Tag: ABB PFSK152 3BSE018877R2

Product Description

ABB PFSK152 3BSE018877R2​is a high-performance PROFIBUS DP Fieldbus Master Interface Module​designed for the ABB S800 I/O system.It acts as the critical gateway,connecting a central controller(such as an AC800M PM/BA unit)to a distributed network of S800 remote I/O stations over the robust PROFIBUS DP network,enabling deterministic and reliable data exchange for process and factory automation.

Application Scenarios

In a sprawling chemical processing plant,a new reactor unit was added hundreds of meters from the central control room.Instrumentation—temperature transmitters,pressure sensors,and control valves—needed to be integrated into the existing ABB System 800xA​DCS.Running individual cables for each point was prohibitively expensive and time-consuming.The solution was to deploy a distributed I/O architecture.A local junction box near the reactor was equipped with an ABB PFSK152 3BSE018877R2​module mounted on a DIN rail.This module,serving as the PROFIBUS DP master,was connected via a single,rugged PROFIBUS cable to a chain of S800 I/O modules collecting all the field signals.Back in the control room,the PFSK152​communicated seamlessly with the AC800M controller over the same network.For the lead engineer,the PFSK152​was the unsung hero:it transformed a complex wiring nightmare into a clean,scalable network,cut installation costs by over 60%,and provided a transparent window into the health of every remote I/O point from the operator’s console,ensuring the safe and efficient startup of the new reactor.

Parameter

Main Parameters

Value/Description

Product Model​

PFSK152​

Manufacturer Code​

3BSE018877R2​

Manufacturer​

ABB

Product Category​

Fieldbus Interface/Communication Module

Compatible System​

ABB S800 Remote I/O System

Fieldbus Protocol​

PROFIBUS DP-V0/V1(Master/Class 1)

Transmission Rate​

9.6 Kbps to 12 Mbps(Automatic Detection)

Physical Interface​

1 x 9-pin D-Sub connector(RS-485)with Terminals

Max.Number of Stations​

Up to 125 slaves(practical limit depends on configuration)

Data Exchange​

Cyclic I/O data,acyclic services for alarms/parameters

Status Indication​

LEDs for Power,Module Status,PROFIBUS Activity,Error

Power Supply​

24 V DC(from S800 power supply module)

Mounting​

DIN-rail mountable

Operating Temperature​

0°C to+60°C

Technical Principles and Innovative Values

The ABB PFSK152 3BSE018877R2​is more than a simple protocol converter;it is an intelligent network manager that brings deterministic,industrial-grade networking to the versatile S800 I/O platform.

Innovation Point 1:Deterministic Master Performance for Real-Time Control

Unlike simple adapters,the PFSK152​operates as a true PROFIBUS DP Master(Class 1).It actively manages the network using a token-passing protocol,polling each configured slave device(other S800 stations with I/O modules)in a defined,cyclic sequence.This deterministic behavior guarantees a maximum cycle time for I/O data updates,which is essential for closed-loop control and fast interlocking logic.Engineers can calculate the worst-case scan time for the entire network,allowing them to design safety and control functions with predictable performance,a critical advantage over non-deterministic networks.

Innovation Point 2:Seamless Integration with the S800 I/O Ecosystem

The module’s design is optimized for plug-and-play operation within the S800 family.Its configuration is performed using ABB’s Control Builder​or Automation Builder​engineering tools.The software provides a unified environment where the engineer simply drags-and-drops the PFSK152​and the connected S800 I/O modules into the hardware configuration.The tool automatically handles address mapping and GSD file integration.This deep integration eliminates manual register mapping and reduces configuration errors,dramatically speeding up commissioning and ensuring data consistency between the field devices and the controller’s application logic.

Innovation Point 3:Comprehensive Diagnostics and Network Supervision

The module provides extensive diagnostic capabilities that extend from the chip level to the network level.Local LEDs give immediate visual feedback on power,operational status,data traffic,and faults.More importantly,detailed diagnostic information is available through the engineering software,including the status of each slave device(configured/actual mismatch,failure)and network parameters.This allows for rapid fault localization—distinguishing between a module failure,a wiring problem,or a configuration error—minimizing Mean Time To Repair(MTTR)and enhancing overall system availability.

Application Cases and Industry Value

Case Study:Modernization of a Municipal Water Treatment Plant

A large city’s aging water treatment facility relied on a hardwired PLC system with failing I/O cards scattered across the site.Maintenance was difficult,and expanding the system for new EU water quality monitoring sensors seemed impossible.The plant embarked on a phased modernization using an ABB AC800M​controller and a distributed S800 I/O architecture.

ABB PFSK152 3BSE018877R2​modules were installed in strategic electrical rooms near the intake pumps,clarifiers,and filter beds.Each PFSK152​created a local PROFIBUS DP network,connecting clusters of new S800 analog and digital I/O modules that replaced the old wiring.The new pH,turbidity,and chlorine analyzers,featuring PROFIBUS interfaces,were daisy-chained directly onto these networks.

The project delivered transformative value:​1.Drastic Reduction in Wiring&Cost:​The single twisted-pair PROFIBUS cables replaced miles of conduit and individual wires,reducing material and labor costs by an estimated 40%.2.Enhanced Operational Insight:​Operators gained real-time visibility from every corner of the plant on a unified 800xA HMI.Trends from the new analyzers helped optimize chemical dosing.3.Future-Proof Flexibility:​Adding a new sensor station became a matter of connecting it to the nearest PFSK152​network and configuring it in software.The plant manager stated,”The PFSK152-based network was the backbone of our digital transformation.It gave us the reliability we needed and the flexibility we wanted for the next 20 years.Troubleshooting is now done from the control room,not in a muddy junction box.”

Related Product Combination Solutions

The PFSK152​is the communication hub for a complete distributed I/O solution.Key related products include:

S800 I/O Modules(e.g.,DI,DO,AI,AO):​The actual signal conditioning modules(e.g.,SD821,SD822,SD823)that connect to field devices and communicate with the PFSK152.

S800 Power Supply Module(e.g.,SD822):​Provides the 24V DC power required for the PFSK152​and the connected I/O modules.

ABB AC800M Controller(e.g.,PM803F,PM861):​The high-level controller that runs the application program and exchanges data with the PFSK152​over the PROFIBUS network.

PROFIBUS Network Components:​High-quality,shielded PROFIBUS cable,connectors,and bus terminators​(often built into the PFSK152​and the last slave)are essential for a stable network.

ABB Automation Builder/Control Builder Engineering Software:​The essential configuration and programming tool for the entire system,including the PFSK152​network setup.

Field Devices with PROFIBUS Interface:​Intelligent sensors,drives,or valve actuators that can be connected directly to the PFSK152​network as slaves,reducing the need for additional I/O cards.

Installation,Maintenance,and Full-Cycle Support

Installation of the ABB PFSK152 3BSE018877R2​is straightforward for trained personnel.It mounts on a standard DIN rail within a control cabinet.Critical steps include providing a clean 24V DC power supply​and ensuring correct network termination​(the terminating resistor switch should be in the”ON”position at both ends of the PROFIBUS segment—typically the PFSK152​and the last slave device).Use of proper shielded cable,grounded at one end only,is mandatory to avoid noise and ensure communication integrity.The module’s front connectors allow for easy daisy-chaining of the PROFIBUS cable to subsequent stations.

Configuration is performed offline in the engineering software.The engineer defines the network parameters and adds all the S800 I/O modules that are physically connected downstream of the PFSK152.After downloading the configuration to the controller,the network typically initializes automatically.During commissioning,the LED indicators are invaluable for verifying power,master activity,and error-free data exchange.

Routine maintenance is minimal but should include periodic visual checks of the module’s status LEDs and ensuring the operating environment remains within specifications.The most common”maintenance”activity is network expansion or reconfiguration,which is greatly simplified by the software-based approach.If a module fails,replacement is simple:power down,swap the unit,and the controller will typically recognize the new module with the same configuration.As a supplier,we provide 100%genuine,factory-new ABB PFSK152 3BSE018877R2​modules.Each unit is sourced from authorized distribution to ensure full compatibility and reliability.We offer technical support for part identification and integration guidance,helping you maintain a robust and efficient distributed control architecture.

选择深圳长欣，选择放心，售后无忧 大量现货，当天顺丰发货！！！