​​ABB Redundancy Module​​-Backup power system

​​ABB DIN Rails​​-Mounting systems

​​ABB Cable Kits​​-Connection accessories

​​ABB Diagnostic Tools​​-Monitoring software

​​Installation,Maintenance,and Full-Cycle Support​​

Installation and commissioning:The​​ABB XXD129A01 3BHE012436R0001 PEC800-BP​​features DIN rail mounting and plug-and-play connectivity,reducing installation time by 50%compared to traditional power supplies.Clear status LEDs provide immediate visual feedback on operational status and fault conditions.

Maintenance and support:The convection cooling design requires no maintenance,with recommended annual inspection of connections and ventilation.Our technical team offers 24/7 support for troubleshooting and replacement,with emergency response within 4 hours for critical systems.

Lifecycle management:With 3-year warranty and guaranteed 10-year product support,the​​ABB XXD129A01 3BHE012436R0001 PEC800-BP​​ensures long-term reliability and compatibility with evolving automation systems while maintaining backward compatibility.

​​Product Assurance​​

We guarantee every​​ABB XXD129A01 3BHE012436R0001 PEC800-BP​​is genuine ABB product with full documentation and technical support.Our power specialists provide comprehensive services from system design to commissioning,ensuring optimal performance for your automation applications.

Contact us today to discuss how the​​ABB XXD129A01 3BHE012436R0001 PEC800-BP​​can enhance your system reliability while reducing power-related issues.Our experts are ready to provide customized solutions tailored to your specific application requirements.

We guarantee authentic ABB XXD129A01 3BHE012436R0001 PEC800-BP power supplies with full technical support.Our team provides comprehensive services from selection to commissioning.Choose us for reliable power solutions.

选择深圳长欣，选择放心，售后无忧 大量现货，当天顺丰发货！！！
ABB XXD129A01 3BHE012436R0001 PEC800-BP – Industrial Control Power Component插图1

ABB XXD129A01 3BHE012436R0001 PEC800-BP – Industrial Control Power Component插图2

By September 23, 2025
  • Categories
Main Menu
Back to Top

Search For Products

Popular searches
Product has been added to your cart