GE IC697PWR724 200W Power Supply Module – SIL2-Ready for GE Fanuc 90-70 Automation
Description
The GE IC697PWR724 is a high-reliability,redundant-capable power supply module designed for the GE Fanuc Series 90-70 programmable logic controller(PLC)system.As a critical component of industrial control infrastructure,it delivers stable,conditioned DC power to the backplane while supporting hot-swap operation and dual-unit redundancy to eliminate single points of failure.
Engineered for continuous operation in demanding environments—from power plants to chemical processing facilities—the GE IC697PWR724 combines robust electrical design,comprehensive self-diagnostics,and compliance with functional safety standards to ensure uninterrupted control system availability.
Application Scenarios
At a major natural gas compression station in Texas,an unexpected power supply failure in the legacy control system caused a 4-hour unplanned shutdown,costing over$250,000 in lost throughput and emergency response.To prevent recurrence,engineers upgraded to a redundant GE IC697PWR724 configuration within their Series 90-70 rack.During a subsequent grid voltage sag,the primary unit seamlessly transferred load to the backup—without interrupting turbine control or safety interlocks.The station has since operated for 18 months with zero power-related outages.In mission-critical automation,the GE IC697PWR724 isn’t just a power converter—it’s the silent guardian of process continuity and operational resilience.
Parameter
Main Parameters Value/Description
Product Model GE IC697PWR724
Manufacturer General Electric(GE Fanuc Automation)
Product Category Redundant AC/DC Power Supply Module for PLC
Input Voltage 85–264 VAC(auto-ranging),47–63 Hz
Output Power 200 W continuous
DC Outputs+5 V 20 A,+3.3 V 10 A(for backplane logic)
Redundancy Support Yes–supports parallel operation with second IC697PWR724
Hot-Swap Capable Yes–can be replaced during system operation
Protection Features Overvoltage,overcurrent,short-circuit,thermal shutdown
Diagnostic Indicators LEDs for POWER OK,FAULT,REDUNDANCY STATUS
Operating Temperature 0°C to+60°C(derating above 50°C)
Compliance&Certifications CE,UL 508,CSA,IEC 61508(SIL2 applicable),RoHS
Technical Principles and Innovative Values
Innovation Point 1:True N+1 Redundancy Architecture
Two GE IC697PWR724 units can operate in parallel with active current sharing.If one fails,the other instantly assumes full load—ensuring zero interruption to CPU,I/O,and communication modules in the Series 90-70 rack.
Innovation Point 2:Intelligent Load Monitoring&Diagnostics
Built-in microcontroller continuously monitors output voltage,temperature,and fan status(if equipped).Fault conditions trigger front-panel LEDs and discrete alarm signals usable by the PLC logic for predictive maintenance.
Innovation Point 3:Wide Input Range for Global Deployment
The GE IC697PWR724 accepts 85–264 VAC without manual switching,making it suitable for both 120V North American and 230V European sites—ideal for multinational OEMs and EPC contractors.
Innovation Point 4:Functional Safety Alignment
While not a safety-rated device itself,the GE IC697PWR724’s reliability and diagnostic coverage support integration into SIL2-compliant systems per IEC 61508 when used in redundant configurations with proper system-level validation.
Application Cases and Industry Value
In a hydroelectric dam modernization project in Canada,the control team replaced aging non-redundant power supplies with dual GE IC697PWR724 modules across six generator control racks.The system now withstands frequent lightning-induced surges on the local grid,with automatic failover verified during quarterly tests.Maintenance logs show a 90%reduction in power-related service calls.Operators particularly value the clear“REDUNDANCY OK”LED—eliminating guesswork during routine inspections.
Similarly,a municipal wastewater treatment plant in Germany integrated the GE IC697PWR724 into its blower and sludge dewatering control panels.Despite high humidity and ambient temperatures near 50°C,the power supplies have operated continuously for over three years.The plant’s automation engineer noted:“Since installing the GE IC697PWR724,we’ve had zero unplanned stops due to power issues—even during summer heatwaves.”
Related Product Combination Solutions
GE IC697CPU782(Series 90-70 Redundant CPU–pairs with redundant power)
GE IC697CHS790(Rack chassis with dual power supply slots)
GE IC697CMM711(Ethernet communication module for remote monitoring)
GE IC697ACC702(Redundancy synchronization cable for dual PSUs)
GE IC697MDL655(32-point digital output module powered by IC697PWR724)
VersaMax IC200PWR001(For hybrid legacy-modern architectures)
GE QuickPanel+HMI(Visualizes PSU status via Ethernet/IP)
ABB REF615 or HIMA FSC(When interfacing 90-70 with external safety systems)
These components form a cohesive,high-availability control architecture where the GE IC697PWR724 serves as the foundational power backbone.
Installation,Maintenance,and Full-Cycle Support
Installation of the GE IC697PWR724 requires mounting in a compatible Series 90-70 rack(e.g.,IC697CHS790)with proper ventilation clearance.For redundancy,two units must be connected via the IC697ACC702 sync cable and configured in the system setup.Wiring follows standard terminal block practices,with input power fused per local codes.The module features automatic recovery after transient faults—no manual reset needed.
Maintenance is minimal:periodic visual inspection of LEDs and cleaning of ventilation slots(if fan-assisted variants are used).The hot-swap design allows replacement without powering down the entire rack—critical for 24/7 operations.All fault modes are logged internally and can be queried via the CPU module.
We supply only factory-new or GE-certified refurbished IC697PWR724 units,each tested for output stability,redundancy handover,and thermal performance.Every unit includes a traceable test report and is backed by a 12-month warranty.Our engineering team provides free pre-sales compatibility checks and post-installation troubleshooting support.
Contact us for a customized solution—whether you’re expanding an existing Series 90-70 system or building a new high-availability control panel,the GE IC697PWR724 delivers the power integrity your industrial processes depend on.
