
Product Overview
The ABB BCU06-ETH C3 (ordering code 1SAP140100R1170) is a compact central processing unit (CPU) from ABB’s renowned AC500 programmable logic controller platform. Designed as a versatile control brain for small to mid-sized automation projects, this 32-bit processor combines 256 KB of user program memory, native 10/100 Mbps Ethernet connectivity, and dual configurable RS232/RS485 serial interfaces within a single DIN-rail-mounted module. It occupies a strategic position in the AC500 family — offering substantially more communication flexibility and processing power than a micro-PLC, while remaining far more economical and space-efficient than a full-size rack-based controller.What sets the ABB BCU06-ETH C3 apart is its integrated front-panel LCD display with dedicated RUN, DIAG, CFG, and VAL keys, allowing technicians to perform local commissioning, monitor I/O status, and diagnose faults without a connected laptop or engineering workstation. This makes it exceptionally well-suited to distributed installations such as pump stations, remote skids, and cabinet-mounted systems where on-site diagnostics must be fast and self-sufficient. The module also features a FieldBusPlug (FBP) interface for optional fieldbus modules, an SD card slot for program backup and firmware updates, and support for up to 10 local S500 I/O modules — delivering a genuinely complete control solution in a footprint of just a few centimeters.Whether deployed as a stand-alone controller, a CS31 system-bus master, or a remote processor within a larger distributed architecture, the ABB BCU06-ETH C3 offers the protocol breadth, diagnostic depth, and industrial ruggedness that define ABB’s automation heritage. It is programmed using IEC 61131-3 compliant engineering tools (Control Builder AC500 / Automation Builder), supporting LD, FBD, IL, ST, SFC, and CFC — ensuring code portability and long-term maintainability across the AC500 ecosystem.
Technical Specifications
| Parameter Name | Parameter Value |
|---|---|
| Product Model | BCU06-ETH C3 (1SAP140100R1170) |
| Manufacturer | ABB |
| Product Type | PLC Central Processing Unit (CPU) |
| Processor | 32-bit high-performance processor |
| User Program Memory | 256 KB |
| Ethernet Interface | 1 × RJ45, 10/100 Mbps, Modbus TCP |
| Serial Interfaces | 2 × RS232/RS485 (switchable), Modbus RTU / ASCII |
| Fieldbus Interface | FBP (FieldBus Plug) slave interface, optional bus modules |
| Onboard I/O | 4 DI, 2 DO, 1 AI |
| Local I/O Expansion | Up to 10 S500 I/O modules |
| Storage Expansion | SD card slot (ABB MC502 card) for program backup & firmware |
| Supply Voltage | 24 VDC (±10%) |
| Programming Standard | IEC 61131-3 (LD, FBD, IL, ST, SFC, CFC) |
| Operating Temperature | +5 °C to +55 °C (typical) |
| Protection Rating | IP20 |
| Mounting | DIN rail |
Main Features and Advantages
Integrated Ethernet as Standard, Not an OptionUnlike many compact controllers of its generation that require a separate communication card for network connectivity, the ABB BCU06-ETH C3 carries a native 10/100 Mbps Ethernet port directly on the CPU. This allows the controller to join a plant-wide SCADA or HMI backbone over Modbus TCP without an external gateway — reducing panel space, wiring complexity, and the number of potential single points of failure. For brownfield retrofit projects, this single feature can eliminate an entire communication submodule and its associated licensing cost.Dual Serial Ports for Mixed-Protocol EnvironmentsThe two independently configurable RS232/RS485 ports on the ABB BCU06-ETH C3 enable simultaneous communication with legacy devices using Modbus RTU, ASCII, or ABB’s CS31 protocol. A single CPU can therefore serve Modbus TCP to a SCADA system, Modbus RTU to a variable frequency drive, and ASCII to a weight indicator or alarm printer — all without external protocol converters. This flexibility is invaluable in plants where old and new equipment must coexist on the same control platform.Onboard LCD Display for Laptop-Free DiagnosticsThe front-panel LCD with RUN, DIAG, CFG, and VAL keys transforms the ABB BCU06-ETH C3 into a self-diagnosing controller. Technicians can view run status, read error codes, inspect I/O values, and adjust basic parameters directly from the module faceplate. In distributed installations, this reduces mean time to diagnosis from hours — accounting for travel and laptop setup — to mere minutes at the panel. The integrated web server further extends this capability, offering live I/O, task load, and Ethernet statistics through any standard browser.SD Card Program Recovery Minimizes DowntimeProgram and configuration data can be stored on an SD card inserted into the ABB BCU06-ETH C3. When a CPU fails in the field, the replacement procedure is reduced to inserting the pre-loaded card into the new module and powering up — the application restores automatically without requiring a laptop, engineering software, or network connection. For facilities operating multiple identical machines or skids, a single card image becomes a universal recovery tool, dramatically simplifying spare-parts logistics and reducing mean time to repair (MTTR).Compact Footprint with Scalable I/O ExpansionDespite its modest width, the ABB BCU06-ETH C3 supports up to 10 local S500 I/O modules through its integrated expansion bus. This “pay for what you need” architecture lets OEMs and system integrators add exactly the digital, analog, temperature, or communication modules their application demands — no backplane, no bus coupler, no minimum module count. It is an economical path to building tailored control panels for machines, skids, and utility packages.