Home › Articles posted by 白蓉 (Page 185)

Archives

GE-SR469-CASE-469-P1-HI-A20-E缩略图
Company News

GE-SR469-CASE-469-P1-HI-A20-E

GE-SR469-CASE-469-P1-HI-A20-E插图

GE-SR469-CASE-469-P1-HI-A20-E

英文总结

Product Overview:
GE-SR469-CASE-469-P1-HI-A20-E is a motor protection device or power module produced by General Electric, likely part of the GE Multilin 469 motor management relay series.

Technical Specifications:

  • Power Input: Accepts 90-300VDC and 70-265VAC, 48-62Hz.
  • Analog Output: 4 to 20 mA.
  • Display: Enhanced display with optional Ethernet enhancement (10Base-T).
  • Ethernet Port: Integrated on the relay back, indicated by “T” in the part number.

Dimensions and Weight:

  • Specific dimensions and weight are not mentioned in the search results. Refer to the product manual or contact the manufacturer for details.

Series and Features:

  • Series: Part of the GE Multilin 469 motor management relay series.
  • Features: 5A phase secondary, suitable for medium-voltage motors, comprehensive management and protection, power management functions, fault detection and protection, communication interface for remote management and control.

Role:

  • Designed for comprehensive management and protection of medium-voltage motors, ensuring safe and reliable operation of the motor system by providing stable power supply and monitoring motor status.

Note:

  • Information is compiled based on search results. Confirm the latest product information before purchase or use.
参考：

1|爱企查
2|哔哩哔哩
3|哔哩哔哩
4|知乎
+1 更多
GE-SR469-CASE-469-P1-HI-A20-E插图1

GE-SR469-CASE-469-P1-HI-A20-E

 

 

GE-SR469-CASE-469-P1-HI-A20-E插图2

GE-SR469-CASE-469-P1-HI-A20-E

By August 9, 2024
GE-V7768-322001缩略图
Company News

GE-V7768-322001

GE-V7768-322001插图

GE-V7768-322001

关于GE-V7768-322001的产品参数、规格、尺寸、重量、系列、特征和作用，以下是根据搜索结果提供的英文概述：

Product Parameters and Specifications

  • Product Name: GE-V7768-322001 VME Single Board Computer
  • Processor: Intel Core 2 Duo, up to 2.16 GHz
  • Cache: 4 MB L2 Cache
  • Memory: Up to 2 GB DDR2 SDRAM
  • Bus: 667 MHz system and memory bus
  • Storage: Up to 8 GB bootable CompactFlash
  • Expansion: 1 PCI-X PMC expansion slot
  • I/O Ports: 2 RS-232 serial ports, 1 Gigabit Ethernet port
  • Power: +12V, +5V, -12V, 3.3V
  • Power Consumption: <40 W
  • Operating Temperature: 0°C to 55°C
  • Storage Temperature: -40°C to 85°C
  • Humidity: 5% to 95% non-condensing

Dimensions and Weight

  • Dimensions: 233 mm x 167 mm x 23 mm1
  • Weight: Not specifically mentioned in the search results, but can be assumed to be relatively lightweight considering its compact dimensions.

Series

  • Belongs to GE’s VMEbus module series, designed for VMEbus applications.

Features

  • High Performance: Based on the Intel Core 2 Duo processor.
  • High Reliability: Suitable for demanding industrial, military, aerospace, and medical applications.
  • High Scalability: With expansion capabilities through the PCI-X PMC slot.
  • Multiple I/O Ports: Including Gigabit Ethernet and RS-232 serial ports for versatile connectivity.
  • Compact Design: Space-saving dimensions for easy integration.
  • Wide Operating Temperature Range: Ensures stable performance in various environments.

Functions and Applications

  • Data Processing: High-speed data processing capabilities.
  • Industrial Control: Suitable for industrial control applications requiring precise timing and reliable performance.
  • Communication: Enables communication with other devices and systems via Ethernet and serial ports.
  • Expansion: Allows for customization and expansion through additional PMC modules.
  • Application Areas: Industrial control, military, aerospace, medical, scientific research, and other VMEbus applications1.

Note

  • The above information is based on the latest search results available as of the current date (August 9, 2024).
  • For detailed and up-to-date product specifications, please refer to the official GE documentation or contact GE’s customer support.
  • Always ensure compliance with local safety regulations and standards when installing and operating industrial equipment.
参考：

1|深圳长欣自动化设备有限公司

 

 

GE-V7768-322001插图1

GE-V7768-322001

GE-V7768-322001插图2

By August 9, 2024
GE-UR1HH缩略图
Company News

GE-UR1HH

GE-UR1HH插图

GE-UR1HH

Product Parameters and Specifications

  • Product Name: GE-UR1HH Module
  • Type: Industrial Communication and Power Module
  • Communication Interface: RS485
  • Communication Protocol: Modbus RTU, with baud rates ranging from 1200bps to 115200bps (default 9600bps)
  • Power Supply Voltage: 9 ~ 30VDC
  • Operating Temperature Range: -40°C to 85°C

Dimensions and Weight

  • Dimensions: 78mm x 22mm x 109mm
  • Weight: Not specifically mentioned in the search results, but expected to be lightweight for its compact size.

Series

  • Belongs to GE’s industrial communication and control module series, specifically designed for industrial environments.

Features

  • High-speed Data Transmission: Enables efficient data exchange.
  • Rugged Design: Suitable for harsh industrial environments.
  • Wide Operating Temperature Range: Ensures reliable operation in extreme temperatures.
  • Multiple Communication Options: Including RS485 interface and Modbus RTU protocol support.
  • Compact Size: Space-saving design for easy installation and integration.
  • Easy-to-use Interface: Provides user-friendly operation and setup.

Functions and Applications

  • Data Communication: Facilitates data transfer between various industrial devices and systems.
  • Control and Monitoring: Enables remote control and monitoring of industrial processes and equipment.
  • Application Areas: Ideal for use in industries such as chemicals, petroleum, electronics, aerospace, and electrical engineering, where reliable communication and control are crucial1.

Note

  • The above information is based on the available search results and may not cover all aspects of the product.
  • For detailed and up-to-date product specifications, please refer to the official GE documentation or contact GE’s customer support.
  • Product weights and some other specific details may not be directly available in the search results and may require direct inquiry from the manufacturer.
  • Always ensure compliance with local safety regulations and standards when installing and operating industrial equipment.

 

 

 

 

 

 

GE-UR1HH插图1

GE-UR1HH

By August 9, 2024
GE-SD-98762-101-098762-001缩略图
Company News

GE-SD-98762-101-098762-001

Here’s a comprehensive overview of the GE-SD-98762-101-098762-001 product in English, including its parameters, specifications, dimensions, weight, series, features, and functions:

Product Overview

  • Model: GE-SD-98762-101-098762-001
  • Manufacturer: General Electric (GE)

Series

  • Series: This servo controller belongs to the SD series manufactured by GE for industrial automation and mechanical control systems123.

Parameters and Specifications

  • Power Supply: Typically designed for a specific input voltage range, which is usually specified in the official documentation. However, for a general servo controller, it might support voltages around 220V AC4.
  • Output Frequency: High output frequency capabilities, often suitable for precision control applications. Some mention a specific output frequency of 350kHz6, but it may vary based on the model.
  • Servo Motor Control: Designed to control one or more servo motors for precise position and speed control123.
  • Precision and Stability: Offers high-precision motion control capabilities and is stable for long-term operation12.

Dimensions and Weight

  • Dimensions and Weight: The exact dimensions and weight of the GE-SD-98762-101-098762-001 servo controller are not readily available in the search results. These specifications would typically be provided in the product’s official datasheet or on the manufacturer’s website.

Features

  • High-Precision Motion Control: Capable of executing complex positioning, trajectory tracking, and motion control tasks23.
  • Multiple Communication Interfaces: Equipped with various communication interfaces, such as Ethernet, CAN bus, Modbus, and Profibus, for easy integration with other devices and systems123.
  • Programmability and Flexibility: Supports programming functions, allowing users to customize motor control parameters and motion trajectories to suit specific application requirements14.
  • Real-Time Performance: Provides real-time control and response capabilities, ensuring accurate motion control in rapidly changing environments2.
  • Industrial-Grade Design: Constructed with high reliability, anti-interference, and protection features, suitable for industrial environments23.

Functions and Applications

  • Servo Motor Control: Used to control the rotation, linear movement, and other types of motion of servo motors12.
  • Industrial Automation: Integral part of industrial automation and mechanical control systems, providing precision motion control for various machinery and equipment145.
  • Machine Tool Control: Applied in CNC machine tools, robotic systems, and other precision machinery for accurate and repeatable motions14.

Additional Information

  • Since the exact dimensions, weight, and some other specifications of the GE-SD-98762-101-098762-001 servo controller are not available in the search results, it is recommended to consult the product’s official datasheet or contact the manufacturer for the most accurate and up-to-date information.
  • Industrial automation equipment often has complex specifications that require detailed analysis before selecting and integrating into a system. It is important to work with the manufacturer or a qualified professional to ensure proper selection, installation, and operation.

 

GE-SD-98762-101-098762-001插图

GE-SD-98762-101-098762-001

GE-SD-98762-101-098762-001插图1

GE-SD-98762-101-098762-001

GE-SD-98762-101-098762-001插图2

GE-SD-98762-101-098762-001

By August 9, 2024
GE-IS220PDIAH1B缩略图
Company News

GE-IS220PDIAH1B

Here’s a comprehensive overview of the GE-IS220PDIAH1B product in English, including its parameters, specifications, dimensions, weight, series, features, and functions:

Product Overview

  • Model: GE-IS220PDIAH1B
  • Manufacturer: General Electric (GE)

Series

  • Series: The GE-IS220PDIAH1B is part of GE’s industrial automation and sensing product line, specifically designed for industrial applications.

Parameters and Specifications

  • Input Voltage: 120 VAC1
  • Rated Voltage: 24.0 VDC with a maximum rating of 28.6 VDC for the I/O group1
  • Maximum Contact Input Voltage: 32 VDC2
  • Temperature Range: Designed for operation in temperatures ranging from -30°C to +65°C2
  • Processor: Utilizes an ARM-based 32-bit processor for rapid data acquisition and processing3
  • Memory: Equipped with 32M of flash memory for extended data storage3
  • Communication Interfaces: Supports RS-485 and RS-232 standard serial communication interfaces34

Dimensions and Weight

  • Dimensions: Specific dimensions may vary, but similar industrial automation components often have a compact design for easy installation.
  • Weight: Approximately 0.6 pounds (as stated for a different context, but indicative of GE’s industrial component weights)1

Features

  • Multi-Signal Input: Capable of accepting standard current, voltage, thermocouple, and thermistor signals3
  • Isolation and Compensation: Features sensor isolation, relay outputs, temperature and pressure compensation3
  • Display: Equipped with a 5.1-inch 240×128 dot matrix LCD display with LED backlight3
  • Alarm and Monitoring: Provides alarm indication for various thresholds and supports data recording and historical data retrieval35
  • Industrial Design: Constructed with industrial-grade materials for vibration resistance, impact resistance, high temperature resistance, and dust and water resistance5
  • Programmable: Some models may offer programmable functions to configure control logic and parameters according to application requirements5

Functions and Applications

  • Performance Monitoring: Used to monitor performance parameters of gas turbines and other industrial equipment, including temperature, pressure, and vibration5
  • Control Function: Adjusts operating parameters of industrial equipment to meet power demands or other process requirements5
  • Data Exchange: Supports communication interfaces for data exchange with other devices and control systems5
  • Industrial Applications: Widely used in various industries such as power generation, oil and gas, chemicals, manufacturing, aerospace, and marine applications6

Additional Information

  • Please note that the information provided is based on the currently available knowledge and may be subject to change. For the most accurate and up-to-date specifications, please refer to the official documentation provided by GE or contact the manufacturer directly.
  • The GE-IS220PDIAH1B is a specialized industrial automation and sensing component, and its exact features and functions may vary depending on the specific model and intended application.
GE-IS220PDIAH1B插图

GE-IS220PDIAH1B

 

 

 

GE-IS220PDIAH1B插图1

GE-IS220PDIAH1B

By August 9, 2024
GE-IS420UCSBH1A缩略图
Company News

GE-IS420UCSBH1A

GE-IS420UCSBH1A插图

GE-IS420UCSBH1A

Here’s a comprehensive overview of the GE-IS420UCSBH1A product in English, including its parameters, specifications, dimensions, weight, series, features, and functions:

Product Overview

  • Model: GE-IS420UCSBH1A
  • Manufacturer: General Electric (GE)

Series

  • Series: The GE-IS420UCSBH1A belongs to the IS420 series of solid-state relays and/or automation control modules manufactured by GE1.

Parameters and Specifications

  • Rated Current: Available in various ratings, including 10A, 20A, 30A, 40A, and 60A1.
  • Rated Voltage: Supports voltages ranging from 24V AC/DC, 48V AC/DC, 120V AC, to 240V AC1.
  • Control Voltage: Typically 5V DC1.
  • Switching Frequency: 200Hz1.
  • Transient Surge Current: 100A1.
  • Insulation Resistance: Greater than 1000MΩ1.
  • Operating Temperature Range: -40°C to 70°C1.

Dimensions and Weight

  • Dimensions: Height of 8.03 inches, depth of 5.99 inches, and width of 2.17 inches2.
  • Weight: Approximately 2.4 pounds, as mentioned in a context related to UCSB controller modules3. However, the exact weight for the IS420UCSBH1A module may vary; please consult the official documentation for confirmation.

Features

  • Compact Design: Saves space and is suitable for various switching and control applications1.
  • High Reliability: Offers long service life due to its no-contact switching mechanism, which eliminates noise and sparks1.
  • Versatile Load Types: Compatible with both AC and DC loads1.
  • Compliance: Meets various certifications, including UL, CSA, and CE1.
  • Modular Design: Allows for easy expansion and customization to suit different monitoring and control tasks45.
  • Communication Interfaces: Typically equipped with various communication interfaces, such as Ethernet, RS-232, and RS-485, for data exchange with other devices and systems45.

Functions and Applications

  • Monitoring and Control: Used to monitor and control various equipment and signals in industrial processes4.
  • Data Collection: Collects data from sensors, instruments, and monitoring equipment, including analog and digital signals4.
  • Signal Processing: Performs signal filtering, amplification, digitization, and calibration to ensure data accuracy and reliability4.
  • Data Recording and Storage: Supports data recording and storage for future analysis and reporting purposes4.
  • Real-Time Monitoring: Monitors equipment and system status in real-time, as well as various key parameters4.
  • Alarm and Notification: Sets alarm conditions to generate notifications when abnormal situations are detected4.
  • Industrial Automation: Widely used in industrial automation, power system monitoring, equipment status monitoring, fault diagnosis, data collection, and process control applications4.

Additional Information

  • The GE-IS420UCSBH1A is a highly specialized industrial automation component, and its exact features and functions may vary depending on the specific model and intended application.
  • For the most accurate and up-to-date specifications, please refer to the official documentation provided by GE or contact the manufacturer directly.
参考：

1|山西润盛进出口有限公司
2|知乎
3|CSDN博客
4|CSDN博客
+1 更多

 

 

 

 

 

 

GE-IS420UCSBH1A插图1

GE-IS420UCSBH1A

GE-IS420UCSBH1A插图2

GE-IS420UCSBH1A

By August 9, 2024
GE-IS210AEBIH1BED缩略图
Industry trends

GE-IS210AEBIH1BED

GE-IS210AEBIH1BED插图

GE-IS210AEBIH1BED

 

Here’s a comprehensive summary of the GE-IS210AEBIH1BED product in English, including its parameters, specifications, dimensions, weight, series, features, and functions:

Product Overview

  • Model: GE-IS210AEBIH1BED
  • Manufacturer: General Electric (GE)
  • Series: Likely part of the IS210 Series or a related industrial automation and sensing product line

Parameters and Specifications

  • Series Compatibility: Designed to be compatible with the broader IS210 Series or similar GE industrial automation and sensing systems.
  • Performance Characteristics: The GE-IS210AEBIH1BED may offer advanced sensing capabilities, high accuracy, and reliability for demanding industrial applications.
  • Technical Specifications: Detailed technical specifications, such as measurement range, accuracy, resolution, and response time, should be consulted from the manufacturer’s official documentation.

Dimensions and Weight

  • Dimensions and Weight: Exact dimensions and weight information are typically provided in the manufacturer’s product datasheet. Industrial sensors and automation components are often designed for compact installation and easy handling.

Series

  • Series: While the exact series designation may vary, the GE-IS210AEBIH1BED is most likely part of the IS210 Series or a closely related GE industrial automation and sensing product line.

Features

  • Advanced Sensing Technology: Incorporates advanced sensing technology to provide precise and reliable measurements for industrial processes.
  • High Accuracy: Ensures accurate measurement of critical parameters, enabling precise control and monitoring of industrial systems.
  • Rugged Construction: Constructed with durable materials to withstand harsh industrial environments and ensure long-term reliability.
  • Versatility: Suitable for a wide range of industrial applications, including process control, automation systems, and machine monitoring.
  • Ease of Integration: Designed for seamless integration with industrial automation and control systems, reducing installation and setup time.

Functions and Applications

  • Sensing and Measurement: The primary function of the GE-IS210AEBIH1BED is to sense and measure specific parameters within industrial processes, such as temperature, pressure, flow, or other physical quantities.
  • Process Control: Provides critical data to process control systems, enabling operators to make informed decisions and adjust process parameters in real-time.
  • Automation and Monitoring: Integrates with industrial automation systems to automate control and monitoring tasks, improving efficiency and reducing the risk of human error.

Additional Information

  • For precise technical specifications, dimensions, weight, and compatibility details, please refer to the official product documentation provided by GE or contact the manufacturer directly.
  • The GE-IS210AEBIH1BED is a specialized industrial sensing or automation component, and its exact features and functions may vary based on the manufacturer’s specifications and the intended application.
GE-IS210AEBIH1BED插图1

GE-IS210AEBIH1BED

GE-IS210AEBIH1BED插图2

GE-IS210AEBIH1BED

By August 9, 2024
GE-IS200AEADH4ADA缩略图
Company News

GE-IS200AEADH4ADA

GE-IS200AEADH4ADA插图

GE-IS200AEADH4ADA

Here’s a detailed overview of the GE-IS200AEADH4ADA product in English, including its parameters, specifications, dimensions, weight, series, features, and functions:

Product Overview

  • Model: GE-IS200AEADH4ADA
  • Manufacturer: General Electric (GE)
  • Series: Likely part of the IS200 Series or a related industrial automation or sensing product line

Parameters and Specifications

  • Series Compatibility: Designed to be compatible with the broader IS200 Series or similar GE industrial automation and sensing products.
  • Performance Characteristics: The GE-IS200AEADH4ADA may offer advanced sensing capabilities, high accuracy, and fast response times for various industrial applications.
  • Environmental Ratings: Depending on the model, it may be rated for use in harsh industrial environments, with features like dust and water resistance.

Dimensions and Weight

  • Dimensions and Weight: Actual dimensions and weight should be confirmed with the manufacturer’s specifications sheet. However, industrial sensors and automation components are often designed for compact installation and easy handling.

Series

  • Series: While the exact series may not be explicitly stated as “IS200 Series” for this model, it is likely part of a broader GE industrial automation or sensing product line that includes similar products.

Features

  • Advanced Sensing Technology: The GE-IS200AEADH4ADA may incorporate advanced sensing technology to provide accurate and reliable measurements for industrial processes.
  • High Accuracy: Designed to deliver high accuracy measurements, essential for precision control and monitoring in industrial applications.
  • Versatility: May be suitable for a wide range of industrial applications, including process control, machine monitoring, and automation systems.
  • Durability: Constructed with durable materials and designed to withstand the rigors of industrial environments.

Functions and Applications

  • Sensing and Measurement: The primary function of the GE-IS200AEADH4ADA is to sense and measure various parameters in industrial processes, such as temperature, pressure, flow, or other physical quantities.
  • Process Control: Provides critical data for process control systems, enabling operators to monitor and adjust industrial processes in real-time.
  • Automation Integration: Integrates seamlessly with industrial automation systems, allowing for automated control and monitoring of industrial processes.

Additional Information

  • For precise technical specifications, dimensions, weight, and compatibility details, please refer to the official product documentation or contact the manufacturer directly.
  • The GE-IS200AEADH4ADA is a specialized industrial sensing or automation component, and its exact features and functions may vary based on the manufacturer’s specifications and the intended application.
GE-IS200AEADH4ADA插图1

GE-IS200AEADH4ADA

GE-IS200AEADH4ADA插图2

GE-IS200AEADH4ADA

By August 9, 2024
GE-IC698ETM001缩略图
Industry trends

GE-IC698ETM001

GE-IC698ETM001插图

GE-IC698ETM001

 

 

GE-IC698ETM001插图1

GE-IC698ETM001

Certainly, here’s a comprehensive overview of the GE-IC698ETM001 product in English, including its parameters, specifications, dimensions, weight, series, features, and functions:

Product Overview

  • Model: GE-IC698ETM001
  • Manufacturer: General Electric (GE)
  • Series: IC698 Series

Parameters and Specifications

  • Series Compatibility: Designed specifically for the IC698 Series of automation controllers and components from GE.
  • Performance Characteristics: Depending on the model’s specific purpose, it may offer advanced processing capabilities, high-speed communication interfaces, or specialized I/O configurations.
  • Programming and Configuration: Typically supports standard programming and configuration methods used within the IC698 Series.

Dimensions and Weight

  • Dimensions and Weight: Actual dimensions and weight may vary and should be confirmed with the manufacturer’s specifications sheet. However, industrial automation components like the GE-IC698ETM001 are often designed for compact installation and lightweight handling to facilitate easy integration into industrial control systems.

Series

  • Series: IC698 Series
  • The IC698 Series represents a range of advanced automation controllers, processors, and modules designed for complex industrial applications requiring high performance, reliability, and scalability.

Features

  • Specialized Functionality: The GE-IC698ETM001 is likely tailored for a specific function or application within the automation system, such as high-speed data processing, specialized I/O handling, or communication with external devices.
  • Compatibility and Integration: Fully compatible with other IC698 Series components, ensuring seamless integration into existing or new automation systems.
  • Reliability: Engineered for reliable operation in demanding industrial environments, with robust construction and potentially redundant features.
  • Flexibility: Depending on the model, it may offer a range of configurable options to suit different application requirements.

Functions and Applications

  • Dedicated Task Performance: The GE-IC698ETM001 is designed to perform a dedicated task or set of tasks within the industrial automation system, enhancing the overall efficiency and performance of the system.
  • System Integration: Integrates seamlessly with other IC698 Series components, controllers, and peripherals to form a comprehensive automation solution tailored to specific industrial needs.
  • Advanced Control and Monitoring: Enables advanced control strategies and real-time monitoring of industrial processes, helping to optimize production and reduce downtime.

Additional Information

  • For precise technical specifications, dimensions, weight, and compatibility details, please refer to the official product documentation or contact the manufacturer directly.
  • The GE-IC698ETM001 is a specialized component within the IC698 Series, and its exact features and functions may vary based on the manufacturer’s specifications and the intended application.

 

 

 

GE-IC698ETM001插图1

GE-IC698ETM001

GE-IC698ETM001插图2

GE-IC698ETM001

By August 9, 2024
GE-IC698CPE040-JP缩略图
Company News

GE-IC698CPE040-JP

GE-IC698CPE040-JP插图

GE-IC698CPE040-JP

GE-IC698CPE040-JP插图1

GE-IC698CPE040-JP

Here’s a detailed summary of the GE-IC698CPE040-JP product in English, including its parameters, specifications, dimensions, weight, series, features, and functions. Note that the “-JP” suffix may indicate a specific version or localization for the Japanese market, but the core product information remains similar.

Product Overview

  • Model: GE-IC698CPE040-JP
  • Manufacturer: General Electric (GE)
  • Series: IC698 Series
  • Localization: Potentially tailored for the Japanese market or with Japanese language support

Parameters and Specifications

  • Series Compatibility: Belongs to the IC698 Series of GE automation controllers and components.
  • Functionality: A high-performance control processor or module within the IC698 Series, designed to execute complex control logic and manage system operations.

Dimensions and Weight

  • Dimensions and Weight: Specific measurements for dimensions and weight are not provided here due to the need for referring to the manufacturer’s technical documentation. However, industrial control modules like the GE-IC698CPE040-JP are typically designed to be compact and lightweight for easy installation and integration into industrial control systems.

Series

  • Series: IC698 Series
  • This series encompasses advanced automation controllers, processors, and components designed for demanding industrial applications.

Features

  • High-Performance Processing: Equipped with powerful processing capabilities to handle complex control algorithms and high-speed data processing.
  • Localization Support: Potentially includes Japanese language support or documentation, tailored for the Japanese market.
  • Flexibility: Offers flexibility in programming and configuration to meet the specific needs of various industrial applications.
  • Reliability: Designed for reliable operation in harsh industrial environments, with robust components and fault-tolerant features.
  • Connectivity: Provides multiple communication interfaces for seamless integration with other devices, systems, and networks.

Functions and Applications

  • Control Processor: Acts as the central processing unit (CPU) or control processor within the IC698 Series, executing control logic and managing system operations.
  • Industrial Automation: Used in industrial automation applications to control and monitor various processes and equipment.
  • Machine Control: Ideal for machine control applications, providing precise and reliable control over industrial machinery.
  • Data Acquisition and Processing: Capable of acquiring and processing data from various sensors and devices, enabling real-time monitoring and decision-making.

Additional Information

  • For detailed technical specifications, dimensions, weight, and compatibility information, it’s recommended to refer to the official product documentation or contact the manufacturer directly.
  • Note that product offerings and specifications can change over time, and the “-JP” suffix may indicate a specific version or localization. Always consult the latest information from the manufacturer.

The GE-IC698CPE040-JP is a specific product model within the IC698 Series, and its exact features and functions may vary depending on the manufacturer’s specifications and the application for which it is intended.

 

 

GE-IC698CPE040-JP插图2

GE-IC698CPE040-JP

By August 9, 2024
  • Categories
Main Menu
Back to Top

Search For Products

Popular searches
Product has been added to your cart